firbster

im not a reseller type ... more of a hoader type..i would like to find one more dash pad and another console pad.. and a couple other parts that get "used" up during the life of the car ..

i have a pointer .. if your window and door lock switches are in great shap .. cut a piece of clear tape and put it over them so you done wear off the printing.. i use 3M clear guard on mine.. works great..and its a low adhesive so it wont affect the printing..

84ta85

A dash cap for an 82-84 firebird/trans am with the double stitching or a cheaper replacement pad...I bought one on ebay that was perfect and got cracked during shipping.

t_towner

How 'bout an Aluminum hood and some Brembo brakes? ....having sort of a hard time finding extra's...

Firebreather

+1

chazman

iTrader: (4)

Some way to restore the factory lettering on the consoles, switches and radios of our cars....

87WS6

iTrader: (1)

That too would be nice. Well you can already do that but it requires buying new switches.

chazman

iTrader: (4)

The switches are easy. The console and radio faceplate - not so much.

KG427KG427

iTrader: (1)

i need fog lamps for a 1991 camaro and brackets!!

message me if u have a good 1's

kevingallette@yahoo.com

87WS6

iTrader: (1)

True.

tylercamaro

iTrader: (1)

id like an overhead console, headlight louvers, and i wish they made fenders with the 70s louvers on the side.
and alot of parts you can order from classic industries if you order their magazine/catalog altough it does get somewhat ridicuosly pricy sometimes

t-top havoc

iTrader: (3)

A REAL GM service manual. I know ppl get lucky on eBay...I just can't find one...been looking lately!! (any one got an extra for sale?? PM me!!!)

A complete wiring harness & fuse panel with a few extra fuse spaces, with detailed how-to, even for non computer controlled cars with ALL the wires from head lights to tail lights.

Sag-free t-top head liner.

Complete center consoles-- radio trim, climate control surround, climate control
delete.

Brett68

iTrader: (1)

Silver Iroc bumper emblem, dash pad(not cover).

Drew

iTrader: (58)

1987 Camaro

New
http://www.helminc.com/helm/product2...887&itemtype=B

Used
http://cgi.ebay.com/ebaymotors/1987-...sQ5fLiterature

1992 Camaro

New
http://www.helminc.com/helm/product2...892&itemtype=N

Used
http://cgi.ebay.com/ebaymotors/1992-...sQ5fLiterature


HELM still prints all of the factory service manuals, if you don't mind paying $75-110 for them. Otherwise you can find just about any year on Ebay if you're vigilant. There were at least 3 of each on Ebay... Maybe try a different search string... "1992 Camaro Service Manual" or "1987 Camaro Service Manual" worked for me.

Most of you guys are talking about stuff that's easy enough to find if you actually search for it. Or you're talking about things that don't fall under restoration parts. Don't forget, this is the History and Restoration forum, not the PIMP MY 'MARO forum.

58mark

iTrader: (3)

i found a 89 service manual for $25 in the first week I had my car.

I agree with whoever said a 5 speed shifter plate is needed. I got lucky and found one here for a good price. But they are few and far between

firbster

ya if you watch ebay you will find a service manual.. i got one just last sept.. was wactching for a while though... thanks to this thread now i know what ones to grab when i see them ..
shifter plate
dash pad..

GTA50

For me, it has to be the weatherstripping that goes around the doors. I believe the GM price is about $400 for both doors!!!!

On the topic of Helms manuals - that has got to be the best value for about $100 you can ever spend. I'm building the library of manuals for my cars and the Haynes manuals I'll use as doorstops and under table legs.

t-top havoc

iTrader: (3)

Thanks for the info Drew!! iPhone says "server cannot be found" whenever I try eBay. Home computer has problems.

1ATony-- Are you guys thinking about developing a 3rd gen part?

92RS_Ttop

iTrader: (3)

When I got my 92, I picked up a Chilton's manual for it, and its not much better than the Haynes manuals I've used in the past. I found my GM shop manual on Ebay after about 6 weeks of watching and waiting. The Chilton's manual I still use if I just need to look up the torque specs on something. It's a much smaller manual so its easier to find them than it is in my shop manual.

Brother Al

If you take the Haynes and Chilton Manual, you kinda get a complete repair manual so long as you don't go by all of the Non-3rd Gen F-body reference pics... LOL!

