[AZ] Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
#1
Member
Thread Starter
Join Date: Jul 1999
Location: United States of America
Posts: 130
Likes: 0
Received 1 Like
on
1 Post
Car: Firebird
Engine: LG4
Transmission: Auto
Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
For sale--some used C4HD 13" brake conversion parts:
*Pair of 1LE hubs originally purchased from Ed Miller (aka flynbye)
*Pair of adapter brackets originally purchased from Ed Miller (aka flynbye)
*Pair of caliper carriers
*LH & RH calipers
*Mounting bolts
You get everything pictured. Requires the basic spindle mods, plus you will need to supply your own:
stock brake hoses, banjo bolts, caliper pin and c-clip (ACDELCO 18K281X), pads and rotors. Probably could uses some new bearings too (set 3 and set 6).
$200 plus $20 shipping. I accept Paypal. Thanks.
*Pair of 1LE hubs originally purchased from Ed Miller (aka flynbye)
*Pair of adapter brackets originally purchased from Ed Miller (aka flynbye)
*Pair of caliper carriers
*LH & RH calipers
*Mounting bolts
You get everything pictured. Requires the basic spindle mods, plus you will need to supply your own:
stock brake hoses, banjo bolts, caliper pin and c-clip (ACDELCO 18K281X), pads and rotors. Probably could uses some new bearings too (set 3 and set 6).
$200 plus $20 shipping. I accept Paypal. Thanks.
#2
Supreme Member
iTrader: (2)
Join Date: Nov 1999
Location: Monroe,NC
Posts: 1,779
Likes: 0
Received 20 Likes
on
15 Posts
Car: 90 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 9 bolt/3.27
Re: Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
What shape/condition are the calipers in: as in do they need a rebuild?
#3
Member
Thread Starter
Join Date: Jul 1999
Location: United States of America
Posts: 130
Likes: 0
Received 1 Like
on
1 Post
Car: Firebird
Engine: LG4
Transmission: Auto
Re: Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
The calipers were rebuilt Raybestos units I got in 2012. They worked fine before the car was put up on blocks in the garage about a year ago. I just removed from the vehicle last week, so they were not sitting outside in the elements. I have added a few more pictures. I would think they would work fine without a rebuild.
Thread
Thread Starter
Forum
Replies
Last Post
Rellim88
Engine/Drivetrain/Suspension Parts for Sale
28
11-10-2018 03:13 PM
TVP122
Engine/Drivetrain/Suspension Parts for Sale
2
04-30-2014 11:31 PM
tonythetoad
Engine/Drivetrain/Suspension Parts for Sale
9
04-30-2013 06:53 AM
FASTERTHANUMARK
Engine/Drivetrain/Suspension Parts for Sale
8
04-06-2008 07:26 AM