merc3065

I am selling this car as a rolling chassis with the following certified repairs/upgrades/replacement parts...

1988 Firebird GTA Notchback (factory)
KYB GR2 shocks and struts all around, brand new
Competition Engineering subframe connectors (bolt ons) installed
Custom 3" flopro mandrel bend exhaust to fit the subframe connectors (has 4" oval pipe to go underneath the subframes in stock location)
SLP 1 3/4" Shorty headers to go with the exhaust no AIR provisions
3" hiflo cat
Flopro V-Max 3" in 3" dual out muffler
New front springs (0 miles)
New Ball Joints (0 miles)
New front clip
New front side lower gfx
OEM Aluminum 2 core rad (17000 miles)
B&M transmission cooler (8000 miles)
Excellent condition GTA crosslace rims no curb rash
Freshly turned crossdrilled front rotors
Good condition Cooper ZPT tires 245/50/R16 30xxxmiles on 3, 0miles on 1
Calipers painted in High temp red paint
Freshly rebuilt power hatch motor
Headlight motors rebuilt
H4 headlight conversion kit (not installed)
New wiper blades
New BBK Walboro 255lph in tank fuel pump installed and working
New energy suspension front and rear sway bar end link bushings
Includes the rest of the energy suspension master rebuild kit new in box still
polyuerthane engine mounts (not installed but new in package still with OEM clamshells drilled and ready to accept)
New radio pod
Standard A/C controls but will include original digital climate control (no wiring harness sorry, wish it was there when I bought it)
Stereo wiring is run for stock speakers but no speakers included (ready for hook up)

Factory GTA style radio (don't know if it works)
Overhead console with firebird flashlight
9 Bolt Borg Warner 3.27:1 rear differential (79xxx miles)
Aluminum Driveshaft (79xxxmiles)
Black Carpetting in excellent condition
Black interior trim in good shape
Standard Black firebird seats (not GTA unfortunately)
Proper rear notchback seats but in tan (fresh recovers)
Standard T/A leather steering wheel (good shape not missing any leather) VATS completely bypassed/removed
Digital Dash no cracks and all lights working
165 ECM no PROM (or can include original VATS 1988 350 VATS prom/Jet Performance Stage 2 chip)
Power windows, Power locks, Power mirrors, power antenna
Replaced reinforcement bar and impact waffling
All front airdam pieces replaced with used whole parts but complete
Includes new OEM 1 piece airdam as well but currently setup for 3piece
Complete spare tire assembly including jack, wrenches, original air filler can, aluminum space saver spare (never inflated)
Will include all owners manuals but not original bill of sale (dont have it)

Replaced front fenders and painted flat black

Has doors replaced with excellent black trimmed and weatherstripping (flat black painted from red, so will need stripping and proper repaint) No sagging in the doors at all

Now for the bad parts...
Car was in an accident in 1997 in Florida (I have no other information) but has been completely repaired under carriage included.
Requires full strip and repaint
Has 1/4" stress crack on drivers side where roof meets rear main sail pillar
Hood requires body work on leading edge
Requires GTA emblems
Rear notchback hatch struts need replacing
Hood struts should be replaced
Has section of firewall , pass side, where the rain run off is located that is rusted, appxly 2" circle, NEEDS repairs there. The metal is a little weak in the area around it that is not rusted.
The trunk pan could either use replacement or a hammer to fix some of the dents in it but is structurally sound.

There is no other rust anywhere else on the vehicle, some light surface rust on the upper rad support where paint has flaked off, there are some light bits of surface rust on some factory welds in the trunk pan and on the exposed K member/a-arm parts...

The spare tire rack has been cut off and brazed back into place, it was not a clean job I admit so could definately be redone to clean it up
The sound deadening is removed
Needs a headliner
Needs foglights but wiring is present for it.
Chassis has 188xxxmiles on it

Would like $2500 for the complete assembled shell + shipping costs but will entertain offers...
Pics on request
send me a PM or email michael.r.clark@rogers.com

Thanks!

austin carey

pics to red neckpimpin351@tmail.com thanks


no space between red and neck