GARAGE SALE - LOTS OF PARTS !!!
#1
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
GARAGE SALE - LOTS OF PARTS !!!
All parts came off of my 1987 IROC 5.7 350 TPI. All are in working condition UNLESS otherwise noted.
- Stock Water Pump (works great, upgraded to an aluminum one) $60
- Tilton Starter (needs rebuild) - $50 (over $400 new!)
- K&N Cone Air Filter (for cold air intake - I upgraded to a bigger one) $25
- Pair of T-Tops (Glass...NOT Lexan): Latch works fine, secures to roof properly. $150
- stock 350 cylinder heads (one in good shape, the other needs to be rebuilt...from an overheating problem last year) $75
- stock TPI Runners/Plenum/Intake/Air Filter base: -$150 for all, *will seperate if needed*
-Stock Fuel Rail w/ 5 injectors attached $50
- stock TPI 350 Throttle Body $50
- Air Foil for Throttle Body $25 (will sell with throttle body..$65 for both)
- stock Parking Lamps (Pair): used, but no cracks $25
- stock Amber Turn Signals (Pair) used, but no cracks $25
OTHER GM PARTS
- stock GM 2 Barrel Carburetor (off 1978 Pontiac): needs rebuilding, $25
- stock GM Intake Manifold w/ 160* thermostat (off 1978 Pontiac): $25
- 14x6 steel wheels (4 of them), all hold air: $20 each, $75 for all 4
- stock GM air cleaner/single snorkel (w/ almost new air filter included): $50
SOLD
- Edelbrock Shorty TES Headers w/ Y-Pipe AND Magnaflow High-Flow Catalytic Converter - both headers is good used shape. no holes, tight seals. Y-Pipe and Magnaflow Cat are almost brand-new..used for less than one month before removal! $350 (All this would cost around $600 new...save some cash!!)*I Have pics!* ***SOLD***
- Toyo Proxes FZ4 Tires - Set of 4 (tread life is around 50% on 3 tires, 75% on 1 - all hold air) Retail for a set of 4 is $450. Asking $150 or Best Offer. ***SOLD***
- Stock TPI dual fans setup (w holder & pigtails.. swapped out for higher flow dual fans) $75 ***SOLD***
- Stock radiator (swapped out for high performance aluminum rad) $60 ***SOLD***
- Edelbrock Y Pipe (for shorty headers..swapped out for different exhaust setup) $50 ***SOLD***
- Flowmaster muffler (3 inch in/out) w angle cut pipes. Also has the over the axle pipe still attached (I believe the muffler is a 40 series or American Thunder muffler.. was on the car when purchased from last owner who didnt remember which one...it is on the louder side FYI...great sound...I swapped out for a newer setup) $125 ***SOLD***
- *BRAND NEW- NEVER USED/MOUNTED* Magnaflow slash cut exhaust tips - 24 inches long, 2.5 in, 3.5 out $85 (retail for $120 from Summit Racing) ***SOLD***
- MSD BTM (Boost Timing Controller): works great. used with my Vortech blower. have no use for it on my current motor. $125 ***SOLD***
- Hollow 3 inch in/out catalytic converter $20 ***SOLD***
PLEASE PM ME IF YOU ARE INTERESTED IN ANY OF THESE PARTS. I AM LOCATED IN NEW JERSEY...ABOUT 15 MIN FROM NYC.
WILL SHIP ALL PARTS - BUYER RESPONSIBLE FOR SHIPPING FEES. LOCAL PICK UP IS OKAY TOO.
- Stock Water Pump (works great, upgraded to an aluminum one) $60
- Tilton Starter (needs rebuild) - $50 (over $400 new!)
