vortec heads/ 350 block and random tpi parts
#1
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
vortec heads/ 350 block and random tpi parts
96 T/A rear sway bar, ill get a measurement, but its stock $10 plus shipping
rear disc brakes from 96 T/A= calipers w/old pads, lines & rotors, theyll work for a few more thousand miles $20 plus shipping i had them for a swap but i got a rear including LS1 brakes... SOLD!
b2L/l98 shortblock from a 90 formula has a few rusted rings so im discarding it and getting a different one has no cam lifters timing set just a block with the pistons rods and crank installed im junking it if no one wants it, it will get you a core charge come get it PLEASE im gonna have to scrap it and get 10$... SOLD! went to the Junk yard and got $50 for it
set of complete w/ rockers, vortec heads 062 i cracked the valve cover lip removing them Atilla says to fix with jb weld, i just spent a little more money and got a new set i just want to get a little money back 225$ shipped or pick up for $125 i can deliver within a reasonable distance NY NJ PA area im in zipcode 18428 mapquest it and see how close you are to me... pics are in this thread https://www.thirdgen.org/forums/engi...block-zz4.html ill throw in brand new package of JB weld, my manley race flow valves(1.94/1.5) new seals and locks/ retainers so youll just need new springs and valve guides done and everything will be new $275 shipped SOLD!!!
24# 96 LT1 injectors bought for TPI swap same deal selling for 383 but will keep if they dont sell $35 shipped
TPI throttle and TV cables w/ bracket SOLD!!!
TPI lower AC line with sensor 20$ shipped
bnip 6an x6' braided stainless fuel line 20$ shipped unless shipping is more then 10 bucks
l98 water pump 5$ plus shipping just pay me 5$ to box it and take it to the ups store(25 miles from me) and pay the shipping(its heavy), it works fine i wire brushed it and painted it black looks nice if your in a pickle and need one for now itll work
99 vortec 5.7L truck cam think its like 420 430 lift not sure but it would be a good 305 upgrade for cheap 30$ shipped
iroc air intake 35$ shipped
make an offer i only need a few little odds and ends from the junkyard to complete my project
rear disc brakes from 96 T/A= calipers w/old pads, lines & rotors, theyll work for a few more thousand miles $20 plus shipping i had them for a swap but i got a rear including LS1 brakes... SOLD!
b2L/l98 shortblock from a 90 formula has a few rusted rings so im discarding it and getting a different one has no cam lifters timing set just a block with the pistons rods and crank installed im junking it if no one wants it, it will get you a core charge come get it PLEASE im gonna have to scrap it and get 10$... SOLD! went to the Junk yard and got $50 for it
set of complete w/ rockers, vortec heads 062 i cracked the valve cover lip removing them Atilla says to fix with jb weld, i just spent a little more money and got a new set i just want to get a little money back 225$ shipped or pick up for $125 i can deliver within a reasonable distance NY NJ PA area im in zipcode 18428 mapquest it and see how close you are to me... pics are in this thread https://www.thirdgen.org/forums/engi...block-zz4.html ill throw in brand new package of JB weld, my manley race flow valves(1.94/1.5) new seals and locks/ retainers so youll just need new springs and valve guides done and everything will be new $275 shipped SOLD!!!
24# 96 LT1 injectors bought for TPI swap same deal selling for 383 but will keep if they dont sell $35 shipped
TPI throttle and TV cables w/ bracket SOLD!!!
TPI lower AC line with sensor 20$ shipped
bnip 6an x6' braided stainless fuel line 20$ shipped unless shipping is more then 10 bucks
l98 water pump 5$ plus shipping just pay me 5$ to box it and take it to the ups store(25 miles from me) and pay the shipping(its heavy), it works fine i wire brushed it and painted it black looks nice if your in a pickle and need one for now itll work
99 vortec 5.7L truck cam think its like 420 430 lift not sure but it would be a good 305 upgrade for cheap 30$ shipped
iroc air intake 35$ shipped
make an offer i only need a few little odds and ends from the junkyard to complete my project
Last edited by FlippindaBird; 02-11-2011 at 12:02 PM. Reason: added stuff/ lowered prices
#2
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#3
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#4
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#6
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
some pics of the block if you want any specific pics let me know
#7
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
added stuff at the top
Trending Topics
#8
Junior Member
Join Date: Oct 2008
Location: Port Hardy B.C.