A1 Tony, are you still here? ...uhg, Mustang guys, sheesh!

Seriously tho, I'd bet we won't see many new Resto parts until the economy gets a lot better.

kevmann

I dont know if this was mentioned but what about rear inner fender wells? I have not found anyone carrying these.

Kevin

1ADan

iTrader: (4)

Hey guys, sorry if Tony hasn't gotten back (he's got a few forums he's gotta watch over. I just stick with the F-body stuff, so I'm here more than he is). We're definitely listening though! While we are trying to work with some of our suppliers on some new things, these things take a long while. However, we are always looking for new parts and new suppliers, so who knows what the future will bring

mister_hudson

iTrader: (3)

Couldn't agree more!!

Mark in Maine

Yah - affordable convertible interior parts - the stuff that was broken/missing from our cars if they weren't purchased in mint shape. . .

Andy 91GTA

iTrader: (2)

I own a green 92 GTA with beige leather interior and a 350 TPI that I am attempting to restore to showroom condition with a few performance upgrades when its done.

Here are the parts I want to buy as NOS if they were available:

1. license plate bracket screws
2. leather shifter - 14105800
3. spark plug clip for driver side by the distributor
4. Beige passenger side sunvisor for hardtop Firebird with flip up plastic cover over mirror - 10193422
5. Beige plastic headliner above the rear seat
6. beige plastic for cargo area at very back for hardtop cars only
7. beige passenger side rear cargo upper plastic with electric rear defroster, and cargo cover provisions
8. beige passenger lower rear seat plastic
9. beige front and rear carpet (rear carpet for hardtops only)
10. ac/heater black plastic duct that bracket for cruise control module attaches to - 3046458
11. passenger side park light - 16513084
12. Passenger side taillight - 5975534
13. passenger side air deflector airdam - 10118554
14. positive red battery cable - 12157284
15. hood insulator - 10031098 or 14099507
16. Intake air temperature wiring - 12029463
17. Power steering pressure hose - 26004126
18. passenger crankcase breather rubber hose - 10105287


Some nice to have NOS parts to restore my 92 GTA are as follows:

1. instrument panel vent - 10030316
2. right dash vent - 10033082
3. fuel filler door pocket - 10077471
4. windshield cowl plastic - 10053981
5. Black metal cap that cover screw in door handle plastic - 20454881
6. right rear front passenger seat bolt cover - 20356720
7. Driver side grey plastic cover for door handle/lock - 10181785
8. Black plastic cover for defog, hatch, and fog light switches - 10095233
9. driver black A pillar plastic - 10089469
10. passenger black A pillar plastic - 10089468
11. passenger black C pillar plastic - 10125294
12. driver headlight housing kit - 16514587
13. passenger mirror gasket - 20364442
14. passenger side big bracket for headlight assembly - 16516622
15. grey panel that goes over top of guages - 10095260
16. intake bellows - 14094720
17. black plastic surrounding dimmer and headlight switch - 10030281
18. Outside Power Mirrow Switch - 20526094
19. Fuses Plastic cover - 10209456
20. tire inflator - 9590679
21. passenger retainer (triangle rubber on door) - 10198202
22. driver retainer (triangle rubber on door) - 10198203
23. leather emergency brake handle - 10035957
24. passenger rear hood extractor (screen) - 10030570
25. driver rear hood extractor (screen) - 10030571
26. beige under hatch plastic - 10181887
27. beige coat hook - 16162213
28. beige driver sail panel - 10181863
29. beige passenger sail panel - 10181862
30. Beige Driver Side Cupholder Screw Cover - 14099511
31. Beige Passenger Side Cupholder - 10181884
32. Beige Passenger Side Cupholder Screw Cover - 10181886
33. beige plastic caps for hatch supports - 10193311
34. beige hatch bolt covers - 10181888
35. beige driver rear hatch bolt beige clip - 10181889
36. beige passenger rear hatch bolt clip - 14099562
37. beige driver side door sill plastic - 10181851
38. beige passenger side door sill plastic - 10181850
39. Beige Driver Side Seatbelt - 10164993
40. Beige Passenger Side Seatbelt - 10164992
41. beige driver side armrest - 10181883
42. beige rear cargo area screws (retainers) - 10181846

I also own a red 91 GTA with black cloth interior, T-Tops and a 305 TPI auto. Here are some parts I'd want to buy NOS if they were avaiable:

1. grey panel that goes over top of guages - 10095260
2. front and rear black floor mats
3. Air bag sticker - 10125254
4. T-Top stickers - 10141490
5. Passenger side black plastic below rocker panel - 10027611
6. rear passenger sidemarker light - 915572
7. passenger park light - 16513084
8. driver side rad support baffle - 14101675
9. coolant overflow hose (non braided)
10. passenger wiring for electric rear defrost


Some nice to have NOS parts to restore my 91 GTA are as follows:

1. fuel filler door pocket - 10077471
2. windshield cowl plastic - 10053981
3. T-Top drip plastic - 10198353
4. T-Top driver handle - 20255909
5. bright red passenger side fender molding - 20682922
6. Driver side flat black plastic headlight cover - 10118513
7. passenger rear hood extractor (screen) - 10030570
8. driver rear hood extractor (screen) - 10030571
9. passenger side air deflector airdam - 10118554
10. passenger black front seatbelt kit - 12500488
11. passenger black front female seatbelt - 12504428
12. passenger mirror gasket - 20364442
13. driver headlight housing kit - 16514587
14. Black plastic cover for defog, hatch, and fog light switches - 10095233
15. black driver side armrest - 10159065
16. black passenger side armrest - 10159064
17. black passenger side hatch support bolt plastic - 20522978
18. black hatch support bolt cover - 20560143
19. black under hatch plastic - 10181810
20. black driver sail panel - 10159007
21. black passenger sail panel - 10159006
22. black lower rear passenger seat plastic - 10095278
23. lower rear driver seat plastic - 10095279
24. Black Driver Side Door Sill Plastic - 20540779
25. passenger black door sill plastic - 20540778
26. Cruise Stalk - 25111209
27. rubber seals at the bottom of doors - 20395138
28. Reinforcement for front bumper - 10118418

Its unfortunate that these parts are all discontinued when there is still a demand for them and down the road, a lot of people are going to want to restore their thirdgens. Who knows how many NOS parts GM destroyed. A member of my local car club works at a GM dealership and he told me his work had a new 85-92 TA hood that had been sitting for years. GM paid the dealer for the hood and said to throw it out. The guy who works there wanted it but the dealer wouldn't let him take it.

If anyone has any of the above NOS parts kicking around or if you have any leads on any, feel free to pm me or email me at andy91gta at hotmail dot com. Thanks.

J. R. Deel

I know one thing that I am having a hard time finding is a reproduction steel hood for 1985-1992 Z28 camaros. The ones that I do find are original and have dents and STILL have 400 to 500 dollar price tags! These hoods used to be a dime a dozen 10 years ago. One thing that I noticed about these hoods is most of them crack toward the front corners on the edge near the fender. Hood blistors for 1991 and 1992 camaros that dont cost 300 dollars. Wheels for 1989 IROCZ cars? What about repros of the air filter assemblies for tune port cars? Dash cluster sets for 91 and 92 camaros that dont cost 350 to 500 used.

mister_hudson

iTrader: (3)

I've got a couple used clusters that I would sell for about half of that plus shipping... LMK if you are interested via PM...

MY87LT

iTrader: (2)

I would like to get 1986-87 Sport Coupe, Berlinetta, LT specific fog light brackets. Those things are a pain to come by and missed a set on here a while back.

jj74sd455

id like to find a fibreglass rear spoiler for my 89 for a decent price

Tanaman

I would like to find a mint ORIGINAL GM rear spoiler and black leather seat covers. If I ever do find them I am sure I couldn't afford them though.

IROC-MIKE

I really need to locate a High Output rear bumper emblem in red, but I'd be happy to get one in any color that's not broken or chewed up from removal. Also need to find a combination fog lamp / rear wiper switch. This was a two position rocker that operated both the fogs and rear wiper. The fog only just went from center to up. This goes both up & down. The rear wiper switches are hard enough to find but I've never seen another dual function switch in any condition. Mine still has the original switch but its lettering is almost completely worn off.
These are for my silver / red decal, black L/S interior, L69 5-speed, T-Top IROC. Built November 1984. One of the first IROC's off the line!

MY87LT

iTrader: (2)

Found some on Ebay recently. Cleaned them up, primered and painted them with gloss black Rustoleum. Looks good. Compared them to the other brackets I had mistakenly ordered a while back from an IROC and totally different in shape.

SolarGoldRaptor

All sorts of 82-84 Firebird parts :
- 83-84 Trans Am and DT500 front bumper inserts
- Firebird Lear Siegler seat covers repro (at least the front bottoms with the bolster, it's the only difference with Deluxe seats covers)
- center console knee pad
- dash board (not just a cover)
- headlight bezels

mach12005

A hardware kit for a factory rear window louver.

87WS6

iTrader: (1)

For the most part the big stuff is easy enough to get ahold of or to recondition with a few exceptions. When restoring these cars or trying to make your ride look new again those little things here and there add up. It can be quite frustrating to find everything you need.

slick76120

1990 Iroc-Z, Need all three Park Brake Cables. Very, Very Hard To Find. Is there any replacement parts out there any one knows about if these cant be found?

Grndtrsms@yahoo.com

slick76120

I am deployed at the moment, keep me informed Grndtrsms@yahoo.com

I'll bring mine next time

jj74sd455

it would be nice to find a good hex head bolt replacement kit for tpi engines,hate the torx and allen heads-throw off torque reading

whitedevilTA

iTrader: (8)

YES the cowl screen would be AWESOME! I need one real bad. Also interior pieces in BLACK!! Why are grey and tan available but not black?? Who wants grey or tan?? LOL.

Guest

a new hood pad for a turbo trans am 1989......a drivers side seat belt of course in beechwood, a new rear cargo screen, new tail light lenses.....(dreaming). if anyone out there hears me... ellas01@optonline.net Pete

fireracer00

I would honestlt like to see an engine cover like the new camaros have or even some like the ls1 corvetts and gtos had. They clean up the engine bay so much and hide all the nast hoses and mass amounts of wires our cars have. Just a thaught I'm trying to make one myself by modifying one from a hemi 5.7 charger its the only thing I can think of sence the plenum is so high on the motor

actarnoff

iTrader: (1)

I would love to see a 91-92 turn signal lever with the proper color letters (yellow).

iroc stangs

um, a magnaflow exhuast, tags, title, registration, brakes, shocks/stuts/springs. This is just to get her street legal and safe!

*84TA

I would pay good money for a new 82-84 Firebird console and 5speed shift plate. These parts are not available anywhere. I have 2 84's with new carpet, headliners, seats, etc. The interior looks great minus the console.

I know that there is not huge market for these parts, but I think if priced well they would sell. This goes for all other 82-84 specific parts as well.

SolarGoldRaptor

The little removeable corners of the center console would be great as well, they're always broken or missing.

82CrossFire Z28

iTrader: (1)

Take a look here. They have one for delay wipers but no cruise control.

http://www.moderndaymuscle.com/

eastcoast1

I have a 1991 ta convertible. Need black seatbelts any ideas?

thanks

actarnoff

iTrader: (1)

I have cruise control...My guess is that these are new old stock.

Vachaun22

iTrader: (3)

Things I haven't seen listed in this thread:

1. Speaker grills
2. Reproduction wiring harnesses (or at least the parts to build your own)
3. All the decals on the car (ie: tire pressure, warnings, hose routings, emissions, anything else required for accurate restoration)



Things I also look for that have been listed:

1. Accurate repop center consoles for 85-92
2. Console lids that aren't overly expensive
3. Upper center consoles for radio that doesn't cost an arm and a leg
4. Reproduction steering wheels
5. Accurate Aero style wings that aren't made out of gold (not fiberglass)

MNformula350

iTrader: (2)

90-92 Firebird Switch Panel (Above the Radio/Climate Controls), With NO holes cut out for switches (rear derost, Fog Lights etc...)

I have had a couple with both 2 or 3 switch holes, I even saw one or two with only 1, But have never been able to get a hold of a panle with none.

I had the GM Part# at one time, but that was 2 Divorces ago.

GM Discontinued it in 96

MNformula350

iTrader: (2)

Here is when I had a 3 Switch Panel in my Car (I used a Factory Fog Light switch for the Electric Fans)


And here is waht I have now, A single switch Panel, But I Have non Rear Defrost Hatch I am going to put on, so the Rear Defropt Switch will look funny