parting racecar! Lot's of parts!!!
12-21-2005, 04:35 PM
#1
Member
Thread Starter
parting racecar! Lot's of parts!!!
Selling this stuff for a friend so please no pm's. Email cmcelwrath@ioes.org. For all prices and sales.
Ok up for sale is a T-56 Transmission with Spec stage 2 clutch, pro 5.0 shifter and stock master cyl.
Spohn T-56 conversion crossmember with adjustable solid front mount torque arm.
trans and associated parts can be sold as package deal if interested.
Wilwood front 13" 6 piston caliper brakes with Baer eradispeed rotors. These are sold with spindles already machined to 1LE spec and stainless braided lines to make this complete bolt on.
Willwood 12" 4 piston rear brakes. The mounting bracket has already been machined to make these complete bolt on for 9 bolt rear end.
Brakes have only had 3 20 minute sessions on them and the pads rotors are in good condition.
Aluminum 3rd gen driveshaft with new hd joints.
Spohn LS1 conversion motor mounts.
Spohn front and rear sway bars.
Spohn Front caster camber plates.
'84 Z28 roller, NASA American Iron car (white with blue pearlcoat)
1LE hood
bolt in cage NASA certified
1LE bumper supports
'98 LS1 steel gas tank installed (also have tpi tank if interested).
9 bolt rear end
two sets of wheels with Kuhmo victoracer spec tires,
Autometer guages
manual brake balance controller
B&G drop spings rear
Koni yellow adjustable shocks front and rear
Add motor trans and wiring and go road racing.
Ok up for sale is a T-56 Transmission with Spec stage 2 clutch, pro 5.0 shifter and stock master cyl.
Spohn T-56 conversion crossmember with adjustable solid front mount torque arm.
trans and associated parts can be sold as package deal if interested.
Wilwood front 13" 6 piston caliper brakes with Baer eradispeed rotors. These are sold with spindles already machined to 1LE spec and stainless braided lines to make this complete bolt on.
Willwood 12" 4 piston rear brakes. The mounting bracket has already been machined to make these complete bolt on for 9 bolt rear end.
Brakes have only had 3 20 minute sessions on them and the pads rotors are in good condition.
Aluminum 3rd gen driveshaft with new hd joints.
Spohn LS1 conversion motor mounts.
Spohn front and rear sway bars.
Spohn Front caster camber plates.
'84 Z28 roller, NASA American Iron car (white with blue pearlcoat)
1LE hood
bolt in cage NASA certified
1LE bumper supports
'98 LS1 steel gas tank installed (also have tpi tank if interested).
9 bolt rear end
two sets of wheels with Kuhmo victoracer spec tires,
Autometer guages
manual brake balance controller
B&G drop spings rear
Koni yellow adjustable shocks front and rear
Add motor trans and wiring and go road racing.
Last edited by Anti-Venom; 12-21-2005 at 05:18 PM.
12-21-2005, 05:57 PM
#2
Junior Member
Join Date: Jun 2004
Location: Poland / Warsaw
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro RS 1989
Engine: 383 Holley 950 TBI
Transmission: TK0-600
Axle/Gears: BW
Hi,
How much this one with shipping to Chicago
"Willwood 12" 4 piston rear brakes..."
"Autometer guages"
How much this one with shipping to Chicago
"Willwood 12" 4 piston rear brakes..."
"Autometer guages"
Trending Topics
12-22-2005, 03:09 PM
#12
Member
Thread Starter
All these parts are like brand new and have only had limited use and have only been on car for a year, stored inside.
Available for pickup in Springfield IL
Parts are still on car so please be patient as they are going to be pulled off asap.
Transmission with pro 5.0 shifter, clutch and hydraulics are $1250.00 prefer not to ship He is willing to deliver as far as indy, chicago, or st louis for reasonable compensation. this does have LS1 bellhousing.
Spohn T-56 conversion crossmember with solid front mount torque arm also prefer not to ship due to size. he wants $300.00
Spohn LS1 conversion mounts are 50.00 shipped to lower 48 states.
Spohn caster camber plates are 100.00 shipped to lower 48
Koni yellows all 4 f&R 425.00 shipped to lower 48 states.
Rear willwoods $450.00 shipped to lower 48.
front willwoods with spindles, $1050.00 prefer pickup
You can reach the seller on his cell at 217-416-1136 to make arrangments for paypal shipping or pickup arrangments.
Available for pickup in Springfield IL
Parts are still on car so please be patient as they are going to be pulled off asap.
Transmission with pro 5.0 shifter, clutch and hydraulics are $1250.00 prefer not to ship He is willing to deliver as far as indy, chicago, or st louis for reasonable compensation. this does have LS1 bellhousing.
Spohn T-56 conversion crossmember with solid front mount torque arm also prefer not to ship due to size. he wants $300.00
Spohn LS1 conversion mounts are 50.00 shipped to lower 48 states.
Spohn caster camber plates are 100.00 shipped to lower 48
Koni yellows all 4 f&R 425.00 shipped to lower 48 states.
Rear willwoods $450.00 shipped to lower 48.
front willwoods with spindles, $1050.00 prefer pickup
You can reach the seller on his cell at 217-416-1136 to make arrangments for paypal shipping or pickup arrangments.
Last edited by Anti-Venom; 12-22-2005 at 03:12 PM.
12-22-2005, 03:17 PM
#13
Member
Thread Starter
If anyone wants to snag this entire car turnkey and ready to go with all available parts for $10.500 speak up quick! Parts will start flying off it here real shortly. We would realy like to sell it as a whole.
Car can be seen at www.hpfactoryltd.com click sponsored rides.
also at www.ironwolfracing.com
Car can be seen at www.hpfactoryltd.com click sponsored rides.
also at www.ironwolfracing.com
12-22-2005, 03:23 PM
#14
Member
Thread Starter
Correction
there is no spohn swaybars. i thought they where purchased and installed but it has been brought to my knowlege that the car has stock ws6 bars under it. sorry for any inconvenience.
there is no spohn swaybars. i thought they where purchased and installed but it has been brought to my knowlege that the car has stock ws6 bars under it. sorry for any inconvenience.
12-22-2005, 05:29 PM
#15
Originally posted by Anti-Venom
Transmission with pro 5.0 shifter, clutch and hydraulics are $1250.00 prefer not to ship He is willing to deliver as far as indy, chicago, or st louis for reasonable compensation. this does have LS1 bellhousing.
Transmission with pro 5.0 shifter, clutch and hydraulics are $1250.00 prefer not to ship He is willing to deliver as far as indy, chicago, or st louis for reasonable compensation. this does have LS1 bellhousing.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM