Go Back   Third Generation F-Body Message Boards > Tech Boards > Auto Detailing and Appearance > Members Camaros
Sign in using an external account
Register Forgot Password?

Members Camaros Post pictures and information about your Third Gen Sport Coupe, Berlinetta, LT, RS, Z28, and IROC-Z28 Camaros!

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 06-17-2007, 12:21 PM   #1
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
My first car! 1987 camaro! suggestions please!

Hey this my first car. It is a 1987 Camaro 305 V8. It is all stock except for a new exhaust system and an Edelbrock Carb. (( which can bee seen below)) It is rust free and runs strong. Although paint is starting to chip off and some places missing so im going to paint it eventually ((please suggest colors i should paint it)). Im also looking to put some IROC-Z rims on it too (( if some one is selling thiers please let me know!!)). So its a work in progress but tell me what you think so far. Also let me know what else would look cool on it or in it.










VIDEO OF MY EXHAUST
http://www.youtube.com/watch?v=arXWmtX2Cfw

VIDEO OF A WALK AROUND
http://youtube.com/watch?v=r9Lf-dAf8Cc
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 06-27-2007, 04:45 PM   #2
Junior Member
 
Join Date: May 2007
Posts: 5
Car: 1987 Camaro RS
Engine: v6
Transmission: 5-Speed

Classifieds Rating: (0)
Send a message via AIM to yourtoyslive
Re: My first car! 1987 camaro! suggestions please!

Not bad at all. Check my 87 RS if you find time. I just dont like that external 3rd brakelight on our 87 and under lol
yourtoyslive is offline vBGarage Page   Reply With Quote
Old 07-01-2007, 01:17 AM   #3
Supreme Member
 
The Project's Avatar
 
Join Date: Oct 2006
Location: West of Toronto
Posts: 2,363
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn

Classifieds Rating: (3)
Re: My first car! 1987 camaro! suggestions please!

Welcome to the board............

Go to the classified section and you will find LOTS of IROC rims for sale. GOld IROC rims would be nice!

As for colour......stay with the black or medium to dark blue.

FYI...........In case you were wondering, in Canada we do spell it colour not color. LOL
__________________


Will race for Scooby Snacks
...beaten ...abused ...enjoyed ...driven


My build - http://www.thirdgen.org/techboard/me...ml#post4511979
The Project is offline vBGarage Page   Reply With Quote
Old 07-01-2007, 02:27 AM   #4
Senior Member
 
MillerTime21's Avatar
 
Join Date: Jan 2004
Location: Lisle,IL
Posts: 560
Car: 94 25th TA
Engine: 355LT1
Transmission: T-56
Axle/Gears: 10bolt 3.42

Classifieds Rating: (0)
Send a message via AIM to MillerTime21
Re: My first car! 1987 camaro! suggestions please!

Welcome! Your right about needing some Iroc rims, cause those rims are UGLY. I also think you should keep it black. And maybe an Iroc hood or cowl hood. the stock hood is to plain and boaring for me.
MillerTime21 is offline vBGarage Page   Reply With Quote
Old 07-01-2007, 02:42 AM   #5
Senior Member
 
HCR13's Avatar
 
Join Date: Dec 2006
Location: Augusta, Ga
Posts: 2,213
Car: 1987 Trans Am
Engine: 355ci L98 soon to be turbo'd
Transmission: 700R4
Axle/Gears: 2.73 posi

Classifieds Rating: (5)
Re: My first car! 1987 camaro! suggestions please!

Nice car, how is the interrior? You should gut all the A/C and its horrible cables and put some ceramic headers and that thing would look sweet...
__________________
Mods so far: MSD Cap and rotor, MSD ignition coil, Accel 8.8mm ignition wires, Hooker Super Comp Shortie Headers, Flowmaster 3in catback, underdrive crank pulley, custom cold air intake, NOS wet 125 shot, air foil and a lead foot! no E/T's yet. ...TURBO COMING SOON...Other mods include keyless entry and remote start, and Sequential Turn Signals.
HCR13 is offline vBGarage Page   Reply With Quote
Old 07-01-2007, 04:39 PM   #6
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

Hey i agree with u about the rims and about the hood. I plan on buying a cowl hood before painting it. And i most likly will piant about the same dark blue tht it is currently. And also i am going to buy new headers and clean up tht big heap of wirey mess and get some new valve covers (probly chrome). Here are some interior pics and the third brake light.








DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-02-2007, 12:23 PM   #7
Senior Member
 
83camaroMN's Avatar
 
Join Date: May 2006
Location: Minnesota
Posts: 581
Car: 1998 Mustang
Engine: 3.8L V6
Transmission: Automatic with overdrive
Axle/Gears: 2.73:1 axle ratio

Classifieds Rating: (0)
Nice looking car, I used to have the same rims on my camaro
If you are gonna paint it I would go with silver or blue.
__________________
1998 Mustang

Might be getting my 83 camaro back for free but it will no longer be my project it will be my winter beater drive it till it drops and junk the POS.
----------------------------------------------------------------------
1983 camaro berlinetta Sold but might be getting back for a beater

Good times with this car
Cardomain camaro berlinetta
83camaroMN is offline vBGarage Page   Reply With Quote
Old 07-02-2007, 12:30 PM   #8
Senior Member
 
2tonedmaro89's Avatar
 
Join Date: Sep 2006
Location: oviedo, FL
Posts: 345
Car: '91 RS
Engine: 5.0L gross *** tbi
Transmission: 700r4
Axle/Gears: 2.73

Classifieds Rating: (0)
Send a message via AIM to 2tonedmaro89 Send a message via Yahoo to 2tonedmaro89
Re: My first car! 1987 camaro! suggestions please!

i'd put 91-91 gfx on it and keep it that color but with a lil bit of flake...
__________________

'91 RS 3.1L

'89 RS 2.8(R.I.P)
2tonedmaro89 is offline vBGarage Page   Reply With Quote
Old 07-02-2007, 12:32 PM   #9
Senior Member
 
83camaroMN's Avatar
 
Join Date: May 2006
Location: Minnesota
Posts: 581
Car: 1998 Mustang
Engine: 3.8L V6
Transmission: Automatic with overdrive
Axle/Gears: 2.73:1 axle ratio

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

Quote:
Originally Posted by MillerTime21 View Post
cause those rims are UGLY.
I don't think they are ugly only thing I don't like about them is no matter what you do they will always corrode thats why I got rid of mine.

Quote:
Originally Posted by 2tonedmaro89 View Post
i'd put 91-91 gfx on it and keep it that color but with a lil bit of flake...
That would look good, But be warned they will rust out your car so fast it wont be funny.
83camaroMN is offline vBGarage Page   Reply With Quote
Old 07-02-2007, 12:53 PM   #10
Member
 
JimmyDavidson's Avatar
 
Join Date: Apr 2006
Location: Manchester, TN
Posts: 254
Car: 1984 Camaro z28/SC
Engine: 355
Transmission: T56
Axle/Gears: 9bolt 3.89

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

Nice car... Here's what I would do if it was my car. I'd keep it like it is, a non-gfx car(especially dont add the 91-92 "snow plow" GFX, lol). Then I'd add a 2" 69 Camaro style cowl hood to it. I'd paint it black(or a darker Royal blue) and then Id either go with black or keep the tan interior, maybe go with leather seats though(but thats up to you). I'd probably put some different wheels, keep it 15" or 16" only though, any larger looks odd on a non-gfx car. Good luck with the car, looking forward to seeing its progress.
JimmyDavidson is offline vBGarage Page   Reply With Quote
Old 07-02-2007, 02:22 PM   #11
Senior Member
 
Tobias05's Avatar
 
Join Date: Jul 2003
Location: any clime or place...
Posts: 2,776
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

nice looking camaro! first thing i would do is to find a real instrument cluster, and swap appropriate senders. after that i'd get rid of that hideous 3rd brake light.

...curious. i thought that if an 87 came w/ a spoiler, it'd have the 3rd brake light in it? is the spoiler original?
__________________
1987 Chevrolet Camaro Sport Coupe-assorted shades of rust
13.75@102.2mph on 2.1 60'
"rust rocket"
...someday hope to install FAST EZ EFI...
1999 Chevrolet Camaro Z28-Artic White, Flame Red Cloth
Full Bolt-Ons, Tuned by Frost, Hurst Billet, Bilsteins, Zr1s
Tobias05 is offline vBGarage Page   Reply With Quote
Old 07-02-2007, 03:04 PM   #12
Senior Member
 
KBcobra's Avatar
 
Join Date: Nov 2006
Location: Wyoming
Posts: 400
Car: 92 Chevrolet Camaro RS
Engine: 3.1L V6
Transmission: T-5
Axle/Gears: 3.42

