parts for sale, cheap, with pics.
01-31-2006, 04:02 PM
#1
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
parts for sale, cheap, with pics.
anything highlighted in yellow has been sold!
ok, im doing a little house cleaning of all the parts ive collected over years.
buyer pays all shipping.. if you have some good parts for trade, PM me.. if you want to offer a different price, PM me...
some of these parts are just tiny things.. i know they're not quite worth the $10 im asking for them, but buy something else, and i'll toss it in
the box free... when you consider i have to find a box, pack it, and goto the post office on my lunchbreak, $10 is the min id go thru that
effort for... obviously if you want several small things, i'll charge ya alot less... once more PM me. consider everything OBO and PM me your
best offer.
if you look at these pics, and get the idea of the kind of parts i have, and you want something not here, PM me. i have random parts from
my old 82 camaro, a whole 91 parts car, and misc camaro parts ive gathered over the last 8 years. i dont have any firebird parts, other then
the universal stuff shared with the camaro.
anything highlighted in yellow has been sold!
all that said, here are the parts.
ok, starting with some basic stuff:
Sunpro mechanical gauges. temp, oil and voltage.. looks good in 3rdgens IMO... oil gauge comes with copper line instead of that nylon
crap.. - $50 (remember, obo on everything...) pic:
Mallory fuel pressure regulator... if you're swapping to a carb, this is the regulator you need. bearly used.. it was only used for 2,000 miles by
me. - $35
small cap computer controlled HEI distributor.. from my 91 camaro. works great. no slop, no sludge. - $35
large cap stand alone HEI... what you need if swapping to a carb. - $35
brand new ACCEL cap and rotor.. for the stand alone HEI above.. brass terminals... - $20
single plane intake... hurricane or something like that.. no damage. bearly used. perfect for that carb swap, or TBI (with a adapter). yes, it
bearly clears the camaro hood.. fits all SBCs except vortec. - $70
red drop base aircleaner... its been "massaged" by a hammer to clear my TBI.. and then was massaged more to clear a holley with a large TV bracket.. - $10
ok, some cheap stuff. REMEMBER.. everything is OBO.. some of this stuff, i have no idea of its value, so i just guessed high. make a offer. $10
in my pocket and more storage space is worth more to me then not selling some of this stuff.
700R4 crossmember. -$20
stock panhard rod, not tweaked. maybe 4thgen. - $20
stock LCAs, not tweaked. maybe 4thgen. - $20
ORB OF POWER!!! aka, vacuum ball. some people crack theirs... this one is like new. except it has dust. $10
oil cooler... complete with sandwitch adapter pictured below... $50
triangle braces... not all of the camaros got them.. if you're for handling and dont have them, heres your chance to get some.. $20
washer fluid tank... would be almost white if cleaned.. i also have a second one(not pictured) that is totally white. or you can just get the pump motor dropped in the mail... -$10
new balljoint for front LCAs...(baggy on the left) the exact one needed for both stock. im 80% sure its MOOG, but i could be wrong.. i bought it a couple months ago, before i got tubular LCAs... never ended up putting it in.
generic coolent overflow tank kit. has mount, hose, and universal tank. $20
3 series Posi.. pinion nut backed off runing the gears. posi was not harmed still works great. total milage on posi is LOW.- $150 - i have more pics, PM me
the posi itself is in great condition. its not damaged at all.
posi history: 400SBC flexplate... SFI approved. - $35 - i have more pics, PM me
centerforce 400SBC to T56flywheel... over $300 new. never been resurfaced. it does need a new ring gear pressed on. only surface rust from
non-use --$150- i have more pics, PM me
400 SBC to T56 flywheel. needs new ring gear. i have lots of pics. PM me if interested.
ok, im doing a little house cleaning of all the parts ive collected over years.
buyer pays all shipping.. if you have some good parts for trade, PM me.. if you want to offer a different price, PM me...
some of these parts are just tiny things.. i know they're not quite worth the $10 im asking for them, but buy something else, and i'll toss it in
the box free... when you consider i have to find a box, pack it, and goto the post office on my lunchbreak, $10 is the min id go thru that
effort for... obviously if you want several small things, i'll charge ya alot less... once more PM me. consider everything OBO and PM me your
best offer.
if you look at these pics, and get the idea of the kind of parts i have, and you want something not here, PM me. i have random parts from
my old 82 camaro, a whole 91 parts car, and misc camaro parts ive gathered over the last 8 years. i dont have any firebird parts, other then
the universal stuff shared with the camaro.
anything highlighted in yellow has been sold!
all that said, here are the parts.
ok, starting with some basic stuff:
Sunpro mechanical gauges. temp, oil and voltage.. looks good in 3rdgens IMO... oil gauge comes with copper line instead of that nylon
crap.. - $50 (remember, obo on everything...) pic:
Mallory fuel pressure regulator... if you're swapping to a carb, this is the regulator you need. bearly used.. it was only used for 2,000 miles by
me. - $35
small cap computer controlled HEI distributor.. from my 91 camaro. works great. no slop, no sludge. - $35
large cap stand alone HEI... what you need if swapping to a carb. - $35
brand new ACCEL cap and rotor.. for the stand alone HEI above.. brass terminals... - $20
single plane intake... hurricane or something like that.. no damage. bearly used. perfect for that carb swap, or TBI (with a adapter). yes, it
bearly clears the camaro hood.. fits all SBCs except vortec. - $70
red drop base aircleaner... its been "massaged" by a hammer to clear my TBI.. and then was massaged more to clear a holley with a large TV bracket.. - $10
ok, some cheap stuff. REMEMBER.. everything is OBO.. some of this stuff, i have no idea of its value, so i just guessed high. make a offer. $10
in my pocket and more storage space is worth more to me then not selling some of this stuff.
