Another Project Form..my 1987 GTA
#1
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Another Project Form..my 1987 GTA
This is my 1987 GTA T/A story. I got it when I was 14..did a small resto on it and drove it. Well the car has set since last November with out the engine. The car started out as my DD in high school. TPI 350 with the 700R4. My senior year my dad and I put a little bit of nitrous on it. Car when high 12s on the a 100 shot. Well last Nov. I raced an 03 Cobra..mid to low 11s car. Change the jets out..and that was the last night she ran..And no I didnt beat him..had him till the 1000ft..then pop! Since then Iv striped the car down, put a cage in it, and the car is sitting in primer. Boyds Racing in Oklahoma build my engine. 350 .40 over. Eagle stroker kit. SPS Pistons Comp Cams .630 lift/ 262 dur. cam. Brodix heads, Wiend High rise and a Demon 750. Ohh can cant forget about my Moroso 7qt. Oil Pan that adds like 500 horse to the TIRE. lol.. Tranny...havent got that far but Im going to use Promforma Build Stage 3 700R4. Take a look at my cardomain site to get a better look at the old junker..lol I cant post more than 3 pics at a time...
#2
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
More pics of body work
#3
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
The car as it sits..Thursday Night I got it in primer..Nothings changed sice the pics...adn the last one..is the first day I drove the car...
#5
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
lookin good so far man, Ill bet that stroked motor will have a little more get up n go then that L98!
#6
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
umm yeah Ill have more nitrous hp than that thing could ever put out lol. Im going back factory bright red with a semi gloss blackengine bay. All engine stuff will be red and gold to match the car..
#7
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Here is a few more pics..Seats I got for $100, Really nice set of orignals..came out of another 87 with like 40,000 miles. Then the cage being worked on
Trending Topics
#8
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
what does everyone think of the 4th gen wings? Im looking for more pics to get an idea..can someone help me out? Thanks!!
#9
Member
Join Date: Oct 2007
Location: Highland Heights, KY
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro coupe
Engine: 350
Transmission: 700R4
Axle/Gears: 3.23
Re: Another Project Form..my 1987 GTA
#10
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
honestly, I wish I went with the 4th gen wing, I always thought it looked too big but I saw a pic that changed my mind, wish I could find that pic though, so one vote here for the 4th gen wing! btw dont pay for the one that hawks sells, just buy a stock 4th gen one like stephen did.
#11
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Moneys not an issue..I dont have any kids..cheap rent/not many bills..and I got a good job out of high school..so thats why Im restoring it again before I have kids and ****..Find some pics for me I want to see the 4th gen wings!!! I like how stephens looks...They seem to look a little better than the aftermarket ones..
#12
Member
Join Date: Oct 2007
Location: Highland Heights, KY
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro coupe
Engine: 350
Transmission: 700R4
Axle/Gears: 3.23
Re: Another Project Form..my 1987 GTA
was the one i put from hawksthirdgen not the one your looking for.....
#14
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Oh its good but I want to see more..Im wanting to go with the ra hood and 4th gen wing with the stock GTA Wheels and follow the stripes on the decklid and spoiler..Im not repainting hte hood but everything else..its getin new red..
#15
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
I got everything to finish the engine today..Im painting the block Base Clear Red(same color as the car) and the valve covers same..I dont know what to do with my Brodix heads..I tryed to polish the ends of them..were the acc. bolt on..and I dont like that look..So I need to paint them or do soemthing..I need some Ideas!!!
#16
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Here is some pics of what Iv been up to this week. Painted the block and heads. I didnt know what to do with them so I went with a silver that I had painted a buddys lemans in..looks good. Just cleared the intake..I think I should have done a semi gloss but everyone else loves it..This well make it soo easy to clean...but I just set everything on tosee what its going to look like..Tell me what you think..
#17
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Here is what it looks like..right now!
#18
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Here is the moroso oil pan..Sealed..based..sickered and then Cleared..I didnt have a pic right after I cleared it until I put in on the engine..but you get the idea..IT was a GOD UGLY GAY Orange..idk waht it was..just eww
#19
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Here is my valve covers in primer..I should have them done this weekend..Then my heads..The one on the left...is polished..I couldnt get it to look right..so I took a DA Sander to them and then painted them silver..
#20
Member
Join Date: Oct 2007
Location: Highland Heights, KY
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro coupe
Engine: 350
Transmission: 700R4
Axle/Gears: 3.23
Re: Another Project Form..my 1987 GTA
lookin great. I think your crank fell out of are you not using one....lol.
But keep up the work. How is your time frame looking.
But keep up the work. How is your time frame looking.
#21
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Oh man its a new thing..crankless small blocks..no thats jus the mock up of what its ganna look like. I would like to see it running and drivable spring early summer..if funds keep coming in..I dont want to rush it..I want it done right and in 10 yrs..look as good as it did the day I finished..
This is just my dad and I..Im painting it all hes just helping me put it together..not bad for a 19yr old..
This is just my dad and I..Im painting it all hes just helping me put it together..not bad for a 19yr old..
#23
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Wont fit..intake is too tall...
#24
Senior Member
iTrader: (1)
Join Date: Feb 2007
Location: mesa AZ stapley & 60
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 RS, 87 IROC, 89 GTA
Engine: LO3, LB9, L98
Transmission: 700R4 X3
Axle/Gears: 2.70, 3.30, 3.27
Re: Another Project Form..my 1987 GTA
if you cant say something nice, or remotly intellegent...bah, nvm. Anyways, GTA is looking sweet, wish i had money to throw into mine. I need a new motor :/
#25
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Hey thanks man..Just keep puting a little money back here and there..I sold a lot of my old parts to pay for this turd lol..Doin it all on a 19yr olds income..
#27
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Yeah your bird looks sick with that hood too..I wihs I had t-tops like you..but for racing..it might not be a good idea.. lol
#28
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
yea we'll see how well the ttops hold up to racing, I might be buying a 350 thats already built and makes around 350hp but I'd have to switch to carb which Im not sure I want to do unless I get another driver car.
#29
Senior Member
iTrader: (8)
Join Date: Feb 2008
Location: Lowell, Michigan
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: Another Project Form..my 1987 GTA
Im 19 and dont nearly have the amount of cash you do and i work as a mechanic at a GM dealership hahaha... BUT i also have a girlfriend with exspensive tastes hahaha.. Looks great dude, im in the process of tearing my TA down n rebuilding it. Keep up the good work!
#30
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
My girl is $$ too...But shes bought me a lot of stuff for the turd in the last 2yrs..The car is how I met here..lol one day at school..and the rest in history..For christmas Im geting my autometer gauges to make my dash so Im excited for that..anybodys needs any parts Iv got some stuff still layin around..
#31
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
#32
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
#33
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Today I woke up and thought Id spray my engine bay..I went with a single stage black with flatner in it..
cant wait to get my new kmember and engine in it!!!
cant wait to get my new kmember and engine in it!!!
#34
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
lookin great so far man! are you doing the spraying again on the exterior?
#35
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Yeah Im doing it Wed. of this coming week. I wanted to do it in a booth..not at my parents. They never have had a prob with me doin it but I just would like to do it in a booth..
So check back wed or thurs..Ill have pics up!
So check back wed or thurs..Ill have pics up!
#36
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
will do, good luck with the spraying! and then any idea when the engines going in?
#37
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
No not really.. I would like to get it in as soon as my k-membber gets here
#38
Member
Join Date: Jun 2008
Location: Chattanooga TN
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 GTA
Engine: 350 Tune port
Transmission: 700r4,2500 stall
Re: Another Project Form..my 1987 GTA
Sweet build man looks real good, what kind of k member u going with?
#39
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Another Project Form..my 1987 GTA
Apparently...I was called out on the first page, in regards to the OEM 4th gen wing.
Yes...$100 for a used OEM & a little extra work is way better than a $400 direct fit Hawks wing, IMHO.
We now have 3 'birds locally with OEM wings, no high $ aftermarket ones.
Check out my Photobucket for pics of mine & a red 91 TA with an OEM wing.
Yes...$100 for a used OEM & a little extra work is way better than a $400 direct fit Hawks wing, IMHO.
We now have 3 'birds locally with OEM wings, no high $ aftermarket ones.
Check out my Photobucket for pics of mine & a red 91 TA with an OEM wing.
Last edited by Stephen; 11-10-2008 at 12:06 PM.
#40
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Hey stephen..Im thinking Im ganna steal one off my buddys LT car lol..When I decide if Im buying one from hawks or geting an OEM one..Ill PM you about how to make the OEM fit..
Ohh and I almost forgot..NOT
I painted the car yesterday and here are soem pics!!!!
Ohh and I almost forgot..NOT
I painted the car yesterday and here are soem pics!!!!
#41
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
I sprayed it at my high school were I graduated. The teacher was really happy to let me do it adn show the kids a thing or two.. and he said I did a great job of layn it down..I was like duh..were do you think I learned it..lol I still need to take the rear wheels off and finish undercoating it but even before wet sanding and buffing it looks like glass..cant wait till after its buffed!!
#42
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Another Project Form..my 1987 GTA
But...Get one from a LT-generation 4th gen, not from a LS-generation. As much as they LOOK the same, they apparently aren't. Our LT-gen wings are sitting flat, but look at my Photobucket pics. My LS-gen is sitting "croooked". Only touching on one corner. I'm gonna hunt a LT-gen wing & replace my LS-gen....
#43
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
looks great man, now get her back together so she looks like a car again! haha
#44
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
We are a lot closter to being ready to put the motor in the car. I woke up today and thought..I dont like the flat black engine bay..so I sanded and this after noon it ended up being base/clear black with red flake..Looks so bad ***. Ill get some pics up as soon as I can
#45
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
Here is a a few things Iv done. I got new weather stripping from my girlfriend for xmas so now its time to get the doors adn hatch back on. My mom doesnt like the engine bay..I think it will look awsome with the engine in it. You wont see it unless its really sunny day out..I need input whats everyone think so far? You might ask why spend the time and money to make the engine bay nice and the car back factory red..well all my money is in the drivetrain..so thats why!
#47
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
CHANGED THE COLOR OF MY CAR..lol I just painted the cage again..and will start on the door jams. Im doing a color a lot like the Sunset Metallic Orange on the WS6s..Vetts... its metallic so I want to do the jams and REasemble the car and do the all in one big turd..IDK..totally random..asked my g/f and she said yes..and that was enough for me( we almost bought a SOM 01 WS6 and thats why I want it )..so I pretty much just waisted $500-600 on red paints lol..then doing a dark grey stripes on the hood..
#48
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
CHANGED THE COLOR OF MY CAR..lol I just painted the cage again..and will start on the door jams. Im doing a color a lot like the Sunset Metallic Orange on the WS6s..Vetts... its metallic so I want to do the jams and REasemble the car and do the all in one big turd..IDK..totally random..asked my g/f and she said yes..and that was enough for me( we almost bought a SOM 01 WS6 and thats why I want it )..so I pretty much just waisted $500-600 on red paints lol..then doing a dark grey stripes on the hood..
haha but seriously thats a nice color, my teacher did his truck in it, it hid body work flaws well and looked great.
#49
Member
Thread Starter
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: Another Project Form..my 1987 GTA
I wanted to do something different..its been red forever and with red and gold..I was really limited on what I could do..wheels anything really..soits going to be SOM with a dark grey stripes on the hood,wing and deck lid..plus man your car looks damn close to mine..we cant have two of the same lol..if I miss the red..Ill come steal yours
#50
Supreme Member
iTrader: (3)
Join Date: Dec 2006
Location: Guilford, Connecticut
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: Another Project Form..my 1987 GTA
haha you can steal mine, under one condition, I get your car and Im taking your engine with it!