Classifieds Rating: (0)
Send a message via MSN to KBcobra
Re: My first car! 1987 camaro! suggestions please!

i agree 91-92 GFX, and maybe a 91-92 z28 wing, rims, and hood. pretty good find, if i recall only '86 had that high mounted light (please correct me if i'm wrong)?
__________________
1992 Chevorlet Camaro RS 25th Anniversary
3.1L V6 191ci
K&N filter, new custom exhaust 2.5" downpipe from manifolds back, cat delete, Flowmaster 80's series muffler.
Audio: Alpine CDE-9881 deck, Lanzar Opti500X2, 2 12" SWR-1222D Alpine Type R.
SOON LSx/T-56 swap If I get the money !
KBcobra is offline vBGarage Page   Reply With Quote
Old 07-03-2007, 12:27 AM   #13
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

Yea you guys are correct about the third brake light in the 87's which mine is but it was made september of 86. The spoiler was on the car when i bought it and i can tell for shure that it was put on after origanally bought whether it was the first or second ower that did it. BTW thanks for all your guys suggestions and comments!!
----------
Early 1987 sport coupes had the option of having the rear spoiler or not so thts probly why the light is there.

Last edited by DanniBoi91; 07-03-2007 at 12:31 AM. Reason: Automerged Doublepost
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-06-2007, 06:01 AM   #14
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

Hey guys i just got done taking all of the stickers off of the camaro it looks so sharp will wash in morning and get pics up ASAP!
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-08-2007, 02:42 AM   #15
Senior Member
 
86NiteRider's Avatar
 
Join Date: Dec 2000
Location: Somewhere around the South Side of Chicago just crusin' in one of the Niteriders
Posts: 3,217
Car: 92RS 25th Anniv./88 IROC Z28 Vert
Engine: 305 TBI w/Tpi Air / 305 TPI
Transmission: 700r4/700r4
Axle/Gears: Posi

Classifieds Rating: (10)
Send a message via AIM to 86NiteRider
Re: My first car! 1987 camaro! suggestions please!

Once you decide if you are staying "stock" or going modified to what ever level, you will know what to do. Nice car. Have fun with it is my suggestion. I have two different style, yet the same generation Camaro's in my '86 & my '92. Only your imagination and the availabilty of parts will hold you back. Stay with the dark colors like black or blue.
__________________

88 Camaro IROC Z28 Convertible
92 Camaro RS 25th Anniversary
2nd place Best Interior-'09 3rd Gen Fest
1st place Best Interior-'08 3rd Gen Fest
3rd place Camaro Modified-'08 3rd Gen Fest
86NiteRider is offline vBGarage Page   Reply With Quote
Old 07-08-2007, 11:39 PM   #16
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

hey im thinking about buying those headers pretty soon. I need some good sounding headers and a good y pipe for less then $350. Ive heard so many different things on this site about all the different headers but dont kno who to believe so if any one could help me out tell me what sounds good and fits my price that would be great!! THNX!!!!
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-08-2007, 11:45 PM   #17
Senior Member
 
formul8!!'s Avatar
 
Join Date: Jan 2001
Location: www.thirdgentech.com
Posts: 1,609
Car: 2004 GTO
Engine: LS1
Transmission: T-56

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

The Pole Position steering wheel and those rims need to go, but looks like a nice car!
__________________

www.thirdgentech.com
formul8!! is offline vBGarage Page   Reply With Quote
Old 07-09-2007, 07:33 AM   #18
Senior Member
 
Bad-Newz's Avatar
 
Join Date: Jun 2006
Location: Toronto, Ontario Canada
Posts: 260
Car: '88 Camaro / '91 Camaro RS
Engine: 3.1L MPFI V6 / 3.1 MPFI V6
Transmission: 700R4 / 700R4
Axle/Gears: ??? / 3.23's

Classifieds Rating: (0)
Send a message via MSN to Bad-Newz
Re: My first car! 1987 camaro! suggestions please!