- K&N Cone Air Filter (for cold air intake - I upgraded to a bigger one) $25
- Pair of T-Tops (Glass...NOT Lexan): Latch works fine, secures to roof properly. $150
- stock 350 cylinder heads (one in good shape, the other needs to be rebuilt...from an overheating problem last year) $75
- stock TPI Runners/Plenum/Intake/Air Filter base: -$150 for all, *will seperate if needed*
-Stock Fuel Rail w/ 5 injectors attached $50
- stock TPI 350 Throttle Body $50
- Air Foil for Throttle Body $25 (will sell with throttle body..$65 for both)
- stock Parking Lamps (Pair): used, but no cracks $25
- stock Amber Turn Signals (Pair) used, but no cracks $25
OTHER GM PARTS
- stock GM 2 Barrel Carburetor (off 1978 Pontiac): needs rebuilding, $25
- stock GM Intake Manifold w/ 160* thermostat (off 1978 Pontiac): $25
- 14x6 steel wheels (4 of them), all hold air: $20 each, $75 for all 4
- stock GM air cleaner/single snorkel (w/ almost new air filter included): $50
SOLD
- Edelbrock Shorty TES Headers w/ Y-Pipe AND Magnaflow High-Flow Catalytic Converter - both headers is good used shape. no holes, tight seals. Y-Pipe and Magnaflow Cat are almost brand-new..used for less than one month before removal! $350 (All this would cost around $600 new...save some cash!!)*I Have pics!* ***SOLD***
- Toyo Proxes FZ4 Tires - Set of 4 (tread life is around 50% on 3 tires, 75% on 1 - all hold air) Retail for a set of 4 is $450. Asking $150 or Best Offer. ***SOLD***
- Stock TPI dual fans setup (w holder & pigtails.. swapped out for higher flow dual fans) $75 ***SOLD***
- Stock radiator (swapped out for high performance aluminum rad) $60 ***SOLD***
- Edelbrock Y Pipe (for shorty headers..swapped out for different exhaust setup) $50 ***SOLD***
- Flowmaster muffler (3 inch in/out) w angle cut pipes. Also has the over the axle pipe still attached (I believe the muffler is a 40 series or American Thunder muffler.. was on the car when purchased from last owner who didnt remember which one...it is on the louder side FYI...great sound...I swapped out for a newer setup) $125 ***SOLD***
- *BRAND NEW- NEVER USED/MOUNTED* Magnaflow slash cut exhaust tips - 24 inches long, 2.5 in, 3.5 out $85 (retail for $120 from Summit Racing) ***SOLD***
- MSD BTM (Boost Timing Controller): works great. used with my Vortech blower. have no use for it on my current motor. $125 ***SOLD***
- Hollow 3 inch in/out catalytic converter $20 ***SOLD***
PLEASE PM ME IF YOU ARE INTERESTED IN ANY OF THESE PARTS. I AM LOCATED IN NEW JERSEY...ABOUT 15 MIN FROM NYC.
WILL SHIP ALL PARTS - BUYER RESPONSIBLE FOR SHIPPING FEES. LOCAL PICK UP IS OKAY TOO.
Last edited by RiggsLW81; 03-21-2012 at 11:06 AM.
#3
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
located in the Meadowlands area...5 min from Giants Stadium.
interested in any parts?
interested in any parts?
#4
Member
iTrader: (1)
Join Date: Mar 2009
Location: Columbia SC
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS
Engine: 3.1 liter
Transmission: 700r4
Axle/Gears: positrac off an 83 T/A
Re: GARAGE SALE - LOTS OF PARTS !!!
how much use is on the cat and what are the dimensions of the y-pipe?
#5
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
the cat converter only seen a few thousand miles, the car isnt driven a regular basis..
the y pipe is this exact one:
http://www.summitracing.com/parts/EDL-65930/
the y pipe is this exact one:
http://www.summitracing.com/parts/EDL-65930/
#7
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
there really heavy, about 40lbs each at least. i would think between $50-75 to ship..can get u an exact cost if your serious about purchasing.
Trending Topics
#9
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
thats fine..1st with cash gets the parts..
when do u anticipate being able to buy them?
when do u anticipate being able to buy them?
#10
Supreme Member
iTrader: (2)
Join Date: Mar 2002
Location: West Houston, Tx.
