[WI] super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and ministarter
11-12-2010, 08:30 AM
#1
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and ministarter
I have for sale a pair of hooker super comp headers, 1-3/4" primary and 3" collector for 82-92 camaro. They were ceramic coated but got some oil burnt on them so the ceramic coating on the collector and part of the tube is coming off. Looking for SOLD
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for SOLD
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for SOLD
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
Weiand Stealth sbc intake manifold. $75
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for SOLD
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for SOLD
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for SOLD
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
Weiand Stealth sbc intake manifold. $75
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for SOLD
Last edited by scorchmaster; 04-03-2011 at 12:40 PM.
11-12-2010, 08:17 PM
#2
Senior Member
iTrader: (4)
Join Date: Feb 2009
Location: Camdenton, Mo/ St. Joseph, Mo
Posts: 588
Received 0 Likes
on
0 Posts
Car: 97 Cummins 92 CamaroZ28, 94 GSXR750
Engine: Modded 5.9 , carbed sbc358, modded
Transmission: Nv4500, 700R4 (for now)
Axle/Gears: stock
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Any pics of the exhaust setup? Any pics of it on the car as well?
11-12-2010, 08:33 PM
#3
Member
iTrader: (1)
Join Date: Mar 2010
Location: Fayetteville Ar
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Firbird
Engine: 406
Transmission: 700r4 built
Axle/Gears: 3.42 posi 10 bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
What brand is the starter?
11-12-2010, 10:20 PM
#4
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,733
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Any pics of intake?
11-13-2010, 12:49 PM
#5
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
no pics of the exhaust setup on the car. I can grab some pics of everything tonight or tomorrow
Last edited by scorchmaster; 11-15-2010 at 08:38 AM.
11-14-2010, 11:57 PM
#7
Junior Member
iTrader: (1)
Join Date: Sep 2009
Location: NC
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS (Racecar)/1991 Z28
Engine: 355 Race Engine/Stock TPI 350
Transmission: Borg Warner T5/Borg Warner T5
Axle/Gears: 4.10/2.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
What's your price on the header's shipped to 28144? and whats going on with them is a tube broken or are they slip fit?
THanks
THanks
Trending Topics
11-15-2010, 08:07 AM
#8
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
It's a slip fit. I'll PM you a shipping quote, I gotta get someone else one as well
11-15-2010, 08:38 AM
#9
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
starter and carb are back up for sale
11-15-2010, 08:59 AM
#10
Member
iTrader: (1)
Join Date: Mar 2010
Location: Fayetteville Ar
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Firbird
Engine: 406
Transmission: 700r4 built
Axle/Gears: 3.42 posi 10 bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
So what brand is the starter?
11-15-2010, 09:02 AM
#11
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
I'll get it off the starter tonight and get a pic of it
11-15-2010, 11:20 AM
#12
Want a title? Post!
Join Date: Mar 2009
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
I have for sale a pair of hooker super comp headers, 1-3/4" primary and 3" collector for 82-92 camaro. They were ceramic coated but got some oil burnt on them so the ceramic coating on the collector and part of the tube is coming off. Looking for $200
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for $100
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for $175
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for $40
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for $100
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for $175
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for $40
dang it's as easy as dropping them off at the post office
11-15-2010, 03:28 PM
#17
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Super comps are sold
11-15-2010, 03:43 PM
#18
Junior Member
iTrader: (1)
Join Date: Sep 2009
Location: NC
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS (Racecar)/1991 Z28
Engine: 355 Race Engine/Stock TPI 350
Transmission: Borg Warner T5/Borg Warner T5
Axle/Gears: 4.10/2.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
11-16-2010, 08:46 AM
#19
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
starter pic added, still not sure what brand it is but it works great. Sounds like a jet engine when engaged
12-06-2010, 03:26 PM
#23
Member
iTrader: (1)
Join Date: May 2010
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 350
Transmission: T5
Axle/Gears: 3:73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
How much for exhaust shipped to 11010. Will it fit a 84 t/a?
12-06-2010, 03:32 PM
#24
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Long Island, NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
i guess the shipping on the duals to NY 11727 would be a little pricey huh?
12-06-2010, 04:00 PM
#25
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
My guess would be in the $30's, I can get a box and get a quote if that price is ok with you
12-07-2010, 10:15 AM
#26
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Long Island, NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
pm sent. thanks!
01-07-2011, 09:29 PM
#27
Junior Member
Join Date: Apr 2009
Location: west hartford,CT
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 trans am
Engine: Chevy 406
Transmission: 700r4, Built Th400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
dual exhaust still for sale?
04-03-2011, 12:16 PM
#29
Member
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Still have the duals for sale? pm me asap im very interested like want them yesterday 
04-03-2011, 12:39 PM
#30
Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Milwaukee, WI
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
exhaust is sold
pmed on the converter
pmed on the converter
04-06-2011, 01:52 AM
#31
Member
Join Date: Jan 2005
Location: Fort Wayne, Indiana
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 IROC
Engine: 385AFR head, Mini Ram Intake
Transmission: 6 Sp.
Axle/Gears: 3.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
DId you sell the intake yet. Shipping to 46816
04-13-2011, 10:05 PM
#33
Junior Member
Join Date: Aug 2009
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Thank you verry much scorchmaster,,,,i got the converter in the mail today.
good job packing....I will tell you that is one tiny converter next to all the 11" and 12" ones i have....
good job packing....I will tell you that is one tiny converter next to all the 11" and 12" ones i have....
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
