fuel to feed 383 TPI
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: nw indiana
Posts: 62
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: 383-Carb
Transmission: TH400/3500 Stall
Axle/Gears: 3.73
fuel to feed 383 TPI
Building a 383.have 180 SHP Dart heads.TPIS Mini Ram 2.xfi 280 comp cam.11.1 comp.! Thinking I need 30 lb injectors & 52 mm tb? I know fuel pump will have to be upgraded. Any suggestions?
#4
Moderator
Join Date: Feb 2000
Location: Schererville , IN
Posts: 7,015
Likes: 0
Received 1 Like
on
1 Post
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Re: fuel to feed 383 TPI
30# will be more than enough unless you really plan on spinning it to the moon.
#5
Supreme Member
iTrader: (15)
Re: fuel to feed 383 TPI
You can keep the 180 heads but you would have to get a smaller duration camshaft. The 195/200 heads would be great with the 280XFI, I ran that last year. If you use the 210 heads you will want a larger cam, those heads will need to peak higher than the 280 cam allows for. I think it's the 294XFI cam, it would work well. 30 pound injectors will be fine.
#6
Supreme Member
iTrader: (5)
Re: fuel to feed 383 TPI
Yes, was going to mention that the cam is a mis-match for the heads. Its like running a CC306 cam on a stock LT1. You can do it, but the low end is soggy, due to the overlap and there isn't much top end because the heads choke the cam.
It'll work, and plenty of people do it. But its not optimal. To feed a 383 you really need more head.
It'll work, and plenty of people do it. But its not optimal. To feed a 383 you really need more head.
#7
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: nw indiana
Posts: 62
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: 383-Carb
Transmission: TH400/3500 Stall
Axle/Gears: 3.73
Re: fuel to feed 383 TPI
Thanks Guys! Eng is still on stand till spring, so I have time to make changes.also rear end, trans,& converter will be upgraded.
Thread
Thread Starter
Forum
Replies
Last Post
beachrodder
Tech / General Engine
7
08-25-2015 08:05 AM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM