lots of tpi stuff--harnesses--computers--everything
#51
Re: lots of tpi stuff--harnesses--computers--everything
Is the complete TPI unit still available? I didnt get a response. I'm very interested if it is-but I need to know fast. I have 2 other possible sellers who are waiting to hear back from me.
is this from a 305 or a 350?
is this from a 305 or a 350?
#52
Senior Member
Thread Starter
iTrader: (103)
Join Date: Apr 2005
Location: townsend, mass.
Posts: 576
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: lots of tpi stuff--harnesses--computers--everything
yes i have the fuel pump. yes i still have it. i have one setup off 5.0 and one off 5.7. yes 89 had no cold start injector and had the maf.
#54
Re: lots of tpi stuff--harnesses--computers--everything
zip is 23229.
Im not far away from you, so if you can get me a complete tpi conversion with fuel pump shipped for 350 I'll take it. assuming the runners are in good shape.
Im not far away from you, so if you can get me a complete tpi conversion with fuel pump shipped for 350 I'll take it. assuming the runners are in good shape.
#57
Senior Member
Thread Starter
iTrader: (103)
Join Date: Apr 2005
Location: townsend, mass.
Posts: 576
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: lots of tpi stuff--harnesses--computers--everything
ok. i have the whole intake setup with 5.7 injectors. the engine wiring harness and computer. the maf sensor. distributor and throttle cable. i will take some pics and post them in a few hours. if you check back around 6. i can do $350. even though your in va. it should be about $100 to ship. its about 85# between both boxes.
#58
Re: lots of tpi stuff--harnesses--computers--everything
ok. i have the whole intake setup with 5.7 injectors. the engine wiring harness and computer. the maf sensor. distributor and throttle cable. i will take some pics and post them in a few hours. if you check back around 6. i can do $350. even though your in va. it should be about $100 to ship. its about 85# between both boxes.
please confirm, is that 350 shipped?
also, does that include the other sensors as well or just the MAF?
if you happen to have a TPI fuel sending unit and a few inches of the harness to the sending unit i'd be more than happy to purchase that off of you as well.
Pending some pics, some simple answers and trading some paypal information, I'd say we will both be very happy by the end of today.
#59
Senior Member
Thread Starter
iTrader: (103)
Join Date: Apr 2005
Location: townsend, mass.
Posts: 576
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: lots of tpi stuff--harnesses--computers--everything
you're a good man.
please confirm, is that 350 shipped?
also, does that include the other sensors as well or just the MAF?
if you happen to have a TPI fuel sending unit and a few inches of the harness to the sending unit i'd be more than happy to purchase that off of you as well.
Pending some pics, some simple answers and trading some paypal information, I'd say we will both be very happy by the end of today.
please confirm, is that 350 shipped?
also, does that include the other sensors as well or just the MAF?
if you happen to have a TPI fuel sending unit and a few inches of the harness to the sending unit i'd be more than happy to purchase that off of you as well.
Pending some pics, some simple answers and trading some paypal information, I'd say we will both be very happy by the end of today.
#60
Senior Member
Thread Starter
iTrader: (103)
Join Date: Apr 2005
Location: townsend, mass.
Posts: 576
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: lots of tpi stuff--harnesses--computers--everything
you're a good man.
please confirm, is that 350 shipped?
also, does that include the other sensors as well or just the MAF?
if you happen to have a TPI fuel sending unit and a few inches of the harness to the sending unit i'd be more than happy to purchase that off of you as well.
Pending some pics, some simple answers and trading some paypal information, I'd say we will both be very happy by the end of today.
please confirm, is that 350 shipped?
also, does that include the other sensors as well or just the MAF?
if you happen to have a TPI fuel sending unit and a few inches of the harness to the sending unit i'd be more than happy to purchase that off of you as well.
Pending some pics, some simple answers and trading some paypal information, I'd say we will both be very happy by the end of today.
#61
Member
Join Date: Nov 2004
Location: Sacramento, CA
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28 Convertible
Engine: 305
Transmission: 5 Speed
Re: lots of tpi stuff--harnesses--computers--everything
Memcal from an 87 350, 700R4, MAF, dual fans? 88 may be the same I'm told. Just can't have VATS. Possibly the number is ABWN 8656
#62
Re: lots of tpi stuff--harnesses--computers--everything
I like it!
how much for the remaining sensors and the sending unit?
feel free to call me at 804-873-4643 if you'd like. im about to go in for a night shift. ill be up lol.
how much for the remaining sensors and the sending unit?
feel free to call me at 804-873-4643 if you'd like. im about to go in for a night shift. ill be up lol.
#63
Re: lots of tpi stuff--harnesses--computers--everything
I am talking to just 1 other person about their unit-damn work.... may need to wait till tomorrow to get some final info from them before committing to the purchase
#65
Re: lots of tpi stuff--harnesses--computers--everything
well sir, you have made me an offer I cannot refuse. It looks like I may be buying both your system and the one from this other guy, assuming he gets back to me and doesnt dish it off to someone else. I want parts from both. I'll then resell 1 of the systems. If you PM me your paypal information I will send you payment as soon as I get home (about 2 hours from now) along with my shipping address. thank you!
#67
Want a title? Post!
Join Date: Feb 2010
Location: Nottawa,MI
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC_Z
Engine: 305cid
Re: lots of tpi stuff--harnesses--computers--everything
I am interested in a couple of the intake manifolds you have in your pics. if you could send me some pics of them it would be greatly appreciated. My e-mail is todd_e_williams_h_p@live.com . Thankyou Forgot to add my zip and ask for prices. Zip is 49075 thankyou
Last edited by Priest_Todd; 05-27-2010 at 08:49 PM.
#68
Member
Join Date: Mar 2008
Location: Westminster, Maryland
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 383ci SBC
Transmission: 700r4
Re: lots of tpi stuff--harnesses--computers--everything
Would you happen to have a: engine and accessory harness from an 87 iroc, '165 ecu to match, and a 700r4 shifter cable?
all shipped to 21157 Thanks!
all shipped to 21157 Thanks!
#69
Member
iTrader: (4)
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z, 95 Z-28
Engine: 357, 350 LT1
Transmission: Built 700-R4, 6-Speed
Axle/Gears: 2.73 Peg Leg, 3.42 Posi
Re: lots of tpi stuff--harnesses--computers--everything
You have a complete sending unit for a 91 TPI
#70
Junior Member
Join Date: Dec 2009
Location: michigan
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 iroc-z
Engine: 350 5.7
Re: lots of tpi stuff--harnesses--computers--everything
i need harness and possibly comp.
heres my problem
ive got an 88 iroc with an engine out of a 91.
its a 350 tpi.
but alot of the wires do not match.
do you have anything that will work for me?
heres my problem
ive got an 88 iroc with an engine out of a 91.
its a 350 tpi.
but alot of the wires do not match.
do you have anything that will work for me?
#71
Junior Member
Join Date: Oct 2009
Location: los angeles, ca
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 CAMARO RS
Engine: 5.7 TPI
Transmission: 700R
Axle/Gears: ???
Re: lots of tpi stuff--harnesses--computers--everything
do you have the wire harness for a 88 tpi ? mine is a 5.7 if that matters, would like to c one with no cut wires
#72
Junior Member
Join Date: Oct 2008
Location: Port Hardy B.C.
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 iroc-z28
Engine: 305 tbi
Transmission: new 700r4
Axle/Gears: um 2.77 i think
Re: lots of tpi stuff--harnesses--computers--everything
i need a tpi harness and computer for an 88 iroc 305 w/od V0N 2P0 B.C.
#73
Re: lots of tpi stuff--harnesses--computers--everything
looking for a throttle cable bracket, the tpi badge on top of throttle body, dist cover, maf with ducts-would prefer the long, one piece rubber one.
#74
Senior Member
Thread Starter
iTrader: (103)
Join Date: Apr 2005
Location: townsend, mass.
Posts: 576
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: lots of tpi stuff--harnesses--computers--everything
i have the tpi plate for top of throttle body--i have the dist cover and the maf with straight duct. whats your zip? i'll get pics tomorrow
#75
Member
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: lots of tpi stuff--harnesses--computers--everything
do you have a rear end with 3.42 gears and disc brakes?
#76
Junior Member
Join Date: Sep 2008
Location: MV, OH
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROCZ
Engine: 305 TPI
Transmission: 700R4 shift kit, corvette servo...
Axle/Gears: 26 spline 4.10 mini spool
Re: lots of tpi stuff--harnesses--computers--everything
87 MAF 43011
#77
Junior Member
Join Date: May 2002
Location: LONG ISLAND NY
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 CONV
Engine: 468 BBC/500+HP
Transmission: TURBO 400
Axle/Gears: 9"FORD W/373 POSI
Re: lots of tpi stuff--harnesses--computers--everything
do you have a good mass airflow sensor for 89 5.7 ta thanks john fajdad@aol.com
#78
Senior Member
Thread Starter
iTrader: (103)
Join Date: Apr 2005
Location: townsend, mass.
Posts: 576
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: lots of tpi stuff--harnesses--computers--everything
do you have a good mass airflow sensor for 89 5.7 ta thanks john fajdad@aol.com
#79
Junior Member
Join Date: May 2002
Location: LONG ISLAND NY
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 CONV
Engine: 468 BBC/500+HP
Transmission: TURBO 400
Axle/Gears: 9"FORD W/373 POSI
Re: lots of tpi stuff--harnesses--computers--everything
do you have paypal if no email your adress and i will send you a moneyorder. ill take it fajdad@aol.com
Last edited by fajdad; 06-09-2010 at 04:47 AM.
