adriancamaro

Hey yall, im parting out a 1985 Z28, its gray exterior with a red interior, basically, if you need anything let me know, the only thing really missing out of this car is the tranny. but i don't have the time or money to put into this car, and i figure i can part it out and use the money for my 1992 RS.

Like i said, its red interior with a grey exterior, and has T-tops, headliner is pretty much perfect (i haven't taken it out, so im not 100% sure), and all weather stripping is good. i have 3 matching rims (gold) and one that doesn't match.

Let me know if you need parts, i can see what i have.

FYI, tail lights, dash pad, and some other parts my not be for sale due to the fact i may need spares for my RS, dash is for sale, but not the top dash pad. the dash pad in my RS has a crack in it and a corner thats cracked if you want to buy that one thats fine, but the one in the Z28 is uncracked and is going in the RS when i do a heater core fix this winter.

Car is in De Pere, Wisconsin. I can ship parts.

Also due to the fact that i have school, work, and dial-up internet at home, I might be slow at responding to requests, but please bare with me and i will check as often as i can.

If you would like to email me, that would probably be better than posting here, my email is phantombandman@yahoo.com

I will also try and keep this thread updated as to what is sold.

Thank you,
adriancamaro


---email me for pics thanks.

HotRod6784

Does your car have the air dam holes on the front plastic if so how much for it and the rear plastic shipped to 63555

adriancamaro

im not sure exactly what you mean, an example pic would help. do you mean on the gfx or the grill.

adriancamaro

One other thing i forgot to mention about this car, it is stock 305 with a 4 barrel. im pretty sure the 4 barrel will work on a 350. but don't quote me on that one. i also have a complete stock 92 RS rearend (axle), with good break pads, and almost new drums. i have a catallitic converter that is good, and im pretty sure i have a radiator that will fit into an RS (i can't remember correctly if it does or not).

89Firebin

iTrader: (1)

Is the car a 5 speed?

Thanks,
Ryan

adriancamaro

No the car is not a 5 speed. It was originally an auto with a 700R4 tranny, but now does not have a transmission in it.

adriancamaro

Just to let you know, the hood louvers are sold. spoiler is gone.

adriancamaro

bump

CamarosRUS

Have this cover by chance?

adriancamaro

either im blind or its not marked in the pic, if you could draw an arrow or circle the cover wanted, thanks.

chevysquid

iTrader: (7)

I'm trying to find a good set of T-Top drip seals. They are the seals on the outside of the T-Top above the window. Can you help me out?

adriancamaro

Ill take a pic of the drip seals on both sides, do you have an email address i can email them to? if not i can post them here, let me know. ill take the pics and let you decide if you want them. not sure when ill get the pics, maybe this weekend sometime.

chevysquid

iTrader: (7)

that will work. E-mail is chevysquid@yahoo.com. Thanks.

CamarosRUS

It is the black plastic cover that surrounds the hood latch in the front of the car.

vette gator

What kind of shape are the front seat belts in?

leeshearer

I need the engine wire harness. please email me leeshearer@verizon.net
Thanks

HankL69

iTrader: (1)

Are the doors rust free or typical of Wis. doors.

adriancamaro

Im not sure really, if you want to come look at them you can, come on over

adriancamaro

Im pretty sure i have that, i know there is one on the car, but im not sure if its exactly the same as yours. ill look tomorrow and get back to you.

americanmuscle3

iTrader: (1)

still got headliner?

adriancamaro

Still have the headliner, its red t_tops with the big console on it.

adriancamaro

Seat belts are shot in my opinion, they are faded noticably, and they have these in them (you can see what i mean)

adriancamaro

Here is the cover i have, a little dirty but can be cleaned up.

vette gator

Weird, I have the same tear on the passenger side on mine too. What I really need, though is the plastic sleeve for the driver's side stub belt. Someone sat in my car on top of the stub and broke the plastic. If this part is in good shape, I'll take it.

adriancamaro

Here is what mine looks like, not sure if it matches yours, i know the sleeves in my 92 RS are different than these, but these are the ones i have, they look great too.

adriancamaro

Wildebird, here are the pics of the antenna. pm sent

Wildebird

iTrader: (2)

Sent you a PM.
Clint

adriancamaro

Here's the requested Catalytic converter pics

rick121

iTrader: (1)

Did the Cat converter sell already? If no what are the inlet/outlet measurements. also, which grille do you have?

adriancamaro

The measurements are in the pic (should be the same on both sides), as for the grille, i have the one with the two openings for the fog lights, i think thats the Z28 grille (not sure) but it says "Camaro" in the middle.

adriancamaro

Update, here are the parts that are sold right now:

-hood louvers
-spoiler
-power antenna
-front bumper cover
-rear bumper cover
-all gfx

Still have everything else, let me know what you guys need

rick121

iTrader: (1)

if the grille isn't all scratched up then I'm ready to pay. just need your paypal info

adriancamaro

Here is a pic of the grille, it has holes in the front were the license plate bracket was bolted to it, not sure if that makes a difference or not, but here is the pic.

adriancamaro

Grille sold to rick121, also sent pm to rick121

z 28 jari

iTrader: (1)

Pm sent

adriancamaro

Here are the requested headliner pics, pm sent.

the green circles are where the headliner board is ripped, the ones by the front console are not all the way through but it is weaker there, however the one by the seatbelt slot is all the way through and the piece is hanging on by the fabric. Not sure what your plans are with this, if you want to recover it or not, but im sure the pieces can be fixed. No pieces are missing, they are just torn.

adriancamaro

One more

HotRod6784

on the bottom of the nose cone it should have air holes i am in need of the entire nose cone if its for the right price

adriancamaro

Nose Cone? Do you mean the bumper cover?

HotRod6784

yes that would be it

concrete66

iTrader: (1)

Can I get some info and pics of the hood.

Rust/dent/ding free?

concrete_66@yahoo.com

Thanks,

Steve

adriancamaro

Sorry im using it for my car, rearended someone a couple days ago and need it for my RS

From what i remember (im at work now not home) the hood isnt bad, but there is rust on the inside where it hangs over the headlights, so if you want to use it, that part would have to be fixed, i can get some pics to you later, shoot me an email so i remember, i check that more than this site. phantombandman@yahoo.com

Thanks,
adriancamaro

adriancamaro

Here are the requested bumper cover and gfx pics (4 total)

adriancamaro

4th one

HotRod6784

have u sold the bumper cover yet and the rear plastic i am still intersteaded and the front nose cone too 63555

LambOfGod

I'm looking for a passenger side fender, got pics?

woodyredhead

looking for radio have one ???? i have a 83 z28

gilley's86

Does it have the 3 spoke steering wheel and horn button? Any pictures available? Thanks man.

Gilley

1987earthquake

iTrader: (5)

How much for the two front spindles with rotors shipped to 39401. Rotors can be shot. I just need some to cut up so I don't have to cut my stock ones up that have good rotors on them.. and the passenger side window sweep..

adriancamaro

I just came into possession of a berlinetta front bumper cover (the one without the gfx) and a rear bumper cover. not sure what you mean by nose cone. shoot me a list of what you need, and i'll let you know what i have.

Have a pass. side fender with a crease in it, right above the gfx, not sure of the condition you want it in.

Sorry, no radio at this time

Not sure, ill check

Not sure if the spindles are shot or if they are still good, rotors should be good, i'll take a look at them and let you know.



Note to all: It might take me a while to get back to you with the info you need but I'll do my best. Thanks