Tell Me What You Think Need Some Help
12-24-2002, 08:10 PM
#1
Member
Thread Starter
iTrader: (2)
Join Date: Dec 2002
Location: Lincoln, NE
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 350 TPI
Transmission: TH350
Tell Me What You Think Need Some Help
Alright i need some help building my engine. I want it to be a 355 that going to be able to handle a TNT nitrous wet kit 150-200hp kit. I want the engine to push around 350-400hp without the nitrous. This is going in an 88 GTA. Heres my thoughts so far.
AFR 190cc or 195cc heads
Holley Stealth Ram Intake
Comp. Xtreme Energy Cam 276/281 224/230 .503/.510 112LS
Comp Cam Pro Magnum 1.6 roller rockers
SLP 1 3/4" Headers
3" Cut-Out
3" Flowmaster Exhaust
52mm Holley Throttle Body
Custom Cold Air Intake
B&M 2400 Holeshot Torque Converter
3.70 gears (9 bolt)
Spohn suspension ( torque arm, LCA, LCA relocation brackets, and panhard bar)
I'd like to here your comments on this setup.
I also would like to here some suggestions on building the bottom end of the engine.
Also if 400hp is possible with this setup
AFR 190cc or 195cc heads
Holley Stealth Ram Intake
Comp. Xtreme Energy Cam 276/281 224/230 .503/.510 112LS
Comp Cam Pro Magnum 1.6 roller rockers
SLP 1 3/4" Headers
3" Cut-Out
3" Flowmaster Exhaust
52mm Holley Throttle Body
Custom Cold Air Intake
B&M 2400 Holeshot Torque Converter
3.70 gears (9 bolt)
Spohn suspension ( torque arm, LCA, LCA relocation brackets, and panhard bar)
I'd like to here your comments on this setup.
I also would like to here some suggestions on building the bottom end of the engine.
Also if 400hp is possible with this setup
