When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TPI intake manifold, pleum and runners, new IAC, MAT, TB has airfoil
Up fort sale is the intake manifold, runers and plenum from my 88 GTA. I have moved to an LS! so i no longer need this stuff.
The manifold was sprayed black because it was dirty and due to a frozen bolt I couildn't remove it to properly clean it. I have since removed the engine and was able to remove the bolt, but did not strip the paint off the manifold. It has EGR. Also are the runners which have a couple minor dents and could use a good powder coating in black. The plenum is also in good condition, but could also use a powdercoating. They all retain their shine, just have some minor scratches here and there.
It has a new AC delco IAC and MAT sensor. The air foil is installed int the throttle body. With the throttle body, one of the screw holes is a problem, but does not affect sealing. The screw was frozen in there and the head snapped off while I was servicing it. The plenum was recently thouroughly cleaned by me and was used for only 5 months after the thorough cleaning.
I would like 250 for everything.
The only hardware I will provide is some of the intake manifold bolts. Do yourself a favor and get new stainless steel hardware. DO not use HAWKS as a source for the bolts. I did that and it gave me all sorts of problems. Make sure it is not torx or allen, just a regular hex bolt
04-13-2015, 10:37 PM
