[OH] 1.5/1.6 Ratio Roller Rockers
08-22-2010, 03:12 PM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Location: Lima, Ohio and Ft. Lauderdale, FL
Posts: 93
Likes: 0
Received 1 Like
on
1 Post
Car: 1983 Camaro Z28
Engine: 350
Transmission: 700R4
Axle/Gears: 3.42
1.5/1.6 Ratio Roller Rockers
Used 1.5/1.6 Proform aluminum roller rockers. Low miles, NOT self aligning, and poly locks included.
$95 shipped anywhere in the lower 48.
$95 shipped anywhere in the lower 48.
Last edited by Jr. Mechanic; 08-22-2010 at 03:20 PM.
08-22-2010, 03:27 PM
#3
Junior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2008
Location: Lima, Ohio and Ft. Lauderdale, FL
Posts: 93
Likes: 0
Received 1 Like
on
1 Post
Car: 1983 Camaro Z28
Engine: 350
Transmission: 700R4
Axle/Gears: 3.42
Re: 1.5/1.6 Ratio Roller Rockers
They are narrow and should work under center bolt valve covers, but only if the heads accept non self aligning rocker arms. Here's a link:
http://www.jegs.com/i/Proform/778/66...oductId=746729
http://www.jegs.com/i/Proform/778/66...oductId=746729
Thread
Thread Starter
Forum
Replies
Last Post
Damon
Tech / General Engine
8
09-26-2015 04:29 PM