impala harness guys need help?
#1
Member
Thread Starter
Join Date: Feb 2001
Location: Cape Girardeau,MO
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85&95 Trans am
Engine: 85-LT1 95-LT1
Transmission: 4l60e & 4l60e
Axle/Gears: 3.23 & 3.23
impala harness guys need help?
I've got all the gauges labeled from my bulkhead connector(c100) and the purple starter wire B4. A4 and G5 red power wires. I plan on using the underhood fuse box that is in the lt1 harness. I've found all the gauge wires from the c205 connector on the impala harness.
1.) Do I need anything out of the clear c207 connector?
2.) All the wires from the ecm can be deleted right?
3.) What other wires from the impala harness need to be spliced?
1.) Do I need anything out of the clear c207 connector?
2.) All the wires from the ecm can be deleted right?
3.) What other wires from the impala harness need to be spliced?
#2
Member
Thread Starter
Join Date: Feb 2001
Location: Cape Girardeau,MO
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85&95 Trans am
Engine: 85-LT1 95-LT1
Transmission: 4l60e & 4l60e
Axle/Gears: 3.23 & 3.23
Re: impala harness guys need help?
Anyone?
need to know where to put wires A,B,C,E from the black 6 pin connector
wires C1,C2,G1 of the 37 pin connector
H5,H6 are the park/neutral switch, but which do I need?
need to know where to put wires A,B,C,E from the black 6 pin connector
wires C1,C2,G1 of the 37 pin connector
H5,H6 are the park/neutral switch, but which do I need?
Thread
Thread Starter
Forum
Replies
Last Post