Posts: 1,029
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: GARAGE SALE - LOTS OF PARTS !!!
you email me any pics of the exhaust stuff you got so I can decide to buy or not...
abailey79@hotmail.com
abailey79@hotmail.com
#11
Senior Member
Join Date: Jan 2008
Location: SoCal 909
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS vert/ 89 iroc vert
Engine: 305 TBI/305 TPI
Transmission: 700r4Xtwo
Axle/Gears: 10 bolt non-pos. B/W 9 bolt pos
Re: GARAGE SALE - LOTS OF PARTS !!!
does the cat have the A.I.R set up
#12
Junior Member
iTrader: (4)
Join Date: Aug 2007
Location: Brunswick, Ohio
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Re: GARAGE SALE - LOTS OF PARTS !!!
Did you sell the cylinder heads yet? They are center bolt style right? they should be anyway if they're from an 87. How much for shipping to 44212??
#13
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
here are answers to the last 3 posts..sorry its taken awhile, been busy..
DrewsCam- I will email you the exhaust pics this weekend.
JMR- No it doesnt have AIR set up, the cat is hollow
25th92RS - Yes, I still have the heads, they are from my original 87 motor. Shipping will be in the neighborhood of $50-ish. Could be abit more, would need to go to post office for exact estimate. Want them?
DrewsCam- I will email you the exhaust pics this weekend.
JMR- No it doesnt have AIR set up, the cat is hollow
25th92RS - Yes, I still have the heads, they are from my original 87 motor. Shipping will be in the neighborhood of $50-ish. Could be abit more, would need to go to post office for exact estimate. Want them?
#14
Junior Member
iTrader: (4)
Join Date: Aug 2007
Location: Brunswick, Ohio
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS, 2000 Z28
Engine: LO3 with TPI Swap, LS1
Transmission: 700-R4, 4L60E
Axle/Gears: 3.42 with TruTrac LSD
Re: GARAGE SALE - LOTS OF PARTS !!!
yeah, get me a for sure number on the shipping and I'll see what I can do for ya!
#15
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
Shiping the heads to you will be approximately $56, but I'll still ship them to you at $50..I just want the heads gone.
Let me know.
Let me know.
#17
Junior Member
Join Date: Jul 2008
Location: North Charleston
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 5.7Fl V8 350 tpi
Transmission: 700R4 Automatic
Re: GARAGE SALE - LOTS OF PARTS !!!
I would definatly like the fan setup. The first one with the money right? How much would it be to ship it to 29418 or South Carolina.
#18
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
Ownor- the tips look like this- they are brand new & never mounted:
http://www.magnaflow.com/02product/s...e=main&id=8331
GadeXTrigger - the dual fan set-up is yours, shipping there would be approx $15-20. want it?
http://www.magnaflow.com/02product/s...e=main&id=8331
GadeXTrigger - the dual fan set-up is yours, shipping there would be approx $15-20. want it?
#19
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
bump...the holidays are just around the corner..treat urself to some quality parts for cheap!
#24
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
Yes, I have exhaust pics...(I sent you a PM)
Yes, I will ship exhaust, but you pay for shipping, as stated.
Yes, I will ship exhaust, but you pay for shipping, as stated.
#27
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
Spring is around the corner...who needs cheap parts to get up and running?
#30
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
BUMP...
also updated with more parts for sale!!! check the original post for new items including parking lamps, amber turn signals, MSD ignition, and more !!!
also updated with more parts for sale!!! check the original post for new items including parking lamps, amber turn signals, MSD ignition, and more !!!
Last edited by RiggsLW81; 08-10-2010 at 12:16 PM.
#36
Junior Member
Join Date: Mar 2010
Location: Pa-lancaster/johnstown
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 GTA
Engine: 305 TPI
Transmission: soon to be t56
Axle/Gears: 3.73 posi
Re: GARAGE SALE - LOTS OF PARTS !!!
price shipped to 17601 for the 6al and the intake manifold?
#38
Supreme Member
iTrader: (5)
Join Date: Aug 2007
Location: Milwaukee, Wisconsin
Posts: 1,525
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: GARAGE SALE - LOTS OF PARTS !!!
You never answered my pm about the cat ad the plug wires.
#39
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
The items are $150...shipping will be (approximately) $50 (intake is really heavy)... so $200 shipped for everything.
to those interested in MSD plug wires, they are no longer being sold. sorry.
ZACHERYHORN - please PM your email address. I have pics of parking lamps you requested to send to you...