I say keep it black and put some nice rims on there... U can most likely get away w/o the GFX like that, but it's your choice of course...
__________________

1991 Chevrolet Camaro RS w/ T-tops - 3.1 MPFI V6 - IROC hood - K&N Filter - Dynomax Exhaust - 16'' ZQ8 wheels - Tint - speaker upgrades: Pioneer 4x6's; Kaption Audio 6x9's - some other crap... http://www.cardomain.com/ride/2480021
Bad-Newz is offline vBGarage Page   Reply With Quote
Old 07-09-2007, 08:43 AM   #19
Senior Member
 
305q_ta86's Avatar
 
Join Date: Aug 2004
Location: Calgary, AB
Posts: 1,989
Car: 1993 Nissan 240sx
Engine: Turbo KA24DE
Transmission: 5 spd
Axle/Gears: 4.08 VLSD

Classifieds Rating: (1)
Re: My first car! 1987 camaro! suggestions please!

You sure that ain't an 86? 86 was the only year the brake light looked like that..


anyhow, nice car. And good job, that's way better'n my first car..



Oh yeah, and here's MY third brake light.

305q_ta86 is offline vBGarage Page   Reply With Quote
Old 07-16-2007, 02:03 AM   #20
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

This is the car without those stripes on it.
Pretty soon im going to be buying a Headman Y-pipe and Hooker headers.

DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-16-2007, 03:32 PM   #21
Supreme Member
 
85_ZED28's Avatar
 
Join Date: Jan 2001
Location: London, ON
Posts: 2,175
Car: '85 Z28
Engine: 350
Transmission: T5
Axle/Gears: 3.23

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

Nice car, have fun with it!
__________________

'85 Camaro Z28 350 5 speed
85_ZED28 is online now vBGarage Page   Reply With Quote
Old 07-25-2007, 11:06 PM   #22
Junior Member
 
Join Date: Oct 2006
Location: N.J.
Posts: 4
Car: camaro 91 z28
Engine: 350
Transmission: auto
Axle/Gears: 356

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

nice looking car,it looks mint..

Was that car stolen or did you pop off the ignition ring?
89crxyellow is offline vBGarage Page   Reply With Quote
Old 07-25-2007, 11:57 PM   #23
Senior Member
 
slow_90firebird's Avatar
 
Join Date: Jul 2007
Location: Manchester, CT + Nashua, NH
Posts: 1,461
Car: 90 Firebird Formula
Engine: LO3
Transmission: T5
Axle/Gears: 3.08 one wheel peel

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

Nice find. If this is your first car, im sure you will really enjoy it - just be careful.

Anyhow, I was wondering if that was a bolt on exhaust system, or just a muffler, and how was it put on? I kinda like the way it sounds.
slow_90firebird is offline vBGarage Page   Reply With Quote
Old 07-26-2007, 12:26 AM   #24
Senior Member
 
xgtharo86x's Avatar
 
Join Date: Jun 2006
Location: Oviedo,Florida
Posts: 692
Car: 86' Trans am
Engine: 85 LG4-non cc carb(building a 350)
Transmission: Rebuilt 700R4,vette servo,2200stall
Axle/Gears: 2.73 Posi

Classifieds Rating: (1)
Send a message via AIM to xgtharo86x
Re: My first car! 1987 camaro! suggestions please!

id say ditch the rims and steering wheel and put some gfx on it
__________________

"Real cars don't power the front tires, they lift em'."

86' Trans Am- 85 LG4 with 77 non cc qjet elderbrock intake manifold...hedman headers( shorty style)..3" piping flowmaster 80 series..no emissions...4thgen center console..restored interior..2400watt system..700r4 with 2200 stall and corvette servo, shift kit..2.73 Posi..Torque Thrust II's.. FINALLY building my first 350
xgtharo86x is offline vBGarage Page   Reply With Quote
Old 07-26-2007, 12:44 AM   #25
Senior Member
 
KYLE87's Avatar
 
Join Date: Mar 2007
Location: South of Dallas, Texas
Posts: 861
Car: 1987 Chevy Camaro Sport Coupe
Engine: 305 LG4
Transmission: 700r4
Axle/Gears: 2.73's

Classifieds Rating: (2)
Re: My first car! 1987 camaro! suggestions please!

I alsohave an 87, I haft to disagree with what most of everyone said. For sure get the spoiler brake light and ditch that one, But personally dont think you should put ground effects if it didnt come with them, why make it look like something its not?? I agree on the cowl hood, I just got one for mine and its in the paint shop now. You can get by with those rims, but Chrome irocs would look a lot cooler. I would also upgrade to the 145 speedometer becasue it can go well over 85, ive gotten mine to 130 and still had some push but i quit due to traffic ahead. Iveheard nothing but bad news with the edelbrock carbs so be careful with that. Love the car btw

Kyle
KYLE87 is offline vBGarage Page   Reply With Quote
Old 07-26-2007, 05:47 PM   #26
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

I dont think im ever going to put ground effects on my car. Where I live I only see RS's Z28's and IROC's. So i like the sports coupe look and I think its cool.

About the steering wheel, I bought that and I like it so if you dont im sorry.

About the ignition ring, it was like tht when i bought the car.

About the exhaust, it was all new Napa stock replacement from the cat. back. I am ordering the Hooker headers and Headmen Y-pipe from Summit racing when i get my debit card in two weeks. Then she'll sound like a beast!

I also plan on buying a JET stage 2 chip probly some time next month.

And also i went down to the car junk yard and got a headliner, sunvisors, weatherstripping for the doors, drivers side front turn signal light, two front speakers, and a dome light with blue bulbs
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-26-2007, 06:03 PM   #27
Senior Member
 
KYLE87's Avatar
 
Join Date: Mar 2007
Location: South of Dallas, Texas
Posts: 861
Car: 1987 Chevy Camaro Sport Coupe
Engine: 305 LG4
Transmission: 700r4
Axle/Gears: 2.73's

Classifieds Rating: (2)
Re: My first car! 1987 camaro! suggestions please!

Quote:
Originally Posted by DanniBoi91 View Post
I dont think im ever going to put ground effects on my car. Where I live I only see RS's Z28's and IROC's. So i like the sports coupe look and I think its cool.

About the steering wheel, I bought that and I like it so if you dont im sorry.

About the ignition ring, it was like tht when i bought the car.

About the exhaust, it was all new Napa stock replacement from the cat. back. I am ordering the Hooker headers and Headmen Y-pipe from Summit racing when i get my debit card in two weeks. Then she'll sound like a beast!

I also plan on buying a JET stage 2 chip probly some time next month.

And also i went down to the car junk yard and got a headliner, sunvisors, weatherstripping for the doors, drivers side front turn signal light, two front speakers, and a dome light with blue bulbs

What is a jet stage 2 chip? Im knew to that?
KYLE87 is offline vBGarage Page   Reply With Quote
Old 07-26-2007, 07:14 PM   #28
Senior Member
 
formul8!!'s Avatar
 
Join Date: Jan 2001
Location: www.thirdgentech.com
Posts: 1,609
Car: 2004 GTO
Engine: LS1
Transmission: T-56

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

Quote:
Originally Posted by DanniBoi91 View Post
I dont think im ever going to put ground effects on my car. Where I live I only see RS's Z28's and IROC's. So i like the sports coupe look and I think its cool.

About the steering wheel, I bought that and I like it so if you dont im sorry.

About the ignition ring, it was like tht when i bought the car.

About the exhaust, it was all new Napa stock replacement from the cat. back. I am ordering the Hooker headers and Headmen Y-pipe from Summit racing when i get my debit card in two weeks. Then she'll sound like a beast!

I also plan on buying a JET stage 2 chip probly some time next month.

And also i went down to the car junk yard and got a headliner, sunvisors, weatherstripping for the doors, drivers side front turn signal light, two front speakers, and a dome light with blue bulbs
I would keep the plain body look. Do not see too many Camaro's like that. Kinda like the Formula look, simple and mean!

If you are going to get headers, get a good catback exhaust like Flowmaster or the el cheapo NAPA exhaust is only going to choke flow.

Don't waste your money on a chip. Just up the timing and run good gas.
__________________

www.thirdgentech.com
formul8!! is offline vBGarage Page   Reply With Quote
Old 07-28-2007, 12:15 AM   #29
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

If I put a high flow cat or no cat and a Flowmaster dual chamber muffler on there would I be ok??? If not can someone please explian why!!!

Anyway since im not buying a chip im going to buy a used instrument cluster from http://www.hawksthirdgenparts.com/
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-28-2007, 12:26 AM   #30
Senior Member
 
KYLE87's Avatar
 
Join Date: Mar 2007
Location: South of Dallas, Texas
Posts: 861
Car: 1987 Chevy Camaro Sport Coupe
Engine: 305 LG4
Transmission: 700r4
Axle/Gears: 2.73's

Classifieds Rating: (2)
Re: My first car! 1987 camaro! suggestions please!

Quote:
Originally Posted by DanniBoi91 View Post
If I put a high flow cat or no cat and a Flowmaster dual chamber muffler on there would I be ok??? If not can someone please explian why!!!

