1991 tpi setup and whole exhaust system for sell
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Severn, MD
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am GTA
Engine: 357sbc
Transmission: TH350
Axle/Gears: 2.73 stock rear
1991 tpi setup and whole exhaust system for sell
I have a tpi setup im taking off my car that i dont need cause im going to carb.
I have slp runners ported , edelbrock high flow base intake ported and with a egr block off plate, stock plenum ported to match the slp runner and stock trottlebody. I have stock fuel rail with 24lbs injectors and bbk FPR with a fuel gauge on the rail to show psi. Msd distributor for the tpi unit also the ram air box with kn airfilter. have slp bolts and arp bolts that goes with it. Plus the 350 heads that been ported to much intake and work done to them. the computer for the tpi unit that has been chipped.
$1000 obo. plus half of shipping
i have SLP 1 3/4" shorty headers and y pipe that have a flange at the cats so a cut out can be made to fit, the cat is a magnaflow 3"inlet/outlet stainless universal cat and the muffles are hookerAero Chamber Mufflers. 3" to 2.5" after mufflers. all the pipes have been welded ready to be put on the car cause they was took off my 1991. $550 obo local pick up for this.
will have pictures of them this weekend if it doesnt rain.
I have slp runners ported , edelbrock high flow base intake ported and with a egr block off plate, stock plenum ported to match the slp runner and stock trottlebody. I have stock fuel rail with 24lbs injectors and bbk FPR with a fuel gauge on the rail to show psi. Msd distributor for the tpi unit also the ram air box with kn airfilter. have slp bolts and arp bolts that goes with it. Plus the 350 heads that been ported to much intake and work done to them. the computer for the tpi unit that has been chipped.
$1000 obo. plus half of shipping
i have SLP 1 3/4" shorty headers and y pipe that have a flange at the cats so a cut out can be made to fit, the cat is a magnaflow 3"inlet/outlet stainless universal cat and the muffles are hookerAero Chamber Mufflers. 3" to 2.5" after mufflers. all the pipes have been welded ready to be put on the car cause they was took off my 1991. $550 obo local pick up for this.
will have pictures of them this weekend if it doesnt rain.
Last edited by 1991TransAm; 06-13-2010 at 05:37 PM.
#5
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Severn, MD
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am GTA
Engine: 357sbc
Transmission: TH350
Axle/Gears: 2.73 stock rear
Re: 1991 tpi setup and whole exhaust system for sell
I have a tpi setup im taking off my car that i dont need cause im going to carb.
I have slp runners ported , edelbrock high flow base intake ported and with a egr block off plate, stock plenum ported to match the slp runner and stock trottlebody. I have stock fuel rail with 24lbs injectors and bbk FPR with a fuel gauge on the rail to show psi. Msd distributor for the tpi unit also the ram air box with kn airfilter. have slp bolts and arp bolts that goes with it. Plus the 350 heads that been ported to much intake and work done to them. the computer for the tpi unit that has been chipped.
$1100 obo. plus shipping
i have SLP 1 3/4" shorty headers and y pipe that have a flange at the cats so a cut out can be made to fit, the cat is a magnaflow 3"inlet/outlet stainless universal cat and the muffles are hookerAero Chamber Mufflers. 3" to 2.5" after mufflers. all the pipes have been welded ready to be put on the car cause they was took off my 1991. $550 obo local pick up for this.
will have pictures of them this weekend if it doesnt rain.
I have slp runners ported , edelbrock high flow base intake ported and with a egr block off plate, stock plenum ported to match the slp runner and stock trottlebody. I have stock fuel rail with 24lbs injectors and bbk FPR with a fuel gauge on the rail to show psi. Msd distributor for the tpi unit also the ram air box with kn airfilter. have slp bolts and arp bolts that goes with it. Plus the 350 heads that been ported to much intake and work done to them. the computer for the tpi unit that has been chipped.
$1100 obo. plus shipping
i have SLP 1 3/4" shorty headers and y pipe that have a flange at the cats so a cut out can be made to fit, the cat is a magnaflow 3"inlet/outlet stainless universal cat and the muffles are hookerAero Chamber Mufflers. 3" to 2.5" after mufflers. all the pipes have been welded ready to be put on the car cause they was took off my 1991. $550 obo local pick up for this.
will have pictures of them this weekend if it doesnt rain.
Last edited by 1991TransAm; 06-12-2010 at 03:10 PM.
#6
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Severn, MD
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am GTA
Engine: 357sbc
Transmission: TH350
Axle/Gears: 2.73 stock rear
Re: 1991 tpi setup and whole exhaust system for sell
http://i14.photobucket.com/albums/a3.../randon020.jpg
http://i14.photobucket.com/albums/a3.../randon019.jpg
http://i14.photobucket.com/albums/a3.../randon018.jpg
http://i14.photobucket.com/albums/a3.../randon013.jpg
http://i14.photobucket.com/albums/a3.../randon017.jpg
its still on my car for it to move around but if anyone interested in it ill take it apart and get pics of all each piece that is going with it.
http://i14.photobucket.com/albums/a3.../randon019.jpg
http://i14.photobucket.com/albums/a3.../randon018.jpg
http://i14.photobucket.com/albums/a3.../randon013.jpg
http://i14.photobucket.com/albums/a3.../randon017.jpg
its still on my car for it to move around but if anyone interested in it ill take it apart and get pics of all each piece that is going with it.
Thread
Thread Starter
Forum
Replies
Last Post
Firechicken86
Engine/Drivetrain/Suspension Parts for Sale
0
08-12-2015 10:07 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM