gregs78cam

I am looking to sell my 383 that I built back in the winter of '03/'04. It has approximatly 20K on it. It made 200psi compression this summer before I dynoed the car. It put down 340hp @ 5200rpm, and 370lb-tq @ 4000rpm. It is a first-gen (2pc rear main) 4 bolt block, bored .040 over and 9.000" deck. It has Trickflow heads, Jesel belt drive, custom Comp Roller cam with 4/7 swap(adv dur - 270/280, .050 dur - 219/224, .526/.525 lift, 110 LSA) and matching springs with Summit Aluminum roller rockers. A Forged 5140 Crank, Eagle 6" H-beam rods, Probe Forged pistons @ approx. 10.2 to one, and C&A ZeroGap rings round out the rotating asssembly. Everything held together with ARP studs and felpro blue rubber re-usable oil pan and valve cover gaskets. This thing makes awesome torque(over 350lbs from 3K-5K Rpm), and from my research should compliment a modded TPI pretty well. And remeber "roller cam" - a simple cam change(easy with belt drive timing) and you can tailor the power curve to your liking. I will let it go for the first $3000. This price wounld't even cover parts alone to build it yourself. Other parts on the engine are negotiable and include RPM AirGap manifold, TCI Rattler balancer, CSI electric water pump, Edelbrock 750, Accel HEI, Chrome oil pan and black powdercoated MT Aluminum Valve covers. If it doesn't sell its going in my plow "truck". Thanks for looking. By the way the pics are from when I built it, more are at

https://www.thirdgen.org/forums/engi...3-383-t56.html


Greg

Email direct to gregs78cam at hotmail, or gregs78camaro at yahoo.