92 camaro v6 to 350 v8 swap
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2007
Location: Beer City,Wisconsin
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro,99 s10
92 camaro v6 to 350 v8 swap
Can i take the serpetine belt (all the pulleys and everything) from the 3.1L and transfer it to the 350 which currently just has a p/s belt and alternator belt and if so do underdrive pulleys really make all the difference?
Also obviously the 3.1 is F/I while the 350 is carb... i dont think that should matter but thought i'd throw it out there,just to be on the safe side.
Also obviously the 3.1 is F/I while the 350 is carb... i dont think that should matter but thought i'd throw it out there,just to be on the safe side.
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome to thirdgen.org.
Basically, nothing fits. You need V8 or 4.3l V6 stuff.
Basically, nothing fits. You need V8 or 4.3l V6 stuff.
Thread
Thread Starter
Forum
Replies
Last Post