Anyway since im not buying a chip im going to buy a used instrument cluster from http://www.hawksthirdgenparts.com/


I have a high flow cat and flowmaster 80's series, it sounds great and ive had no problems with it. You might be better off getting a new cluster on ebay, it will be a lot cheaper and you only really should change out the speedoeter.
__________________

1987 Sport Coupe NTTGA

Last edited by KYLE87; 08-11-2007 at 06:18 PM.
KYLE87 is offline vBGarage Page   Reply With Quote
Old 07-28-2007, 12:27 AM   #31
Junior Member
 
Digital8's Avatar
 
Join Date: Apr 2007
Location: North Carolina
Posts: 29
Car: 84 Camaro Berlinetta
Engine: 350 4-bbl
Transmission: 700R4
Axle/Gears: 3.73

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

On the exhaust system you need to check your emissions laws. Some states require you to have a cat on your car, Some states don't. If you have to have one get a High Flow Cat. I have Edelbrock headers, High Flow Cat and Flowmaster exhaust. And yeah I love the coupes with no kit also...This is mine
Attached Images
File Type: jpg 100_0105.jpg (781.5 KB, 119 views)
__________________
Digital8 is offline vBGarage Page   Reply With Quote
Old 07-30-2007, 03:46 PM   #32
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

"Because smog is a problem typically associated with large urban areas, Nebraska does not have any official policy for vehicle testing. However, it's still important for residents to do their part to protect the environment."

This is a qoute from the nebraka DMV website, is this saying i dont have to run a catalytic converter???
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 07-30-2007, 04:36 PM   #33
Senior Member
 
KYLE87's Avatar
 
Join Date: Mar 2007
Location: South of Dallas, Texas
Posts: 861
Car: 1987 Chevy Camaro Sport Coupe
Engine: 305 LG4
Transmission: 700r4
Axle/Gears: 2.73's

Classifieds Rating: (2)
Re: My first car! 1987 camaro! suggestions please!

Its not saying that you can run without one but its not saying that you cant, technically your ot supposed to but, they would never check for it
KYLE87 is offline vBGarage Page   Reply With Quote
Old 07-30-2007, 05:10 PM   #34
Supreme Member
 
85Iroc-Z's Avatar
 
Join Date: Mar 2007
Location: NE Pennsylvania
Posts: 1,327
Car: 85 Iroc-Z
Engine: 383 TPI
Transmission: TKO600
Axle/Gears: 3.73

Classifieds Rating: (1)
Re: My first car! 1987 camaro! suggestions please!

Looks nice. I would change the wheels though and put iroc wheels on.
85Iroc-Z is offline vBGarage Page   Reply With Quote
Old 08-05-2007, 12:36 PM   #35
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

Hey got a new camera and took some pics!!
I also got a new cd /radio that works!






Last edited by DanniBoi91; 08-05-2007 at 12:40 PM.
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 08-05-2007, 01:12 PM   #36
Senior Member
 
Join Date: Sep 2002
Location: Ga.
Posts: 2,078
Car: sold

Classifieds Rating: (10)
Send a message via Yahoo to ssean92
Re: My first car! 1987 camaro! suggestions please!

wheels, lower it, and get a new sterring wheel. Look like a good find
__________________
Car SOLD 04/03/2010
ssean92 is offline vBGarage Page   Reply With Quote
Old 08-06-2007, 06:35 PM   #37
Senior Member
 
Join Date: Oct 2006
Location: Pittsburgh, PA
Posts: 559
Car: 1992 Pontiac Firebird
Engine: 3.1
Transmission: 700R4
Axle/Gears: 3.42 Auburn Posi

Classifieds Rating: (1)
Send a message via AIM to noahTHEpurdy Send a message via Skype™ to noahTHEpurdy
Re: My first car! 1987 camaro! suggestions please!

Don't you dare ever think about putting ground effects on that. Gorgeous Sport coupe.
__________________
noahTHEpurdy is offline vBGarage Page   Reply With Quote
Old 08-06-2007, 07:19 PM   #38
On Probation
 
Join Date: Nov 2005
Posts: 774
Car: 2002 Formula
Engine: 5.7 LS1

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

I would proably hit back bumper with ratttle can paint job till you can get it painted. Would look better then what you got back there.
rideon1200 is offline vBGarage Page   Reply With Quote
Old 08-10-2007, 07:06 PM   #39
Junior Member
 
Camaro Spectre's Avatar
 
Join Date: May 2007
Location: North Platte, Ne
Posts: 70
Car: 91' Z28, 00' T/A
Engine: 350 HSR, Ls1
Transmission: T5, T56
Axle/Gears: 3.73, 3.42

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

Well Well, another nebraskan. Can't find many of us around .

I'm not the biggest fan of the car not having ground effects (I like mine having them) but its really up to the driver. sometimes they can be a nasty pain (high speeds & many Nebraska roads are not kind to them). From my own view--as I have a friend with an 84 that looks quite similiar--a good racing stripe compliments the car quite well.

Metallic Dark Midnight Blue is very good color for the car from what I have seen, and its not very often you see such a color. I'd avoid lighter colors or colors that you see a lot of. Maybe a few window stickers are needed....I've got the idea of when I finish the work on my car of making a window decal "Ricers Eaten #" with the number being easily removable & replaced. Or maybe replacing ***** with Mustang....god knows we see enough of them around.

But its really up to you just enjoy it and don't rush anything you always have plenty of time.
Camaro Spectre is offline vBGarage Page   Reply With Quote
Old 08-10-2007, 08:27 PM   #40
Senior Member
 
Tobias05's Avatar
 
Join Date: Jul 2003
Location: any clime or place...
Posts: 2,776
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

they have the "goodmark" steel cowl hoods on ebay right now for 299+ shipping. been highly debating one for a while now. i think they would look killer on a SC like ours.
__________________
1987 Chevrolet Camaro Sport Coupe-assorted shades of rust
13.75@102.2mph on 2.1 60'
"rust rocket"
...someday hope to install FAST EZ EFI...
1999 Chevrolet Camaro Z28-Artic White, Flame Red Cloth
Full Bolt-Ons, Tuned by Frost, Hurst Billet, Bilsteins, Zr1s
Tobias05 is offline vBGarage Page   Reply With Quote
Old 08-11-2007, 02:54 AM   #41
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

Hey guys i just recived my Hedmen heders and Y-pipe! Im still im process of putting them in so will be done shortly. Once im done ill put up a video of the new stuff.

Also im taking my car in at a Macco place pretty soon to get a estimit on a nice black piant job and dent removal.
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 08-11-2007, 11:58 AM   #42
Senior Member
 
86NiteRider's Avatar
 
Join Date: Dec 2000
Location: Somewhere around the South Side of Chicago just crusin' in one of the Niteriders
Posts: 3,217
Car: 92RS 25th Anniv./88 IROC Z28 Vert
Engine: 305 TBI w/Tpi Air / 305 TPI
Transmission: 700r4/700r4
Axle/Gears: Posi

Classifieds Rating: (10)
Send a message via AIM to 86NiteRider
Re: My first car! 1987 camaro! suggestions please!

Quote:
Originally Posted by DanniBoi91 View Post
Hey guys i just recived my Hedmen heders and Y-pipe! Im still im process of putting them in so will be done shortly. Once im done ill put up a video of the new stuff.

Also im taking my car in at a Macco place pretty soon to get a estimit on a nice black piant job and dent removal.
Are you in Omaha? I am there from time to time because my kid goes to UNO. I might stop by and see your progress. Not many SC's in Omaha. I say if you want the mean street look...no GFX. And dark paint..blue or black (which I think is the best) would look killer...
__________________

88 Camaro IROC Z28 Convertible
92 Camaro RS 25th Anniversary
2nd place Best Interior-'09 3rd Gen Fest
1st place Best Interior-'08 3rd Gen Fest
3rd place Camaro Modified-'08 3rd Gen Fest
86NiteRider is offline vBGarage Page   Reply With Quote
Old 08-11-2007, 06:09 PM   #43
Senior Member
 
KYLE87's Avatar
 
Join Date: Mar 2007
Location: South of Dallas, Texas
Posts: 861
Car: 1987 Chevy Camaro Sport Coupe
Engine: 305 LG4
Transmission: 700r4
Axle/Gears: 2.73's

Classifieds Rating: (2)
Re: My first car! 1987 camaro! suggestions please!

