[MI] Parting out 83ta black/gold tan interior, perf parts

Thread Tools
 
Search this Thread
 
Old 03-09-2011, 05:56 PM
  #1  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Parting out 83ta black/gold tan interior, perf parts

Ok so I decided that I am going to be parting the car down and scrapping the shell. So pretty much anything and everything is for sale off of this thing. Some of the major parts are:

formula wheels - 16 x 8 with Trans Am center caps in good shape - $90

I am going to be parting out the rear end,
Eaton posi in good condition - $250This is the larger spline count, I think 28 splines. $522 new from jegs
Moser axles - $150 - These are 28 splines as well.
I will do $375 for both.
GM 3.73 gears - $75 SALE PENDING

Tubular lower control arms w/energy suspension bushings - $65 black

KYB struts - $45

Dart Iron Eagle Platinum heads 200cc intake, 64cc chamber, comp cams springs - SOLD

'87 355ci short block - Scat rods with arp rod bolts, comp XR276HR cam, sealed power pistons, stock crank, windage tray, arp main cap studs, fluidampr balancer, milodon windage tray, cloyes double roller timing chain, high volume oil pump. I have the documentation on this motor, was cleaned, magnafluxed, sonic tested at performance engineering in Jenison. - $650
This setup with the Stealth Ram made 407hp and 404ft-lbs

I also have the half serpentine system - make offer on parts.

Walbro 255lph intank electric pump, only a few years old still works good - $50

Coolant overflow bottle - $10

b&m trans cooler - $45

Aluminum Drums - make offer.

Summit 1.5 aluminum roller rocker arms - SOLD

Stock steel driveshaft with upgraded u-joints - make offer

Parking light housings -$10

Alternator, new a few years ago - $45

Wiper motor, intermittent and washer pump - $35

Power mirrors in good working order - $35 for both

GTA Gauge cluster - $40

Front bumper support -$25

I also have a dual gauge pod that I will sell with the pillar so you don't have to cut yours up. Make offer.

I have both wiper arms in good condition - $2 a piece

Make offers on parts you see in pics if there isn't a price.

Fenders are in pretty good shape, they will need paint. Make offer.
Bumpers are good, no cracks etc - front is sold, still have rear bumper.

Any of the interior parts are for sale, car has tan leather interior. Power locks, windows, mirrors, hatch. Let me know if you need something particular.

Interior Parts:
https://www.thirdgen.org/forums/inte...3ta-black.html

I will try to get pictures as soon as I can but the car is at my brothers house in Jackson at the moment so when I get time I will get some pictures. If you need something specific I can probably have him take pics for me. I am sure I am forgetting some things so let me know what you need and I will see what I have.

All prices are obo and do not include shipping.

I also found my old fquick and cardomain pages. You can check out pics/specifics there as well. The cardomain one has a pretty good account of the motor and stuff.
http://www.cardomain.com/ride/222722...ntiac-trans-am

http://www.fquick.com/garages/Pontia..._Am/1983/8003/



Name:  DSCN1495.jpg
Views: 24
Size:  57.6 KB

Name:  DSCN1493.jpg
Views: 28
Size:  53.8 KB

Name:  DSCN1517.jpg
Views: 15
Size:  34.3 KB

Name:  DSCN1515.jpg
Views: 15
Size:  60.8 KB

Name:  DSCN1523.jpg
Views: 23
Size:  64.7 KB



Last edited by eXesiv|83ta; 04-07-2011 at 07:41 PM.
Old 03-09-2011, 06:08 PM
  #2  
Member

iTrader: (1)
 
MassD's Avatar
 
Join Date: May 2010
Posts: 186
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 Trans Am
Engine: 350
Transmission: T5
Axle/Gears: 3:73
Re: Parting out 83ta black/gold tan interior, perf parts

Can you send me pics of the headers and the 3:73 gears, tubular lower control arms. Massdalessandro@aol.com
Old 03-09-2011, 06:49 PM
  #3  
Junior Member
 
transamman83's Avatar
 
Join Date: Aug 2010
Location: Charlotte Mi
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Car: 83 Trans am, and 91 Camaro
Engine: both have a 305.. For now
Re: Parting out 83ta black/gold tan interior, perf parts

