GTA style seats- grey cloth
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Dec 2000
Location: Buffalo, NY
Posts: 2,361
Likes: 0
Received 2 Likes
on
1 Post
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
GTA style seats- grey cloth
I would like to sell the set complete, but am willing to separate the fronts and rears. They are definitely in usable condition, but not great condition. Looking for $100 for the full set. MUST be picked up in the Buffalo, NY area.
#4
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: GTA style seats- grey cloth
are they power (driver and/or passenger???) and in what way? just the track moving foward and back and the seat back moving foward and back? or are the headrests, side bolsters and height electrically adjustable too? and does everything work?
do you have the wiring harnesses by any chance? is there any rips that aren't able to be seen in the pics? and do you have the passenger side seat belt holder and cap by any chance?
do you have the wiring harnesses by any chance? is there any rips that aren't able to be seen in the pics? and do you have the passenger side seat belt holder and cap by any chance?
Last edited by 84redta; 10-28-2007 at 03:08 PM.
#5
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: GTA style seats- grey cloth
Really interested, just need that info!!!
#6
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Dec 2000
Location: Buffalo, NY
Posts: 2,361
Likes: 0
Received 2 Likes
on
1 Post
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
Re: GTA style seats- grey cloth
the material is actually in very good shape with no rips or tears. There is a blemish on one of the rear cushons that looks like a cigarette burn, was actually from a weld splatter. The foam in the front seats could be better... the outside bottom bolster supports are flattened out, particularly on the passenger seat.
As you can see in the second picture, the seatbelt loop is missing on the passenger seat. That was missing when I got the seats. The headrest adjustment **** is broken off the drivers seat, but I believe I do still have it around and will include it.
The seats are manual. They came equipped with the inflatable lumbar and bolsters (that's what the buttons on the drivers seat are for) but I never tried hooking them up. It's possible it works, but I wouldn't count on it. I do have the black box that powers the inflation, but I can't be sure I have all the necessary parts.
Someone had inquired in email about shipping them. I'm a very honest seller and I just don't feel they're in good enough condition to be worth the additional cost of shipping. They're definitely in very usable condition though. 84redta, let me know if you need any additional info or if you'd like to arrange to pick them up. Thanks
As you can see in the second picture, the seatbelt loop is missing on the passenger seat. That was missing when I got the seats. The headrest adjustment **** is broken off the drivers seat, but I believe I do still have it around and will include it.
The seats are manual. They came equipped with the inflatable lumbar and bolsters (that's what the buttons on the drivers seat are for) but I never tried hooking them up. It's possible it works, but I wouldn't count on it. I do have the black box that powers the inflation, but I can't be sure I have all the necessary parts.
Someone had inquired in email about shipping them. I'm a very honest seller and I just don't feel they're in good enough condition to be worth the additional cost of shipping. They're definitely in very usable condition though. 84redta, let me know if you need any additional info or if you'd like to arrange to pick them up. Thanks
#7
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: GTA style seats- grey cloth
is it driver side and passenger side inflatable lumbar and side bolsters? And from the looks of it, there is an arm in the front to do something with the bottom cusion? Am i right and what exactly does it do? Lift and lower the bottom bolsters? Other than that i am pretty interested, just a lil weary on the 5 hour drive...you said that you would seperate front from the rears?
Trending Topics
#8
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Dec 2000
Location: Buffalo, NY
Posts: 2,361
Likes: 0
Received 2 Likes
on
1 Post
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
Re: GTA style seats- grey cloth
yes, the inflatable bolsters are on both seats. That front bar you see is great, it lifts that front part of the seat that is under your knees. It can be set at multiple positions. I was kinda disappointed that the bar isn't there on the 4th gen seats I got because I really like that feature.
I did say that i'd separate them, but I prefer to sell them as a set. So if one person offers to buy just fronts, and another to buy the set... I'd go with the person buying the set.
I did say that i'd separate them, but I prefer to sell them as a set. So if one person offers to buy just fronts, and another to buy the set... I'd go with the person buying the set.
#9
Junior Member
Join Date: Oct 2007
Location: Buffalo, NY
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Re: GTA style seats- grey cloth
Can you email me your phone number. I will see if I can pick them up. Thanks, Zach my email is scaz24@hotmail.com
#10
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: GTA style seats- grey cloth
PM Sent!
#12
Member
Join Date: Aug 2007
Location: St Louis Missouri
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Trans Am Convertible
Engine: 5.0L
Re: GTA style seats- grey cloth
Jeremy,
If you really liked the mechanism under the 3rd G seats you should be able to swap the mechanisms between a 3rd G and 4th G seat. Put the 4th G mechanism under the 3rd G seat and sell them. Just a thought, if you were disappointed with your seat swap that might make it better.
Good luck with the sale.
-Jeff
If you really liked the mechanism under the 3rd G seats you should be able to swap the mechanisms between a 3rd G and 4th G seat. Put the 4th G mechanism under the 3rd G seat and sell them. Just a thought, if you were disappointed with your seat swap that might make it better.
Good luck with the sale.
-Jeff
#13
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Dec 2000
Location: Buffalo, NY
Posts: 2,361
Likes: 0
Received 2 Likes
on
1 Post
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
Re: GTA style seats- grey cloth
Jeremy,
If you really liked the mechanism under the 3rd G seats you should be able to swap the mechanisms between a 3rd G and 4th G seat. Put the 4th G mechanism under the 3rd G seat and sell them. Just a thought, if you were disappointed with your seat swap that might make it better.
Good luck with the sale.
-Jeff
If you really liked the mechanism under the 3rd G seats you should be able to swap the mechanisms between a 3rd G and 4th G seat. Put the 4th G mechanism under the 3rd G seat and sell them. Just a thought, if you were disappointed with your seat swap that might make it better.
Good luck with the sale.
-Jeff
actually, I just looked at that yesterday and it turns out it wouldn't work. The 4th gen seat covers don't have the separation between those parts of the cushion that the 3rd gen ones have to allow the upward and downward movement. I'm very happy with the swap though, that was just a minor feature that I expected to have carried over to the 4th gens.
#14
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Dec 2000
Location: Buffalo, NY
Posts: 2,361
Likes: 0
Received 2 Likes
on
1 Post
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
Re: GTA style seats- grey cloth
Still available. I'll do $80 for the whole set if you can come pick them up. Zip code is 14227
Thread
Thread Starter
Forum
Replies
Last Post