I just recently put a good mark cowl hood on my sport coupe, I LOVE IT, the ones on ebay arent goodmark, but I debated ordering the one you are talking about until I found a goodmark one listed locally on craigs list that was brand new for 225. The goodmark ones have the gm genuine restoration part stamp on the inside of the hoood and it says goodmark, But those are suppossed to be just as good, Mine is a goodmark 2 inh, but it measure closer to 3 and its a perfect fit, Well here are some pics












Excuse the car being so dirty, Let me know wat you think
__________________

1987 Sport Coupe NTTGA
KYLE87 is offline vBGarage Page   Reply With Quote
Old 08-11-2007, 11:05 PM   #44
Senior Member
 
MillerTime21's Avatar
 
Join Date: Jan 2004
Location: Lisle,IL
Posts: 560
Car: 94 25th TA
Engine: 355LT1
Transmission: T-56
Axle/Gears: 10bolt 3.42

Classifieds Rating: (0)
Send a message via AIM to MillerTime21
Re: My first car! 1987 camaro! suggestions please!

^^^^^ Looks good! very clean looking car
__________________
1994 Trans Am 25th Anniversary Edition
355LT1 / T-56 / 10bolt 3.42 / T-tops

http://www.cardomain.com/id/Millertime21
MillerTime21 is offline vBGarage Page   Reply With Quote
Old 08-11-2007, 11:35 PM   #45
Senior Member
 
86NiteRider's Avatar
 
Join Date: Dec 2000
Location: Somewhere around the South Side of Chicago just crusin' in one of the Niteriders
Posts: 3,217
Car: 92RS 25th Anniv./88 IROC Z28 Vert
Engine: 305 TBI w/Tpi Air / 305 TPI
Transmission: 700r4/700r4
Axle/Gears: Posi

Classifieds Rating: (10)
Send a message via AIM to 86NiteRider
Re: My first car! 1987 camaro! suggestions please!

Camaropunk is right...raise the hood with a cowl and fatten the tires with some different rims...I can't wait to pickup my 86 coupe from the paint shop...I am going to put my IROC rims on and it will look great, especially because of the no ground effects...
__________________

88 Camaro IROC Z28 Convertible
92 Camaro RS 25th Anniversary
2nd place Best Interior-'09 3rd Gen Fest
1st place Best Interior-'08 3rd Gen Fest
3rd place Camaro Modified-'08 3rd Gen Fest
86NiteRider is offline vBGarage Page   Reply With Quote
Old 08-12-2007, 12:07 AM   #46
Senior Member
 
Tobias05's Avatar
 
Join Date: Jul 2003
Location: any clime or place...
Posts: 2,776
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen

Classifieds Rating: (0)
Re: My first car! 1987 camaro! suggestions please!

camaropunk you just sold me on getting one of those hoods, that thing looks awesome! i knew it'd look good, but seeing a pic, wow.
__________________
1987 Chevrolet Camaro Sport Coupe-assorted shades of rust
13.75@102.2mph on 2.1 60'
"rust rocket"
...someday hope to install FAST EZ EFI...
1999 Chevrolet Camaro Z28-Artic White, Flame Red Cloth
Full Bolt-Ons, Tuned by Frost, Hurst Billet, Bilsteins, Zr1s
Tobias05 is offline vBGarage Page   Reply With Quote
Old 08-12-2007, 02:29 AM   #47
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

CamaroPunk Nice Car!!!!! I would love to get a two inch cowl hood!

The headers and Y-Pipe are in!
Pics soon.

Last edited by DanniBoi91; 08-13-2007 at 07:55 PM.
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 08-12-2007, 02:39 AM   #48
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

;}

Last edited by DanniBoi91; 08-13-2007 at 07:54 PM.
DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 08-12-2007, 08:06 PM   #49
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

I found a used cowl hood for sale on Craigslist.org! Its selling for $275. I really want to get it but i have to convince my dad to take me and get it. Here are the pics from the seller.


DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 08-12-2007, 08:21 PM   #50
Junior Member
 
DanniBoi91's Avatar
 
Join Date: May 2007
Location: Omaha NE
Posts: 11
Car: 1987 Camaro SC
Engine: 355 V8
Transmission: TH350
Axle/Gears: Stock peg leg (for now)

Classifieds Rating: (0)
Send a message via AIM to DanniBoi91
Re: My first car! 1987 camaro! suggestions please!

Headers and Y-Pipe!




DanniBoi91 is offline vBGarage Page   Reply With Quote
Old 08-12-2007, 08:21 PM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Auto Detailing and Appearance > Members Camaros

Tags
1987, 91, camaro, carborated, craigslist, craigslistorg, crate, engine, generation, gmpp, goodmark, hood, nj, pics, urban
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 02:04 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.5.2
All content copyright © 1997 - 2012 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details