Hello. I am interested in many parts. I am located in charlotte mi. Very close to where the car is located. Please send me a phone number so I can contact you. Thank you very much.
Old 03-09-2011, 08:32 PM
  #4  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Originally Posted by MassD
Can you send me pics of the headers and the 3:73 gears, tubular lower control arms. Massdalessandro@aol.com
I will get pics this weekend, Not sure if I'm going to have the rear end tore down yet though. I will let you know.
Old 03-09-2011, 08:39 PM
  #5  
Member
iTrader: (6)
 
hartman's Avatar
 
Join Date: Jan 2009
Location: Mount Carroll, IL
Posts: 223
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 firebird
Engine: SBC 350
Transmission: TH350
Re: Parting out 83ta black/gold tan interior, perf parts

pm'd on heads
Old 03-09-2011, 08:56 PM
  #6  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Heads are sold to hartman.
Old 03-09-2011, 10:17 PM
  #7  
Senior Member

iTrader: (3)
 
dabomb6608's Avatar
 
Join Date: Jul 2010
Location: Marion, IL
Posts: 529
Received 23 Likes on 19 Posts
Car: 86 Trans Am/85 K5 Jimmy
Engine: 406 FIRST/350 TPI
Transmission: TKO 600/700R4
Axle/Gears: 9Bolt/10Bolt front & back
Re: Parting out 83ta black/gold tan interior, perf parts

Pics of headers?
Old 03-09-2011, 10:24 PM
  #8  
Member

iTrader: (7)
 
KnightmareCS's Avatar
 
Join Date: Mar 2007
Location: NYC
Posts: 416
Likes: 0
Received 1 Like on 1 Post
Car: 82,83,99 T/As
Engine: 350,350,383
Transmission: ST-10,700r4,4l60e
Axle/Gears: P-3.23,P-3.42?,P-4.10
Re: Parting out 83ta black/gold tan interior, perf parts

PMming.

And why are you scrapping?

Last edited by KnightmareCS; 03-09-2011 at 10:55 PM.
Old 03-10-2011, 04:10 PM
  #9  
Junior Member

 
mstng5pt0klrz28's Avatar
 
Join Date: Jan 2004
Location: NH
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Car: 1985 Z28
Engine: 350
Transmission: T-5
Axle/Gears: 3.23
Re: Parting out 83ta black/gold tan interior, perf parts

pic of kyb struts? whats the mileage on them?
Old 03-10-2011, 06:22 PM
  #10  
Member
iTrader: (1)
 
89shane350's Avatar
 
Join Date: Nov 2009
Location: Hillsboro, Missouri
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Chevy Camaro IROC-Z
Engine: 350 TPI
Transmission: 700R-4
Axle/Gears: Borg-Warner rear axle 2.77
Re: Parting out 83ta black/gold tan interior, perf parts

Do you have the stock t-top headliner?
Old 03-10-2011, 06:35 PM
  #11  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Car is not ttops, I am scrapping to get the money out of the car and I will get pics of the KYBs this weekend. I am unsure of the mileage but it isn't a ton. Maybe 15000
Old 03-11-2011, 08:03 AM
  #12  
Supreme Member

iTrader: (25)
 
Twin_Turbo's Avatar
 
Join Date: Jun 2000
Location: Enschede, Netherlands
Posts: 5,357
Received 42 Likes on 33 Posts
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Parting out 83ta black/gold tan interior, perf parts

I'll take the lower control arms if you take paypal, have a US shipping addy
Old 03-11-2011, 08:44 PM
  #13  
Junior Member
iTrader: (1)
 
85t5mcss's Avatar
 
Join Date: Jul 2009
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Re: Parting out 83ta black/gold tan interior, perf parts

How about spindles shipped to 46077?
Old 03-14-2011, 12:01 PM
  #14  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Ok here is the scoop. I am trying to keep the car on wheels and tires for the moment as I have no where to put it if it is not mobile. I did get a bunch of stuff off it this past weekend, and I am going to get pictures up as soon as I get a chance. The short block is out of the car and ready to go. All you guys that are interested in the stuff that helps the car roll let me know if you are willing to wait a few weeks or not.

