NEW FMIC Intercooler Radiator done
06-23-2010, 01:00 AM
#1
Supreme Member
Thread Starter
Join Date: Aug 1999
Location: sweden
Posts: 2,441
Likes: 0
Received 1 Like
on
1 Post
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
NEW FMIC Intercooler Radiator done
One of the things I've done this year is a new IC/radiator setup
Old Procharger 3-core setup
Picture of new radiator and new Intercooler also will fit the AC condensor and a trannycooler between them
New lower radiator support
Old Procharger 3-core setup
Picture of new radiator and new Intercooler also will fit the AC condensor and a trannycooler between them
New lower radiator support
06-23-2010, 01:01 AM
#2
Supreme Member
Thread Starter
Join Date: Aug 1999
Location: sweden
Posts: 2,441
Likes: 0
Received 1 Like
on
1 Post
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Re: NEW FMIC Intercooler Radiator done
Testing
You can se the radiator is moved forward to give me more clearence with 12-rib setup and fans.
Painted
Airscoop mounted
The hood locking device would go right down in the IC so I had to adjust the hole with a hammer and bend the hook backwards, also made a protection plate for the IC.
Car is started some small issues left before testdrive……….
http://www.youtube.com/watch?v=RXGIGVI2HEU
You can se the radiator is moved forward to give me more clearence with 12-rib setup and fans.
Painted
Airscoop mounted
The hood locking device would go right down in the IC so I had to adjust the hole with a hammer and bend the hook backwards, also made a protection plate for the IC.
Car is started some small issues left before testdrive……….
http://www.youtube.com/watch?v=RXGIGVI2HEU
06-23-2010, 01:18 AM
#3
Supreme Member
iTrader: (7)
Join Date: Jul 2000
Location: Prince George, BC, Canada
Posts: 2,047
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 GTA
Engine: 5.7L Supercharged
Transmission: T-56
Axle/Gears: Moser 9" 3.70
Re: NEW FMIC Intercooler Radiator done
Looks well done, sure you don't want to add a scoop to the front to draw in more air or you think the air dam will be enough?
06-23-2010, 02:04 AM
#4
Supreme Member
Thread Starter
Join Date: Aug 1999
Location: sweden
Posts: 2,441
Likes: 0
Received 1 Like
on
1 Post
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Re: NEW FMIC Intercooler Radiator done
Will see....
I can add a xtra scoop fastened inn the lower bolts for the IC....
I've also thinking of cutting a hole in the front but havent seen anything that looks nice, would also like to keeo the sleeper look
I can add a xtra scoop fastened inn the lower bolts for the IC....
I've also thinking of cutting a hole in the front but havent seen anything that looks nice, would also like to keeo the sleeper look
Thread
Thread Starter
Forum
Replies
Last Post
