no power to dash and brake lights on
#1
Junior Member
Thread Starter
Join Date: Jan 2015
Location: Burkburnett, TX
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am
Engine: 5.7ltr
Transmission: 700r4 with shiftkit
Axle/Gears: LS 4.11
no power to dash and brake lights on
Ok so I have a 1988 Trans am 5.7. I am doing a carb conversion on. I removed the TPI equipment, the ECM and the wiring from the ECM to the front of the car. I unhooked the VATs module and took out the fuse for VATS. After doing all this I have no power to the dash. My power windows work but the mirrors do not and my rear hatch motor has no power. Also the headlights do not work or go up and down. When the battery is connected the brake lights stay on. The white wire on the column connector gets pretty warm (brake lights). I took out the harness for the cruise control as well.
Any ideas?
Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
The_Phoenix
Interior Parts for Sale
12
02-04-2016 07:10 AM