Last edited by eXesiv|83ta; 03-15-2011 at 07:07 PM. Reason: added pictures
Old 03-14-2011, 03:58 PM
  #15  
Junior Member
 
transamman83's Avatar
 
Join Date: Aug 2010
Location: Charlotte Mi
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Car: 83 Trans am, and 91 Camaro
Engine: both have a 305.. For now
Re: Parting out 83ta black/gold tan interior, perf parts

Great seller!!!!. I will do buisness with again. Great guy and very knowladgable. Thanks bud!
Old 03-14-2011, 04:07 PM
  #16  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

-

Last edited by eXesiv|83ta; 03-15-2011 at 08:07 PM.
Old 03-14-2011, 04:08 PM
  #17  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Originally Posted by transamman83
Great seller!!!!. I will do buisness with again. Great guy and very knowladgable. Thanks bud!

Hey nice meeting you, and come back when you get some more cash!

A good picture of the gauges/gauge pod
Attached Thumbnails Parting out 83ta black/gold tan interior, perf parts-035.jpg  

Last edited by eXesiv|83ta; 03-15-2011 at 07:11 PM.
Old 03-14-2011, 06:47 PM
  #18  
Junior Member

 
mstng5pt0klrz28's Avatar
 
Join Date: Jan 2004
Location: NH
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Car: 1985 Z28
Engine: 350
Transmission: T-5
Axle/Gears: 3.23
Re: Parting out 83ta black/gold tan interior, perf parts

Im willing to wait a bit(kyb struts) let me know when you get some pics!
Old 03-14-2011, 07:19 PM
  #19  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Originally Posted by mstng5pt0klrz28
Im willing to wait a bit(kyb struts) let me know when you get some pics!
Alright cool, I will see if I can get my bro to take some pics of the struts, if not I will be going back this weekend and I will get them.
Old 03-15-2011, 07:10 PM
  #20  
Member
iTrader: (10)
 
dabird07's Avatar
 
Join Date: Dec 2010
Location: nc
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 firebird
Engine: 305 tpi "stock"
Transmission: slipping
Axle/Gears: 3.42 posi disk brakes!
Re: Parting out 83ta black/gold tan interior, perf parts

pmed


i would love that 3.73 is it in good condition?? (pics ewhen u can)
along with the rest of the rear end but have to save some money . ..


would love the motor great deal on parts

good luck!
Old 03-15-2011, 07:44 PM
  #21  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Just included pics in the first post as well as more parts for sale with a link to the interior parts! Bump it up!

Last edited by eXesiv|83ta; 03-15-2011 at 08:06 PM.
Old 03-15-2011, 10:12 PM
  #22  
Member

 
shawnc16's Avatar
 
Join Date: Oct 2004
Location: Lapeer, MI
Posts: 491
Likes: 0
Received 1 Like on 1 Post
Car: 86 IROC, 89 GTA
Engine: 350 blocks, both of em
Transmission: 700r4s
Axle/Gears: 10 bolt and 9 bolt, 3.73, 3.23
Re: Parting out 83ta black/gold tan interior, perf parts

The real secret is that he bought a 4th gen! Very good friend of mine. Whatever you purchase from him it will be delivered. If not, I'll give you his address!
Old 03-17-2011, 05:57 PM
  #23  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Bump!

I also have the headlight assemblies with good headlight motors!
Old 03-17-2011, 09:29 PM
  #24  
Member
iTrader: (10)
 
dabird07's Avatar
 
Join Date: Dec 2010
Location: nc
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 firebird
Engine: 305 tpi "stock"
Transmission: slipping
Axle/Gears: 3.42 posi disk brakes!
Re: Parting out 83ta black/gold tan interior, perf parts

how many miles are on that motor?? iss it 166*** like it says on the gauges
cause thats a good deal man. . . . . .

*interested*
Old 03-17-2011, 09:48 PM
  #25  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

no there is around 15,000 miles on the motor
Old 03-19-2011, 07:55 PM
  #26  
Member
iTrader: (10)
 
dabird07's Avatar
 
Join Date: Dec 2010
Location: nc
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 firebird
Engine: 305 tpi "stock"
Transmission: slipping
Axle/Gears: 3.42 posi disk brakes!
Re: Parting out 83ta black/gold tan interior, perf parts

so heads are not included if buying the motor???
Old 03-20-2011, 06:53 PM
  #27  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Originally Posted by dabird07
so heads are not included if buying the motor???
correct,

they are not included since they are sold.
Old 03-22-2011, 06:08 PM
  #28  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Bump!!!
Old 03-22-2011, 09:19 PM
  #29  
Junior Member

iTrader: (1)
 
