Jeffrey Fontaine

I bought an almost brand new LS1 rear disc setup from a local guy parting out his Camaro, and decided it would be best for me to swap in an entire disc rear w/ 3.23 gears since I only have 2.73's now.

I have everything you need for the swap including the backing plates, rotors, calipers, abutments, bolts, brackets, hard lines & junction block, complete ebrake setup from the bracket at the drum, the e-brake cables, the ebrake bracket in the tunnel, and the 4th gen ebrake handle w/ cable. The rotors are practically brand new, only have surface rust, no ridge whatsoever. i would use them as is without question. The axle seal on one side of the rear end was leaking, so I would probably replace the ebrake drum shoes just to be safe.

Please make me an offer. I would also consider a trade (+cash?) for a 3.23 geared rear-end with posi & PBR discs and the disc/disc proportioning valve. Located in CT, zip 06351. Would consider shipping, but it will probably be $30, maybe more.

Jeffrey Fontaine

TTT.

Complete setup, ready to convert and go big! These are 12" rear discs...

007BALT

I have the disks, and calipers, im intrested in the rest, what do you want for it?

WIll36

iTrader: (12)

I have a full 12" PBR swap with everything except pads including slotted rotors. Would you be interested in working out some kind of trade?

Jeffrey Fontaine

I don't want to break up the kit, rather sell it as-is for a complete conversion.

I'm looking to swap for a complete disc/posi 3.23+ rear end, not just the discs. If I can't find one, then I'll just swap the LS1's onto my 2.73 rear.

Here are pictures, sorry for the mess in the pic w/ the ebrakes and 4th gen handle/tunnel bracket.




Thanks,
Jeff

Jeffrey Fontaine

Still available...

Would prefer not to ship but a few have asked so I'm going to figure out packing them up and weights and get back to the PMs (new baby!).

Jeff

Jeffrey Fontaine

Still available... $225+ shipping OBRO.

Remember, these rotors are near mint (no wear ridge, just surface rust).

Jeff

Jeffrey Fontaine

I can't believe these haven't sold yet
Price drop again, $200 +shipping, OBRO.

Would like these gone by the middle of the month...

jonarotz

iTrader: (26)

If you were going to seperate I might be interested in the rotors. let me know what you would want for them.

Jeffrey Fontaine

Well I guess I'll give it 2 wks, if no one takes the whole setup I'll split it up - rotors for you, and the rest for 007BALT.

jonarotz

iTrader: (26)

What kind of price shipped to 44134? I want to make sure it is worth both of our time first.

pr0zac

i have a 9" for a third gen i am looking to sell. its got 1990 iroc disk brakes and calipers mounted. it also has an aluminum center, 35 spline axles, 4.56 gears and a spool. if you are interested in a trade plus you give me some cash.. email me at joshua.huber@hotmail.com.

Jeffrey Fontaine

Pending sale, if it falls through, i'll repost.