TechMav

I'm in the home stretch on my engine swap, and I've run into a snag. I've got a handful of connectors that I can't identify. If anyone can shed some light into what they are, I would be most appreciative.

Drivers side front corner, near battery, 2-pin connector (Washer Motor)
A-Red, B-Blue

Near brake booster, 2-pin connector (Vehicle Speed Sensor?)
A-Yellow, B-Purple

Near brake booster, 4-pin connector (700R4 connector)
A-Purple, B-Green, C-Tan/Black (Might be Brown/Black)

Near drivers side valve cover, back of engine, 3-pin connector (Wiper motor)
A-Purple, B-Yellow, C-Black

Near drivers side valve cover, at rear of engine, 6-pin connector (Washer/Wiper Switch Assembly)
A-Yellow, B-Grey, C-Green, D-Red, E-Blue, F-Pink


Also, as I was digging through the wire harness, trying to identify everything, I found a frightening sight... bare wires on the fuel relay connector. I have standard Bosch relays and connectors, so I was planning to replace the connector and relay with one of those. If anyone could shed light on how to wire that, I'd be grateful.
A-Brown/White, B-Black/White, C-Green/White, D-Orange, E-Orange

kcallais

take some pictures and post them up, will help immensely.