ATOMIC's Avatar
 
Join Date: Mar 2006
Location: Wilmington NC
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 gta (black/black wheels)
Engine: 350tpi
Transmission: 700r
Axle/Gears: 3.27 posi
Re: Parting out 83ta black/gold tan interior, perf parts

is the phantom trans temp a 2 1/8 or 2 5/8ths?
and was it 35 shipped?
Old 03-22-2011, 09:24 PM
  #30  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

not sure off the top of my head, whatever the most common is. Oh, I don't have the sender for it, the guy that bought my trans never gave it back. Go figure. So yeah that one will be $35 shipped. The others are plus shipping.

I'm pretty sure it is 2 and 1/16th.
Old 03-23-2011, 10:54 AM
  #31  
Junior Member

iTrader: (1)
 
ATOMIC's Avatar
 
Join Date: Mar 2006
Location: Wilmington NC
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 gta (black/black wheels)
Engine: 350tpi
Transmission: 700r
Axle/Gears: 3.27 posi
Re: Parting out 83ta black/gold tan interior, perf parts

let me know the part number on the back of the gauge.
i will be, 5851, 5857, or 5757.
the sender is $20 as a replacement, would you do $25 on the gauge?
i ask because they are $48.80 new.
Old 03-23-2011, 05:23 PM
  #32  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

5757
Old 03-25-2011, 02:21 PM
  #33  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Weekend bump!
Old 03-28-2011, 05:11 PM
  #34  
Junior Member

iTrader: (1)
 
ATOMIC's Avatar
 
Join Date: Mar 2006
Location: Wilmington NC
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 gta (black/black wheels)
Engine: 350tpi
Transmission: 700r
Axle/Gears: 3.27 posi
Re: Parting out 83ta black/gold tan interior, perf parts

trans temp gauge arrived today, except for the parts you said were missing, it looks new.
thanks.
Old 03-28-2011, 06:35 PM
  #35  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Originally Posted by ATOMIC
trans temp gauge arrived today, except for the parts you said were missing, it looks new.
thanks.

Thanks, I try to keep my stuff nice if possible!
Old 03-29-2011, 11:44 AM
  #36  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Updated some prices. If you don't think they are fair make me an offer!
Old 03-29-2011, 03:13 PM
  #37  
Member
 
Firebird Mess85's Avatar
 
Join Date: Jul 2008
Location: Buffalo, NY
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Firebird & Grand Prix GXP
Engine: LG4 305 (originally 2.8L V6)
Transmission: 700R4
Axle/Gears: 10 bolt 3:43 Open Diff.
Re: Parting out 83ta black/gold tan interior, perf parts

Are you willing to sell me one front wheel? If not, maybe a good price on them all but I only need one front. IF shipped it's to 14223. I may be able to take a ride to Michigan. How far are you from Buffalo, NY?
Old 03-29-2011, 04:22 PM
  #38  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

probably not worth it. I don't really want to sell one wheel. I'm pretty sure you will spend more money on shipping then the wheels.
Old 03-29-2011, 07:07 PM
  #39  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Here are the mirrors, they need to be painted and they are just dirty.
Name:  DSCN1536.jpg
Views: 17
Size:  42.5 KB

Name:  DSCN1535.jpg
Views: 10
Size:  63.8 KB


And here are the wheels, the other two look just like this. I just can't get them down at the moment. Also the center caps.

Name:  DSCN1532.jpg
Views: 14
Size:  75.6 KB

Name:  DSCN1531.jpg
Views: 26
Size:  72.2 KB

Name:  DSCN1533.jpg
Views: 17
Size:  25.9 KB
Old 03-30-2011, 01:42 AM
  #40  
Junior Member

 
80s Poncho's Avatar
 
Join Date: Sep 2009
Location: Iowa
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Pontiac Formula /1985 Trans Am
Engine: TPI 350 / TPI 305
Transmission: 5 Speed / 4 Speed Auto
Axle/Gears: 323
Re: Parting out 83ta black/gold tan interior, perf parts

How much just for the center caps?
Old 03-30-2011, 01:45 AM
  #41  
Junior Member

 
80s Poncho's Avatar
 
Join Date: Sep 2009
Location: Iowa
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Pontiac Formula /1985 Trans Am
Engine: TPI 350 / TPI 305
Transmission: 5 Speed / 4 Speed Auto
Axle/Gears: 323
Re: Parting out 83ta black/gold tan interior, perf parts

How much for the rear bumper and the center caps?
Old 03-30-2011, 07:24 AM
  #42  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Lets say $45 for the center caps and I don't think I want to ship the rear bumper.
Old 03-30-2011, 02:31 PM
  #43  
Member
 
Firebird Mess85's Avatar
 
Join Date: Jul 2008
Location: Buffalo, NY
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Firebird & Grand Prix GXP
Engine: LG4 305 (originally 2.8L V6)
Transmission: 700R4
Axle/Gears: 10 bolt 3:43 Open Diff.
Re: Parting out 83ta black/gold tan interior, perf parts

Originally Posted by eXesiv|83ta
probably not worth it. I don't really want to sell one wheel. I'm pretty sure you will spend more money on shipping then the wheels.
How much for the front two wheels then if I come pick them up?
Old 04-05-2011, 07:02 PM
  #44  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

Bump! Prices updated.
Old 04-08-2011, 09:34 AM
  #45  
Senior Member

iTrader: (8)
 
88FormulaKiller's Avatar
 
Join Date: Mar 2008
Location: NH
Posts: 655
Likes: 0
Received 2 Likes on 1 Post
Car: 1967 Firebird P.T.
Engine: LS3 4" Strkr 422ci
Transmission: MN12 6 speed
Axle/Gears: 3.73 8.5" 10 Bolt Eaton
Re: Parting out 83ta black/gold tan interior, perf parts

im interested in the KYB's if they are available, just curious if your selling just the fronts? shipped to 01462? thanks
Old 04-12-2011, 10:55 PM
  #46  
Junior Member
iTrader: (1)
 
wakeboardr42393's Avatar
 
Join Date: Apr 2010
Location: Garfield Heights, Ohio
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 BMW 325is
Engine: M20B25
Transmission: Getrag 260
Axle/Gears: 3.73 LSD
Re: Parting out 83ta black/gold tan interior, perf parts

is the weatherstripping still in decent condition? i need the drivers side door and the part that goes on the front of the side window (connects to a pillar) for sure, and possibly the passenger door. if any of these are good im interested. thanks. oh, and are the seat upholstry peices (the parts that zip off) still in good condition? thanks.
Old 04-13-2011, 06:38 AM
  #47  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

The seats are sold and the weather stripping is not in good condition. Basically like every other old thirdgen.
Old 04-13-2011, 07:32 AM
  #48  
Senior Member

iTrader: (8)
 
88FormulaKiller's Avatar
 
Join Date: Mar 2008
Location: NH
Posts: 655
Likes: 0
Received 2 Likes on 1 Post
Car: 1967 Firebird P.T.
Engine: LS3 4" Strkr 422ci
Transmission: MN12 6 speed
Axle/Gears: 3.73 8.5" 10 Bolt Eaton
Re: Parting out 83ta black/gold tan interior, perf parts

Originally Posted by 88FormulaKiller
im interested in the KYB's if they are available, just curious if your selling just the fronts? shipped to 01462? thanks
still awaiting an answer....interested in buying asap.

Last edited by 88FormulaKiller; 04-13-2011 at 07:36 AM.
Old 04-13-2011, 02:25 PM
  #49  
TGO Supporter
Thread Starter
iTrader: (4)
 
eXesiv|83ta's Avatar
 
Join Date: Oct 2004
Location: Rockford, MI
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Pontiac Trans AM
Engine: 355 chevy
Transmission: 700R4 Built
Axle/Gears: Built 10 bolt 3.73 gears
Re: Parting out 83ta black/gold tan interior, perf parts

still getting around to it.
Old 04-13-2011, 11:36 PM
  #50  
Member
iTrader: (12)
 
83C_CamAroZ28's Avatar
 
Join Date: Sep 2009
Location: Norwalk, CA
Posts: 452
Likes: 0
Received 0 Likes on 0 Posts
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Re: Parting out 83ta black/gold tan interior, perf parts

do u have pics of lower control arms if u still have them?...


Quick Reply: [MI] Parting out 83ta black/gold tan interior, perf parts



All times are GMT -5. The time now is 09:59 PM.