RACING GEEK - you have a PM
to those interested in MSD plug wires, they are no longer being sold. sorry.
ZACHERYHORN - please PM your email address. I have pics of parking lamps you requested to send to you...
RACING GEEK - you have a PM
#42
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
TTT...Edelbrock Headers w/ Y-Pipe a & Magnaflow High-Flow Cataytic Converter added to list!
Last edited by RiggsLW81; 10-29-2010 at 12:29 PM.
#46
Senior Member
iTrader: (5)
Join Date: Sep 2006
Location: Austria
Posts: 951
Likes: 0
Received 2 Likes
on
2 Posts
Car: 84 TA / 89 Formula
Engine: LS1 / L03
Transmission: T56 / 700R4
Axle/Gears: 3.73 / 3.27
Re: GARAGE SALE - LOTS OF PARTS !!!
- *BRAND NEW- NEVER USED/MOUNTED* Magnaflow slash cut exhaust tips - 24 inches long, 2.5 in, 3.5 out $85 (retail for $120 from Summit Racing)
- MSD BTM (Boost Timing Controller): works great. used with my Vortech blower. have no use for it on my current motor. $125
- stock Parking Lamps (Pair): used, but no cracks $25
- stock Amber Turn Signals (Pair) used, but no cracks $25
- MSD BTM (Boost Timing Controller): works great. used with my Vortech blower. have no use for it on my current motor. $125
- stock Parking Lamps (Pair): used, but no cracks $25
- stock Amber Turn Signals (Pair) used, but no cracks $25
Thx
ownor
#47
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
Hi Ownor - The MSD Box looks lke any other MSD box, red in appearance, it has the Vortech Supercharger logo on it, and says Ignition & Boost Controller on it. wires/hooks up come with it...im even throwing in the MSD Boost Retard **** w/ wires.
I have pics of the parking lamps if you want to see, the amber turn signals are stock, they look like every other camaro turn signals - no different. PM me your email for pics.
the exhaust tips are brand new as well...
do you want to purchase these items? let me know
I have pics of the parking lamps if you want to see, the amber turn signals are stock, they look like every other camaro turn signals - no different. PM me your email for pics.
the exhaust tips are brand new as well...
do you want to purchase these items? let me know
#48
Senior Member
iTrader: (5)
Join Date: Sep 2006
Location: Austria
Posts: 951
Likes: 0
Received 2 Likes
on
2 Posts
Car: 84 TA / 89 Formula
Engine: LS1 / L03
Transmission: T56 / 700R4
Axle/Gears: 3.73 / 3.27
Re: GARAGE SALE - LOTS OF PARTS !!!
ok i didn't notice the lamps were for a camaro, i can't use them in this case, sorry.
for the msd box, does it say MSD 6 BTM CD or something similar on it? and the **** is normally included anyways
i might consider the tips if we get a deal for the BTM box.
thanks for the infos.
l8rs
for the msd box, does it say MSD 6 BTM CD or something similar on it? and the **** is normally included anyways
i might consider the tips if we get a deal for the BTM box.
thanks for the infos.
l8rs
#49
Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: New Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 350 (5.7L)
Transmission: 700R4 (Auto)
Re: GARAGE SALE - LOTS OF PARTS !!!
sent you a private email Ownor. (and I have seen the box and **** sold seperately on different f-body sites & ebay..thats why I said I'm including it for free with the box purchase)
please get back to me at your convenience. thank you.
please get back to me at your convenience. thank you.
#50
Senior Member
iTrader: (5)
Join Date: Sep 2006
Location: Austria
Posts: 951
Likes: 0
Received 2 Likes
on
2 Posts
Car: 84 TA / 89 Formula
Engine: LS1 / L03
Transmission: T56 / 700R4
Axle/Gears: 3.73 / 3.27
Re: GARAGE SALE - LOTS OF PARTS !!!
for anyone interested in the vortech MSD BTM, this link might be interesting.
according to this and other sources, the Vortech version does only retard timing, but doesn't make use of MSD's CD ignition system!
according to this and other sources, the Vortech version does only retard timing, but doesn't make use of MSD's CD ignition system!