#80
Senior Member
Thread Starter
iTrader: (103)
Join Date: Apr 2005
Location: townsend, mass.
Posts: 576
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: lots of tpi stuff--harnesses--computers--everything
do you have paypal if no email your adress and i will send you a moneyorder. ill take it fajdad@aol.com
is my paypal
#81
Supreme Member
iTrader: (4)
Join Date: Mar 2009
Location: Pepperell, MA
Posts: 3,079
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1987 Trans Am
Engine: LQ9/L92
Transmission: 4L60E
Re: lots of tpi stuff--harnesses--computers--everything
may be in the market for a fuel pump sending unit. and local, so no shipping. price? (pump optional). thanks!
#83
Supreme Member
Join Date: Jan 2002
Posts: 1,122
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1984 Trans Am 15th anniversary
Engine: L69
Transmission: 700r
Axle/Gears: 3:73
Re: lots of tpi stuff--harnesses--computers--everything
Looking for a TPI ECM for 86-89 350. I think a 305 computer will work then I will just swap proms.
#85
Junior Member
Join Date: Aug 2009
Location: booneville MS
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 camaro, 91 camaro both rs's
Engine: 78 has tpi 355, 91 has stock 305
Transmission: 78 has 700r4, 91 has t5
Axle/Gears: 78-2.73,91-3.08
Re: lots of tpi stuff--harnesses--computers--everything
do u have another 7165 ecm for sale without the prom? how much shipped to 38829?
#86
Member
Join Date: Mar 2009
Location: San Diego
Posts: 111
Likes: 0
Received 2 Likes
on
2 Posts
Car: 87 IROC
Engine: 305 TPI
Transmission: 700R4
Re: lots of tpi stuff--harnesses--computers--everything
I might take a plenum and set of runners for my 87 if you have a set. maybe the manifold also if the price is right
Pricing shipped to 92029?
Thanks,
Mike
Pricing shipped to 92029?
Thanks,
Mike
#91
Junior Member
iTrader: (2)
Join Date: Mar 2007
Location: Phoenix, AZ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: '57 Chevy 3200 pickup big window
Engine: L98 350...zz4 longblock
Transmission: corvette 4+3
Axle/Gears: 3.38:1
Re: lots of tpi stuff--harnesses--computers--everything
looking for a torque converter cover for a 92 700R4 firebird.
Do you have one? with bolts as well.
Do you have one? with bolts as well.
#92
Member
iTrader: (2)
Join Date: Feb 2008
Location: San Antonio, Texas
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 5.0 TPI
Transmission: Auto
Re: lots of tpi stuff--harnesses--computers--everything
I need a mass air flow sensor for a 1987 Trans Am GTA.
Have one for sale ??
Email me and let me know.
Thanks
Have one for sale ??
Email me and let me know.
Thanks
#93
Member
Join Date: May 2010
Location: Boulder Colorado
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 5.7 TPI w/ Bosch III's
Transmission: T56
Axle/Gears: 3.27 Borg Warner 9 bolt
Re: lots of tpi stuff--harnesses--computers--everything
Hi, I am looking for a 7165 ecm, do you have one still?
Thanks Vince
Thanks Vince
#94
Re: lots of tpi stuff--harnesses--computers--everything
You don't have an 85 PROM do ya'? FTM or HLL broadcast code. Code is on a sticker covering the UV erase segment right on the RPOM
#95
Junior Member
iTrader: (15)
Join Date: Jun 2010
Location: Shreveport, La
Posts: 44
Likes: 0
Received 5 Likes
on
4 Posts
Car: 1987 Iroc Z
Engine: 355 TPI Fully Built
Transmission: Borg Warner WC 5-Speed
Axle/Gears: Stock Posi Rearend
Re: lots of tpi stuff--harnesses--computers--everything
do you have a mass air flow sensor for an 87 iroc 350?
#97
Supreme Member
iTrader: (1)
Join Date: Mar 2007
Location: Arlington, Tx
Posts: 3,525
Likes: 0
Received 6 Likes
on
5 Posts
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: lots of tpi stuff--harnesses--computers--everything
You happen to have a t-5 bellhousing?
#98
Junior Member
iTrader: (1)
Join Date: Jan 2008
Location: Weaver Alabama
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Formula
Engine: 5.7 TPI
Transmission: Auto
Re: lots of tpi stuff--harnesses--computers--everything
woundering if you had an aluminum distributor cover and set of screws? shipped to 36277
#100
Supreme Member
iTrader: (5)
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,827
Received 64 Likes
on
57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: lots of tpi stuff--harnesses--computers--everything
Are the EGR valves on the 350 the same as the 305