[CT] TPI parts and more
#1
TPI parts and more
Hey guys, I've spent the last year trying to get the 305TPI running as best as I could in my car. after spending all the money and still not being happy with the car I decided to finally pull the engine and put in a carbed 383 which is what I've wanted since I bought the car.
The majority of these parts have zero miles on them, I haven't driven the car since last june. I've only started and idled the car with them about 25 times max. I have receipts for the majority of this stuff to prove how new they are. I have all the bolts for pretty much every part, I can also remove the paint if you prefer. I will split any of the parts up except for the injectors.
I'm also open to trades if you have anything to help my carb'd 383 swap
-brand new coil inside (zero miles)<br/>-dizzy cap is a few years old (about 4000 miles)
-Egr was put on in 2014 (about 4000 miles)<br/>-New egr temp switch put on in 2015 (about 60 miles max)
-fuel rail has all brand new o rings (zero miles)<br/>-FPR has a rebuild kit in it (zero miles)
-southbay Bosch D3 injectors brand new (zero miles)
-TPI intake manifold, obviously has 30 years of use, I'll clean it at work in the parts washer before shipping
-Throttle body and plenum are in good working order<br/>-TPS and IAC are from autozone and were put on in 2013-2014, they work fine (about 4000 miles)
The majority of these parts have zero miles on them, I haven't driven the car since last june. I've only started and idled the car with them about 25 times max. I have receipts for the majority of this stuff to prove how new they are. I have all the bolts for pretty much every part, I can also remove the paint if you prefer. I will split any of the parts up except for the injectors.
I'm also open to trades if you have anything to help my carb'd 383 swap
-brand new coil inside (zero miles)<br/>-dizzy cap is a few years old (about 4000 miles)
-Egr was put on in 2014 (about 4000 miles)<br/>-New egr temp switch put on in 2015 (about 60 miles max)
-fuel rail has all brand new o rings (zero miles)<br/>-FPR has a rebuild kit in it (zero miles)
-southbay Bosch D3 injectors brand new (zero miles)
-TPI intake manifold, obviously has 30 years of use, I'll clean it at work in the parts washer before shipping
-Throttle body and plenum are in good working order<br/>-TPS and IAC are from autozone and were put on in 2013-2014, they work fine (about 4000 miles)
Last edited by TylerSteez; 06-03-2017 at 06:01 PM. Reason: adding info about trades and what comes with the parts.
#2
Re: TPI parts and more
-Maf is a new re manufactured one from carquest, may have drove the car around the block with it on once.
runners with 9th injector provision, I have a block off plate for the 9th injector as well that ill throw in with them, I can take the paint off if you prefer
#10
Supreme Member
Join Date: May 2015
Location: Florida
Posts: 1,712
Received 241 Likes
on
186 Posts
Car: 1991 Z28
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3:42 Auburn
Re: TPI parts and more
How much for the plenum and TB. and also would you separate? I am really just looking for a plenum but if the price is right I would take both.
#12
Member
Join Date: May 2015
Location: Washington State
Posts: 494
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1986 IROC Z
Engine: 305 TPI
Transmission: Auto
Re: TPI parts and more
Would you happen to have the clip or clamp or whatever it is that attaches the MAF to the "Y" shaped air cleaner assembly?
#16
Senior Member
Re: TPI parts and more
How much for the base? 46268