BlackMamba

iTrader: (6)

Hello to Everyone in TGO.
I have this 84 Camaro that i got for my 17 birthday from my father. When i got the car it was a wreck to me. Some parts of the camaro had shiny paint and other parts it had faited or cracked paint. When i got a job i was able to get my camaro new tires and a so so paint job. Over time i started doing some things to it to improve my camaro looks. Recently i have all my windows tinted and i think it looks okay.
What do you guys think?
Also i am planning of finishing my car of completely entering next year 2010
And the VW Bug in the shot next to my camaro is a project i am also working on.

BlackMamba

iTrader: (6)

Some more picture and a before picuture

PowerHour84

look great!

Did you swap the fascia from a later Camaro?

!CamaroDave

iTrader: (3)

Car looks real clean! Nice job.

BlackMamba

iTrader: (6)

Hey guys
Thanks for the comments.
And yeah I got the front bumper from a 92 camaro that I use to have. I am trying to give my camaro a 92 look like my first car I had and hopefully finish it for next year.

MrPhotographer0

well i like it.. considering its EXACTLY how i want mine to look, down to the right wheels.. and its an 84 too..hahaha

Confuzed1

iTrader: (4)

Well, if you didn't want it to look like an '84 Camaro - then it looks great. Nice '92 you have there.

Paragus77

I wish my IROC looked that good. Just lose the IROC-Z sticker on the rear window, and you have a very nice looking 'maro indeed!

BlackMamba

iTrader: (6)

Thanks Guys for the comments. I wish i could of post bigger picture like others do but dont know how to.
Right now i am thinking of removing the white paint from the wheel and leaving them gray. Also was thinking of painting them factory style black but someone told me that it wont work at all.
By april of 2010 i will have enough to replace the 305 to a 350 again and replace the trans for a newly rebuild one and others things as well.
I will post a forum of my progress of the engine work later on when i will have the work done so others can see.
Also on the iroc sticker it was given to me by a friend, she thought it would make others think i have a Iroc
Will be updating as soon as i can

1Aauto

Looks pretty cool.

BlackMamba

iTrader: (6)

Here is a picture i took of my car after i gave it a wash and a wx from the turtle wax ice. it make the car stand out even more. Also took a picture of it with the car cover since they say it mite rain here in Cali, also what to keep it clean
Also yeah my camaro is higher in the front, when i had the stock coil i alway hit the spoiler. Now with it higher it doesnt
Hope you enjoy the pictures

facyn

I want to make my 84 Camaro Z28 handle on the track and launch at the 1/4 mile and my plan is to get,

• Rear Control Arms
• Panhard Bar
• Strut Tower Brace
• Subframe Connectors
• Sway Bars
• Torque Arm
• Shocks
• Springs
• Complete polyurethane bushing kit


But the problem I’m having is deciding on what manufactures/companies to use, and I don’t what the Camaro to sit much lower than the stock height
Can any one help?
__________________
Dont let tears fall in my eyes
Devis mutuelle familiale des cheminots fr |Devis mutuelle familial vauban

BlackMamba

iTrader: (6)

You may wanna go to the suspenion forum area
Here is the link to it hopefully someone can help you there

https://www.thirdgen.org/forums/suspension-chassis/

I hope it work, there is only so much you can do with a phone with internet connection

itsMikey

nice ride!! real clean

MitchellDeMoor

Nice car also love the bug as I am a big time VW guy. I think you should either get a '91/'92 bumper and side vailances or get rid of the '91/'92 front bumper because the lower vailance looks out of place but thats just me. Otherwise I love the paint, wheels, stance, etc. Looks really good.

BlackMamba

iTrader: (6)

Yeah Thanks if fact i first started driving in a VW Bug. I wasnt easy but i was able to learn.
I know this is not a thirdgen camaro but he is a picture of my bug that i am currently working on. My friend and i are gonna strip it and paint it flat black. Hopefully it works to our favor we notice today a few rust spots.
It is kinda fun starting the engine in my bug and waking up the whole block as it is warming up

BlackMamba

iTrader: (6)

Here are a few things i been doing to my camaro over these few days.

we reomve the whole rear carpet to find out that i had rust in my trunk. i had some help some a few friends, we were able to remove the rust. my freind spray some things that made it seen like nothing happen which was preety cool, and no it was not paint (dont want to sound bad)

i was able to buy a 145mhp speedo from a fellow member here on TGO. i am thinking of having it install by the end of this weekend. i just dont like the dummy lights anymore and plus my current speedo go to only 85mph. it is time to upgrade to 145

here is a picture of the speedo and also a picture of my friends camaros
the green camaro on the left is a 89 iroc that we are working on. my friend is repainting the whole front end to make it look alittle better. the middle one is a 89 RS that we just bought about a month ago. we were able to get it for $1150 which was not bad, so we think. then my camaro is on the right side. all of our cars are V8 power
i will post more info on my friends car currently they dont have internet
i will be updating later on the progress on our cars

YoungDriver

Wow, nice restore. looks a litle better off than mine did when i got it last year. me and my dad got it running and in emissions order just last week after having to replace the engine. hope mine looks as nice as yours someday...

BlackMamba

iTrader: (6)

Thanks for the comment.
Here are a few update that i have done. i got the 145mph speedo install by a fellow member z28 TPI (Ryan) who did a great job on the swap. All the gauges work perfect without any problem.
Also maybe by today i mite get my 3in cat back pipe with an exhuast cut out.
Also i would like to thank I_R_O_C_Z_2_8 for the gauge that i bough from him
Here a a few pictures.

BlackMamba

iTrader: (6)

Some more picture

BlackMamba

iTrader: (6)

Here is a few updates
Currently my camaro is not working at this time. It has a knocking noise that my dad says that is time to replace the engine and also the trans
I was thinking of going LS but since i dont know that much i will be staying with the 350.
More updates in the future

BlackMamba

iTrader: (6)

Helo Everyone
Here are a few updates on my camaro that i have done
I have not had time to work on my camaro due to the werid weather here in cali so i have to wait.
Also i was about to get a few things from a fellow member
1. a 350 Long Block that he was selling. I didnt expected to get it it just happen. I talked with a fellow friend of mine to rebuild it and he will do the work for me. So by the time he will install it it will be ready just to install and run.
2. I got a T5 convertion that my father got me. I was thinking of staying with auto but he doesnt want me to worry anymore about the trannny leaking due to a bad seal (he gets angry at that). I will be putting in the T5 when i do the engine swap.
3. And finally i got a set of Edelbrock TES headers with Y pipe, they are ceramic coated. I got them use but they were never on a running car.
I cant wait to see how everything turns out.
More updates to come
Here is a pic of the 350
more picture to come
Thanks

kroc84

sweet ride man, good luck with the build may it move swiftly as humanly any financially possible lol we are in the same boat basically

BlackMamba

iTrader: (6)

Thanks bro. I though i didnt had enough to even buy some new parts for my 350 but i got call to work again and now i can get some money to fix up my camaro
As soon as i have some updates i will let you know

BlackMamba

iTrader: (6)

Okay i know it has been a long time i have posted anything that has been happening to my camaro
So here are some thing
1. exhaust cutout for the track but somethimes open it here at home to hear it
2.2 1/2 in cat back exhaut pipe
3.BMR lower control arms

I will be replacing all my rear suspension later on after i do my engine swap that way i know how much money i got left in the bank
here are some picture.
Also i was able to put in a underbody coating to help my camaro from the rust and make it look alittle better

BlackMamba

iTrader: (6)

Okay guys tomorrow hopefully i will install my panhard bar and finish putting on the undercoating to my chassis to make it look better.
I will have picture as soon as i finish