fireeater

iTrader: (1)

Terre Haute Indiana
email tex@fire-eater.net
Pick up only for block and heads want you to inspect b4 you buy.

Make me an offer come and get it.

I had 700 dollars worth of machine work done to this block and heads a couple of years ago and I am never going to build this engine. I had it magnafluxed. had it bored .030 over, line bore, decked, new cam bearings installed. hd the heads modified for 2.2 and 1.6 valves, and valve seats machined for comp cams valve springs part no 986-16 recommended for the cam(08-423-8) I never started the pocket porting though. I dont kn ow how much was taken off the head and deck, but my machinist said would be 10:1 with flat top pistons.

I coated the block and heads with lucas to protect from rust but there is some light surface rust. I think it will clean up fine.

Other parts I have flat top

hypereutectic pistons
Forged rods
Cam
Springs
Stainless valves
Polished 52mm throttle body
original throttle body
chrome high cap oil pan
melling high vol pump
aluminum ball milled valve covers
new unpainted steel valve covers
etc

Rabble

Will you seperate the block and heads? I only need the heads. And how much are you looking for?
The pistons, are they standard bore?

I'm located over in Portage

fireeater

iTrader: (1)

I will separate, pistons are .030 over like the block. youknow the heads are modified right? do you need the valves or springs that fit it?

Rabble

All I will need is the valves. I need standard bore pistons, so nevermind on them.

fireeater

iTrader: (1)

First, I need to correct the typo intake valves are enlarged to 2.02 not 2.2 so I understand if you are no longer interested. would take 180 for the heads. 80 for the new stainless valves. I dont care if you buy my springs as log as you understand that these heads are modified for these springs and the stockers may not work would take 80 for the springs and retainers and other spring hardware if i can find other hardware caps and such. I could ship the heads if someone pays actual cost and they are heavy.

Rabble

This is the cam I have, http://www.compcams.com/Company/CC/c...x?csid=87&sb=2 and I have the matching springs and everything for them. Will these work?

fireeater

iTrader: (1)

The second set of springs listed are the ones i have so you should be good to go.

Johnny Blaze

iTrader: (15)

Interested in the block, pistons, rods, heads and valves.

What brand and part number for the pistons and rods?

Price for all, I can meet. I'm about 3 hours away in the same state.

fireeater

iTrader: (1)

I will try to get that info for you but will probably be thursday night. I work 12 hr nights and go to class during the day. The pistons came in a plain white box and the rods came bundled in plain packaging. I will look for markings though. I I also have piston rings and bearings I think are sealed power. will let you know if you have a little patience. Thanks in advance

Johnny Blaze

iTrader: (15)

I'm in no hurry, but definatly in the market for said items. Let me know what you find.

Are the pisons installed on the rods already? Did the machine shop bore the block to match the pistons?

Do you have a crank?

Johnny Blaze

iTrader: (15)

E-mail sent.

Johnny Blaze

iTrader: (15)

Any info?

fireeater

iTrader: (1)

Rabble. Still interested in these heads and valves? I never heard back from you.

fireeater

iTrader: (1)

blocl is bored .030 over pistons are flat top .030 overPistons are sealed power guess I lied about the box. no brand on the rods. markings are 2 411 very light surface rust on the rods from storage bearing surfaces still look good 180 for heads 150 for block 80 for valves 75 for pistons 90 for the rods. 20 for sealed power rings. 550 for all

fireeater

iTrader: (1)

Sorry it took so long. been super busy. new job interviews. class overtime at work. liquidating my rifle collection etc. was ball milled valve covers in the plain white box.

88FormulaF_Bomb

iTrader: (1)

liquidating rifle collection??? pm me


Posted from Thirdgen.org App for Android

fireeater

iTrader: (1)

Sorry, dont know how to pm. is my e-mail visible to you? we can exchange numbers.

Johnny Blaze

iTrader: (15)

I'm definatly interested in the block, pistons, rods, rings and bearings and ghe heads with valves.

Im about 3 hours away, it would be this coming weekend before I can make the trip.

88FormulaF_Bomb

iTrader: (1)

emailed you my number


Posted from Thirdgen.org App for Android

fireeater

iTrader: (1)

I will be here. If you are very serious, I can hold them for you. also have most of a felpro gasket set and lotss of other stuff if ur interested.

Johnny Blaze

iTrader: (15)

I'm serious, I can come up Sunday, if you were willing to hold, I could paypal you a deposit tommorrow if neeeded.

May be interested in other stuff too, I'm pretty much starting all over after removing a big block from my camaro, and going back to tpi.

fireeater

iTrader: (1)

No deposit. your word is ok. if my email is visible to you. shoot me one directly with your number and then I'll text u mine.

Johnny Blaze

iTrader: (15)

Thanks for the parts today!
Great seller.

fireeater

iTrader: (1)

Johny Blaze is a stand up guy. Thanks again.