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 iroc-z28
Engine: 305 tbi
Transmission: new 700r4
Axle/Gears: um 2.77 i think
Re: 350 block and random tpi parts
TPI throttle and TV cables $35 plus shipping would you take 25$ + shipping or 30$ with the brackit on the side of the tpi ?
#9
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
sorry dot have the bracket and i would like to get 35, im actualy getting another tpi setup so i can use these if i dont make what i want they are 45 plus shipping brand new
#10
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
TTY
#11
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#12
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#13
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
new items and a pic
#14
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#15
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
$125 for the block get it now if it sits here much longer the price goes back up or i assemble it and sell it that way i really just wanna get it out of my house, its in the laundry room and in the way
#16
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
more stuff new prices
#17
Senior Member
Join Date: Nov 2008
Location: Ft Campbell, KY
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS/Z28
Engine: 357 Edelbrock Intake & Holley Carb
Transmission: WC T-5
Axle/Gears: whatever stock is
Re: 350 block and random tpi parts
Hey I'm interested in the block, can you type the casting numbers? I can't see it that well in the picture. May be interested in the L98 block, not sure which one yet.
I might be interested in the hyd roller lifter stuff too, what hyd roller cams do you have?
I'm also interested in the L98 vette heads as well, my current stock 87+ non-vortec intake should bolt up to it...right? What are the casting numbers on those heads?? I'll definitely take them off your hands lol
Better yet I'm interested in a BUNCH of stuff you have there, perhaps we can talk more via pm, I'm getting a bit of money on the 15th to redo a motor that desperately needs some work, or get another.
I might be interested in the hyd roller lifter stuff too, what hyd roller cams do you have?
I'm also interested in the L98 vette heads as well, my current stock 87+ non-vortec intake should bolt up to it...right? What are the casting numbers on those heads?? I'll definitely take them off your hands lol
Better yet I'm interested in a BUNCH of stuff you have there, perhaps we can talk more via pm, I'm getting a bit of money on the 15th to redo a motor that desperately needs some work, or get another.
Last edited by mos68x; 08-08-2010 at 07:33 PM.
#18
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
397010
#19
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
pm returned
#20
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
still for sale need cash
#21
Supreme Member
Join Date: Jun 2002
Location: Welland, Ontario, Canada
Posts: 3,331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Monte Carlo SS...
Engine: T.P.I L98.
Transmission: TH350
Axle/Gears: 3:73 Posi
Re: 350 block and random tpi parts
Would you sell just the Bracket that mounts to the upper plenum that holds the throttle cable and TV dent cabel, it bolts on the drivers side with 3 bolts? If so shipping to Ontario Canada, postal code L3C2R8
Thanks
Thanks
#22
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
to canada... 30$ shipped sorry but last time i shipped something to canada it was horrible 20$ for 1.5 lbs
#24
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
you can def get the air intake the fuel lines however i do not have, unfortunately ive never gotten ahold of a serpentine setup im still running vbelts paypal rongsays@aol.com for the air intake ill get it out friday am as im on my way to work now
#25
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
vortec heads for $275 plus shipping added see pics in this thread https://www.thirdgen.org/forums/engi...block-zz4.html
#27
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
sounds good soon as the paypal confirms payment itll be shipped
#29
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
going to UPS tuesday am if i have the paypal ( rongsays@aol.com ) payment for the air cleaner by then i will ship it as well as anything that anyone else wants, trying to get up the rest of the money to finish my project and im real close
#30
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#31
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
tt
#33
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
yes please buy it!!!
#34
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
ttt
#35
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: vortec heads/ 350 block and random tpi parts
ttt
#36
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
lowered prices everything must be gone before i move in february
#38
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 block and random tpi parts
pm returned
#39
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: vortec heads/ 350 block and random tpi parts
ttt
#40
Senior Member
iTrader: (10)
Join Date: Aug 2008
Location: Winchester, VA
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: vortec heads/ 350 block and random tpi parts
Still need a 350 block? It's a 638 roller block
#41
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: vortec heads/ 350 block and random tpi parts
would have taken it a few months ago... wont need one till next year now, but i may just buy one thats already clearanced for a stroker crank, and put together a 383 myself, thanks anyway though
#42
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: vortec heads/ 350 block and random tpi parts
edited OP sold some, added some
#43
Senior Member
Thread Starter
iTrader: (10)
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: vortec heads/ 350 block and random tpi parts
ttt
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
12-02-2016 06:33 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM