AFR Eliminator #1040's!
#151
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,724
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: AFR Eliminator #1040's!
find a set of 113 L98 heads and have Lloyd Elliott work them over, keeping a 1.94 valve. Still get some lift out of that on a 305. MAYBE a 2.00 valve but 2.02 is gonna limit things alot. He can get decent numbers out of those heads ~$800 for LE1 setup which includes all machine work, cleaning, porting, and valvesprings. LE2 is 1000 and is setup for either 2.00 or 2.02 valve
While the 350 vs 305 wars will always rage on in the forums, AFR's market isn't exactly geared towards those smaller motors. In fact, a majority of the test mules AFR uses are 383s.
Heck, I have 195s on my motor and I'm at 412 inches.
-- Joe
#152
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR Eliminator #1040's!
find a set of 113 L98 heads and have Lloyd Elliott work them over, keeping a 1.94 valve. Still get some lift out of that on a 305. MAYBE a 2.00 valve but 2.02 is gonna limit things alot. He can get decent numbers out of those heads ~$800 for LE1 setup which includes all machine work, cleaning, porting, and valvesprings. LE2 is 1000 and is setup for either 2.00 or 2.02 valve
Maybe even a set of as cast 113's. All depends on your combination.
#153
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR Eliminator #1040's!
The 180's would still probably have good velocity numbers, which I suspect is what he is concerned with regarding the valve size.
While the 350 vs 305 wars will always rage on in the forums, AFR's market isn't exactly geared towards those smaller motors. In fact, a majority of the test mules AFR uses are 383s.
Heck, I have 195s on my motor and I'm at 412 inches.
-- Joe
While the 350 vs 305 wars will always rage on in the forums, AFR's market isn't exactly geared towards those smaller motors. In fact, a majority of the test mules AFR uses are 383s.
Heck, I have 195s on my motor and I'm at 412 inches.
-- Joe
#157
Junior Member
Join Date: Jun 2004
Location: Indianapolis, IN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 IROC
Transmission: T56
Re: AFR Eliminator #1040's!
I have been in contact with Rick and Jim on these heads for a couple of years now and was just recently able to finally make the purchase. I can't thank them both enough for their patience and understanding. Frustrating on their end I'm sure to have to have dealt with me for so long....but...often times, that's how life deals the cards. These guys are legit. No worries there. Yes...as someone earlier posted up, you receive a Sales Order Receipt directly from AFR and these heads are shipped directly from AFR to you. I receive my heads the other day and I have to say, they are true works of art from an engineering standpoint. Crazy sexy. I can't wait till I get these heads put to use. It's going to be a while for my build, but I just simply had to take these guys up on this offer to save a few bux. When doing a build from scratch...anyone that's done that, knows that this process can nickle and dime you to death. So...anywhere and anyway that you can save some coin....it's in your best interest to do so. I wouldn't hesitate for a second to do business with these guys again. It's great to have these kinds of opportunities.
(And no...I wasn't paid to say these great things and no, I didn't get any additional discount than what's offered here to everyone else...it's just plain, simple, black and white facts that these guys are for real just as the AFR heads are as well.)
(And no...I wasn't paid to say these great things and no, I didn't get any additional discount than what's offered here to everyone else...it's just plain, simple, black and white facts that these guys are for real just as the AFR heads are as well.)
#158
Senior Member
iTrader: (2)
Join Date: Dec 2009
Location: NJ
Posts: 784
Likes: 0
Received 2 Likes
on
2 Posts
Car: 87 Z28
Engine: AFR 383
Transmission: 700R4
Axle/Gears: 4:11
Re: AFR Eliminator #1040's!
(And no...I wasn't paid to say these great things and no, I didn't get any additional discount than what's offered here to everyone else...it's just plain, simple, black and white facts that these guys are for real just as the AFR heads are as well.)
x2 on great business
#159
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR Eliminator #1040's!
I have been in contact with Rick and Jim on these heads for a couple of years now and was just recently able to finally make the purchase. I can't thank them both enough for their patience and understanding. Frustrating on their end I'm sure to have to have dealt with me for so long....but...often times, that's how life deals the cards. These guys are legit. No worries there. Yes...as someone earlier posted up, you receive a Sales Order Receipt directly from AFR and these heads are shipped directly from AFR to you. I receive my heads the other day and I have to say, they are true works of art from an engineering standpoint. Crazy sexy. I can't wait till I get these heads put to use. It's going to be a while for my build, but I just simply had to take these guys up on this offer to save a few bux. When doing a build from scratch...anyone that's done that, knows that this process can nickle and dime you to death. So...anywhere and anyway that you can save some coin....it's in your best interest to do so. I wouldn't hesitate for a second to do business with these guys again. It's great to have these kinds of opportunities.
(And no...I wasn't paid to say these great things and no, I didn't get any additional discount than what's offered here to everyone else...it's just plain, simple, black and white facts that these guys are for real just as the AFR heads are as well.)
(And no...I wasn't paid to say these great things and no, I didn't get any additional discount than what's offered here to everyone else...it's just plain, simple, black and white facts that these guys are for real just as the AFR heads are as well.)
thanks brother for the kind words.
#162
Re: AFR Eliminator #1040's!
I could use a set of 1040 eliminators. How's the current availability/lead time? Still 3-4 weeks out?
Shoot me a pm with pricing/payment details when you have a chance.
Thanks.
Shoot me a pm with pricing/payment details when you have a chance.
Thanks.
#165
Member
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: AFR Eliminator #1040's!
Let me know when you get a set of the 75cc versions.
#167
Member
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: AFR Eliminator #1040's!
pm me what you guys get them for im thinking next month or month after for sure. I need to drop my compression from 11:1 with iron heads so I can run 93 with no worries
#168
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR Eliminator #1040's!
These heads are $1488 at summit racing.
http://www.summitracing.com/search/?...=AFR1040&dds=1
#170
Supreme Member
iTrader: (26)
Join Date: Nov 2002
Location: Moneta, VA
Posts: 2,108
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 formula 350
Engine: ls1 magnuson tvs2300 supercharger
Transmission: T56
Axle/Gears: 4.11 Dana 44!
Re: AFR Eliminator #1040's!
this is one of the longest running for sale threads I've ever seen!
#185
Member
iTrader: (7)
Join Date: Jun 2004
Location: Chicago south suburbs
Posts: 489
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z28
Engine: L98(383tpi) modified
Transmission: 700R4 rebuilt
Axle/Gears: 3:73 10bolt rebuilt
Re: AFR Eliminator #1040's!
I Ordered the AFR #210's Saturday, and I can't wait to get them on!
#186
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR Eliminator #1040's!
I have had two people pm me in regards to how the AFR's compare to the GM Fastburns.
If you compare the Fastburns (I think they are 210cc), and compare those to a AFR 210, I really dont think the Fastburns will hold a candle to the AFR's.
Not sure what other people's opinions are.....
If you compare the Fastburns (I think they are 210cc), and compare those to a AFR 210, I really dont think the Fastburns will hold a candle to the AFR's.
Not sure what other people's opinions are.....
#194
Supreme Member
iTrader: (35)
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,229
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: AFR Eliminator #1040's!
Could you PM me on a price qoute on the vortec style also?
#199
Member
iTrader: (7)
Join Date: Jun 2004
Location: Chicago south suburbs
Posts: 489
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 IROC-Z28
Engine: L98(383tpi) modified
Transmission: 700R4 rebuilt
Axle/Gears: 3:73 10bolt rebuilt
Re: AFR Eliminator #1040's!
Rick thank you for getting the AFR 210's for me.
I can not believe the difference in power from my Edelbrock Performers to the AFR'S. It is like night and day. If anyone is debating if its worth the money to upgrade their heads from say a set like mine. all I can say is you won't be disappointed. Rick also was very helpful through the whole process. Thanks again Rick!
I can not believe the difference in power from my Edelbrock Performers to the AFR'S. It is like night and day. If anyone is debating if its worth the money to upgrade their heads from say a set like mine. all I can say is you won't be disappointed. Rick also was very helpful through the whole process. Thanks again Rick!
#200
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR Eliminator #1040's!
Rick thank you for getting the AFR 210's for me.
I can not believe the difference in power from my Edelbrock Performers to the AFR'S. It is like night and day. If anyone is debating if its worth the money to upgrade their heads from say a set like mine. all I can say is you won't be disappointed. Rick also was very helpful through the whole process. Thanks again Rick!
I can not believe the difference in power from my Edelbrock Performers to the AFR'S. It is like night and day. If anyone is debating if its worth the money to upgrade their heads from say a set like mine. all I can say is you won't be disappointed. Rick also was very helpful through the whole process. Thanks again Rick!