READY TO RUN 500HP 383 STOKER W/ TH350 IN MICHIGAN!!!!
#1
Junior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
READY TO RUN 500HP 383 STOKER W/ TH350 IN MICHIGAN!!!!
For Sale is a 1970’s Chevrolet 350 that has been bored 30 over and is now a 383. It makes around 500hp and has tons of torque. It currently has about 2,000 miles on it and is just broken in. I have gone through 2 oil changes on it, one at 1,000 miles and the other at 2,000 just before winter of last year. The motor was professionally built and balanced, it was built in July on 2007. I am selling the motor as a complete running motor with a th350 trans. It has also 2,000 miles on it and is a brand new transmission with a 3500 stall and a stage 2 B&M shift kit. About the motor:
- Full SCAT forged rotating assembly (balanced and blueprinted)
- Keith Black HypereutecticFlat top pistons
- 10.5 to 1 compression ratio
- All ARP Studs throughout motor
- Melling High Volume Oil Pump
- Moroso 6qt. oil pan
- Comp Cams 292 Magnum Cam and Lifters
- Comp Cams High Energy Pushrods
- Crane Gold Race Rockers 1.6 ratio
- Dart Pro 1 Heads with 215cc intake runner and 64cc combustion chamber
- Edelbrock Victor Jr. Intake
- Comp Cams Magnum Double Roller Timing Chain
- Wieland High Volume Aluminum Water Pump
- Edelbrock 750cc Carb with vacuum secondaries
- HEI Distributor with Moroso tune-up kit and 8.5mm wires with boot covers
- March V-Belt system
- 5” tall, 14” diameter K&N filter
- 1” Moroso Carb Spacer
- TCI SFI approved flex plate
- Turbo 350 Transmission
- 3500 ******* Stall Converter
- B&M stage 2 shift kit
I also have a set of shorty headers that can go with the motor if it's going into a 3rd gen camaro. Or i do have a complete exhaust to go with it for a 3rd gen for a little extra price. Also availalable is a Holley Blue electric fuel pump that can go with the motor as well. It has only been used with this motor and was installed when the new motor was installed.
I am willing to separate the motor from the trans.
Motor: 5,400
Trans: 600
If you have any questions please contact at 989-780-3828 or via email. It is currently in the car so you can hear it run and drive. I am located in Saginaw, MI and it's about 1.5 hours North of Detroit. Can arrange for delievery or meeting somewhere (within reasonable distance) to pick motor up if gas is paid for by buyer. Thanks
$6,000 OBO
- Full SCAT forged rotating assembly (balanced and blueprinted)
- Keith Black HypereutecticFlat top pistons
- 10.5 to 1 compression ratio
- All ARP Studs throughout motor
- Melling High Volume Oil Pump
- Moroso 6qt. oil pan
- Comp Cams 292 Magnum Cam and Lifters
- Comp Cams High Energy Pushrods
- Crane Gold Race Rockers 1.6 ratio
- Dart Pro 1 Heads with 215cc intake runner and 64cc combustion chamber
- Edelbrock Victor Jr. Intake
- Comp Cams Magnum Double Roller Timing Chain
- Wieland High Volume Aluminum Water Pump
- Edelbrock 750cc Carb with vacuum secondaries
- HEI Distributor with Moroso tune-up kit and 8.5mm wires with boot covers
- March V-Belt system
- 5” tall, 14” diameter K&N filter
- 1” Moroso Carb Spacer
- TCI SFI approved flex plate
- Turbo 350 Transmission
- 3500 ******* Stall Converter
- B&M stage 2 shift kit
I also have a set of shorty headers that can go with the motor if it's going into a 3rd gen camaro. Or i do have a complete exhaust to go with it for a 3rd gen for a little extra price. Also availalable is a Holley Blue electric fuel pump that can go with the motor as well. It has only been used with this motor and was installed when the new motor was installed.
I am willing to separate the motor from the trans.
Motor: 5,400
Trans: 600
If you have any questions please contact at 989-780-3828 or via email. It is currently in the car so you can hear it run and drive. I am located in Saginaw, MI and it's about 1.5 hours North of Detroit. Can arrange for delievery or meeting somewhere (within reasonable distance) to pick motor up if gas is paid for by buyer. Thanks
$6,000 OBO
#4
Junior Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: READY TO RUN 500HP 383 STOKER W/ TH350 IN MICHIGAN!!!!
New price: 5,500 OBO for both the motor and trans or $5000 for motor and $500 for trans.
Really would like to sell the motor, make offer if interested.
Thanks
Dan
Really would like to sell the motor, make offer if interested.
Thanks
Dan
Thread
Thread Starter
Forum
Replies
Last Post