NEW BBS turbo kit
#1
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
NEW BBS turbo kit
NEW BBS turbo kit, still in boxes and never installed. Turbonetics single T62-1 with .96 AR turbine and ceramic coated housing and header. Downpipe has fittings for 2 oxygen sensors and pyrometer temp gauge. Includes K&N air filter. Designed for Power Accessories with the Multiple "V" Belt/Pulley System and Operating A/C or the Serpentine Belt/Pulley System and A/C Delete. You can also swap to 85-87 brackets and keep the AC.
Here's the link: http://www.bbsdesigns.net/cgi-local...a8b6+1113802983
email kken0@yahoo.com
Here's the link: http://www.bbsdesigns.net/cgi-local...a8b6+1113802983
email kken0@yahoo.com
Last edited by BLOWN85/TA; 04-26-2005 at 09:59 PM.
#3
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Yes it's the COMPLETE kit not the partial, not one item removed. $2500, still in the boxes, never mounted. Dont get much newer than that. He gets $3350 for this kit now BEFORE ceramic coating the turbo header and turbine housing. This unit has the Turbonetics evolution wastegate, nice piece.
#5
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Yeah it's a single. Here's the link http://www.bbsdesigns.net/cgi-local/...8b6+1113802983
#7
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
I found a TTA I wanted worse than the TA I have, no other reason. The V8 I have would make much more power with far less boost, I've just been wanting a TTA. The kit is really made very well, wont dissapoint.
Last edited by BLOWN85/TA; 04-18-2005 at 12:36 AM.
Trending Topics
#10
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Ok here's a severely reduced pic of almost everything I recieved from BBS plus the air filter out of boxes and unwrapped. I forgot the oil line and return line equipment in the bottom of another box so it did not make the pic. My wife thanks you all for the mess in the utitlity room.
Last edited by BLOWN85/TA; 04-22-2005 at 11:07 AM.
#12
Junior Member
Join Date: Dec 2004
Location: Pflugerville, TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 GTA
Engine: 5.7
Transmission: automatic
You said it's a pic of almost every thing, whats missing? Hope this isn't a stupid question, since I have only delt with a supercharger I have to ask. Does it come with an intercooler?
#13
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Like I said oil feed and return lines and fittings, I post a pic of them to today or Monday. It's plumped to the intake for a TPI, your call on wether it would fit a carb, at least you would need a carb hat and a mandrel bend or two. No intercooler was ever included with the BBS kit and I dont have an extra. eBay has them for about $200 that fit our car.
#14
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Ok here is the oil return hose and wastegate pipe I found while putting the Turbo back in it's box. If you run up to 6 PSI boost BBS claims you no mods for fuel or the ECM, I've seen Paxton do basically the same to.
I went back and checked the original pics and their is no oil FEED hose included with this kit, he does not sell it with it. Easily made or purchased and the only thing I can see that you will need.
I went back and checked the original pics and their is no oil FEED hose included with this kit, he does not sell it with it. Easily made or purchased and the only thing I can see that you will need.
#15
Member
Thread Starter
iTrader: (2)
Join Date: Apr 2001
Location: IL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
This kit sells for: $3,355.00, then add $100 for ceramic coating the Turbine housing and $180 for ceramic coating the turbo header then $450 for blowoff valve and intake piping. That's $4085 for the SAME kit from the site plus a long wait. $2500 + shipping is a steal.
#18
Supreme Member
iTrader: (1)
Join Date: Mar 2003
Location: north plainfield, nj
Posts: 2,177
Likes: 0
Received 0 Likes
on
0 Posts
Car: 05' GTO
Engine: 6.0L
Transmission: A4
damn that kit looks great, im gettin very close to payin off my kit, same condition as yours. anyone lookin for a kit like this $2500 is a steal.
#19
Supreme Member
Join Date: Jan 2003
Location: Ontario, Canada
Posts: 1,931
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 IROC-Z
Engine: 5.7L EFI LTR setup
Transmission: T-5 World Class
Well I am very interested. I am the guy who shot you an email from Canada. After we work out the shipping stuff.....that pupppy is mine !
#21
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Not that this will help but where in canada.
A buddy and I always meet a fellow canadian in the Buffalo,Ny area to give him parts. This way we dont have to ship accross the boarder for him.
Can always arrange to get the turbo kit for you and meet you somewhere also......
Im in Ohio BTW.
A buddy and I always meet a fellow canadian in the Buffalo,Ny area to give him parts. This way we dont have to ship accross the boarder for him.
Can always arrange to get the turbo kit for you and meet you somewhere also......
Im in Ohio BTW.
#23
Supreme Member
Join Date: Jan 2003
Location: Ontario, Canada
Posts: 1,931
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 IROC-Z
Engine: 5.7L EFI LTR setup
Transmission: T-5 World Class
The funds are being transfered as we speak ( to my account ) I look forward to putting them in yours ( possibly a day or two )
WOOOOOHOOOO I am gonna be one hell of a fast ride now !!!!!!!!!!!
WOOOOOHOOOO I am gonna be one hell of a fast ride now !!!!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
1
01-15-2016 06:26 AM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM