Rear Window Louvers for SALE ----- $250 obo
#1
Member
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: Florida
Posts: 148
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1984 F41 Camaro
Engine: LC1 V6 2.8L
Transmission: 4 Speed Auto
Axle/Gears: 3.23
Rear Window Louvers for SALE ----- $250 obo
I have 3pc abs plastic louvers for sale, also included is aluminum mounting hardware(2 hooks for top and 4 plates for glass).
These louvers are made by Kobel and are 3pc plastic, they are put together with rivets and washers to assure they don't come apart or break. I have no idea how old these louvers are, but i have owned them for about 7 months now, the hardware is handmade and isn't perfect, but its better than most of the louvers you see with no hardware or cheap plastic hardware.
***** Please note that the hardware has been painted black and fine tuned since the pictures were taken.
Please refer to pictures for conditions, however they are in near perfect condition
I am only asking $250 obo because i am on a time crunch to get my car finished, i still have wheels, tires, new hood, and body work + paint to pay for so i'm selling these to help. I do like these louvers and once my car is finished i will set out on a search for the factory aluminum louvers to be restored because i really don't want to part with them. However, keeping my car from rusting away is a tad bit more important to me.
I am located in Maryland just outside of Baltimore and am willing to meet you anywhere you choose/drop them off to you if you are close, i will be willing to ship them if we agree on a price and you pay the shipping cost
The price is $250 OBO so make an offer, the worst i can ask is for you to give me some time, they have to go so whoever offers most gets them
-------To install these on your car you must make sure your glass is spotless(clean with alcohol and very fine steel wool) then get good adhesive tape or glue for a stronger bond(get the good brands like 3m, etc.), then position the louvers and screw on with the washers and screws provided with the hardware------
These louvers are made by Kobel and are 3pc plastic, they are put together with rivets and washers to assure they don't come apart or break. I have no idea how old these louvers are, but i have owned them for about 7 months now, the hardware is handmade and isn't perfect, but its better than most of the louvers you see with no hardware or cheap plastic hardware.
***** Please note that the hardware has been painted black and fine tuned since the pictures were taken.
Please refer to pictures for conditions, however they are in near perfect condition
I am only asking $250 obo because i am on a time crunch to get my car finished, i still have wheels, tires, new hood, and body work + paint to pay for so i'm selling these to help. I do like these louvers and once my car is finished i will set out on a search for the factory aluminum louvers to be restored because i really don't want to part with them. However, keeping my car from rusting away is a tad bit more important to me.
I am located in Maryland just outside of Baltimore and am willing to meet you anywhere you choose/drop them off to you if you are close, i will be willing to ship them if we agree on a price and you pay the shipping cost
The price is $250 OBO so make an offer, the worst i can ask is for you to give me some time, they have to go so whoever offers most gets them
-------To install these on your car you must make sure your glass is spotless(clean with alcohol and very fine steel wool) then get good adhesive tape or glue for a stronger bond(get the good brands like 3m, etc.), then position the louvers and screw on with the washers and screws provided with the hardware------
#3
Junior Member
Join Date: Sep 2008
Location: Vancouver, Canada
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 1/2 Z28
Engine: modified 305
Transmission: 5 sp
Re: Rear Window Louvers for SALE ----- $250 obo
Are these still available ?
I'm in Vancouver, BC and am willing to pay for shipping. I have some made by Cragar, same company that made factory ones - plastic outer pieces, aluminum inner slats, but there are two spots that have cracked and I don't know if I can get it fixed or not, so looking for new ones ......
They look very much the same, but mount a little different, but mine don't have the support bar up the middle.
Please message me back if they are available so we could make plans.
Thanks,
Stu
I'm in Vancouver, BC and am willing to pay for shipping. I have some made by Cragar, same company that made factory ones - plastic outer pieces, aluminum inner slats, but there are two spots that have cracked and I don't know if I can get it fixed or not, so looking for new ones ......
They look very much the same, but mount a little different, but mine don't have the support bar up the middle.
Please message me back if they are available so we could make plans.
Thanks,
Stu
Trending Topics
#11
Member
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: Florida
Posts: 148
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1984 F41 Camaro
Engine: LC1 V6 2.8L
Transmission: 4 Speed Auto
Axle/Gears: 3.23
Re: Rear Window Louvers for SALE ----- $250 obo
I never found OEM Louvers, body work and paint started on my car this week so havent really had the spare cash, and the wheels i have and im almost done sanding and polishing them, they will be done by the time the body work is that way they dont get over spray on them in paint, i'll be posting pics soon on here once they are done though, shouldnt be long
#12
Member
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: Florida
Posts: 148
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1984 F41 Camaro
Engine: LC1 V6 2.8L
Transmission: 4 Speed Auto
Axle/Gears: 3.23
Re: Rear Window Louvers for SALE ----- $250 obo
Louvers have been sold, thanks for looking, and thanks for the purchase
Thread
Thread Starter
Forum
Replies
Last Post
xbazzarex
Interior Parts for Sale
20
09-11-2016 02:38 PM