700R4 crossmember. -$20
stock panhard rod, not tweaked. maybe 4thgen. - $20
stock LCAs, not tweaked. maybe 4thgen. - $20
ORB OF POWER!!! aka, vacuum ball. some people crack theirs... this one is like new. except it has dust. $10
oil cooler... complete with sandwitch adapter pictured below... $50
triangle braces... not all of the camaros got them.. if you're for handling and dont have them, heres your chance to get some.. $20
washer fluid tank... would be almost white if cleaned.. i also have a second one(not pictured) that is totally white. or you can just get the pump motor dropped in the mail... -$10
new balljoint for front LCAs...(baggy on the left) the exact one needed for both stock. im 80% sure its MOOG, but i could be wrong.. i bought it a couple months ago, before i got tubular LCAs... never ended up putting it in.
generic coolent overflow tank kit. has mount, hose, and universal tank. $20
3 series Posi.. pinion nut backed off runing the gears. posi was not harmed still works great. total milage on posi is LOW.- $150 - i have more pics, PM me
the posi itself is in great condition. its not damaged at all.
posi history:
it was from a 96 LT1 car, when the owner put a 12bolt in, i got the rear... it had 28,000 miles on it.. whole car is like new, hes one of those guys that buys a fbody and just keeps it shiny.. never drives it much. at around 26000, he did have gears installed.
i put about 5,000 miles on the rear before i started to hear a noise from it. apparently whoever put the gears in the car didnt do the crush sleeve right, and the gears were wearing into themselves.
rather then fix it, i just swapped rears with a good LT1 rear i had. i pulled the posi and took the pics.
total mileage is about 33,000... so theres still ALOT of life left.
as for the brand, id guess eaton, but its whatever came stock in 96 camaros.
thats the total history on that posi...
i put about 5,000 miles on the rear before i started to hear a noise from it. apparently whoever put the gears in the car didnt do the crush sleeve right, and the gears were wearing into themselves.
rather then fix it, i just swapped rears with a good LT1 rear i had. i pulled the posi and took the pics.
total mileage is about 33,000... so theres still ALOT of life left.
as for the brand, id guess eaton, but its whatever came stock in 96 camaros.
thats the total history on that posi...
centerforce 400SBC to T56flywheel... over $300 new. never been resurfaced. it does need a new ring gear pressed on. only surface rust from
non-use --$150- i have more pics, PM me
400 SBC to T56 flywheel. needs new ring gear. i have lots of pics. PM me if interested.
01-31-2006, 04:03 PM
#2
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
valvecovers:
early SBC ones, with PCV hole added.. needs moroso baffled PCV grommet to be used. - $15
L03/L98 centerbolt valvecovers - $15
Summit drop base aircleaner... $10
SBC timing chain cover with timing tab at 2 o'clock position... $10
stock coils... one might be a blaster coil.. i forget if blasters look diffrent or not.. if one isnt, then i dont know where it came from. lol. $15
real wood, woodgrain trim for 90-92 camaro. all pieces are great except bottom of shifter plate, and the one that goes over the window
buttons. - $30 obo
some pedals, 4thgen i think. best offer.
ragjoint for 3rdgen $10
10bolt case.. "LT1" style.. no axles, no diff, no cover. just the basic housing. -free, but no shipping. pic: http://66.83.134.202/travis/PartsForSale/axle.jpg
not pictured:
comp cam solid roller (255/262 @.050 on a 114LSA) - $180 obo
91 camaro front bumper. NOT cover, the actual metal bumper and plastic thingy on it.. $20
almost any misc small parts you can think of from 90+ 3rdgen camaros...
remember, everything is prettymuch OBO...
02-01-2006, 07:13 PM
#5
Senior Member
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Mini Starter price? Have a drivers side grid taillight, or a passenger fender park light and mounting hardware?
02-02-2006, 01:20 PM
#7
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Originally posted by KWIK84
Mini Starter price? Have a drivers side grid taillight, or a passenger fender park light and mounting hardware?
Mini Starter price? Have a drivers side grid taillight, or a passenger fender park light and mounting hardware?
i do have fender lights somewhere.. id have to dig them up and check condition first... i dont have a extra grid light to sell.
Trending Topics
02-02-2006, 01:21 PM
#8
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Originally posted by ml258-89iroc
I am interested in the small cap dist. 35.00 how much for shipping to 14120?
I am interested in the small cap dist. 35.00 how much for shipping to 14120?
02-02-2006, 03:56 PM
#9
02-03-2006, 02:32 PM
#11
Member
Join Date: Aug 2004
Location: New Jersey
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 400 sbc
Transmission: 700R4
Details on the ministarter please, I'm interested.
153 or 168? How long has it been used? What brand/model number?
- Justin
153 or 168? How long has it been used? What brand/model number?
- Justin
02-03-2006, 02:46 PM
#12
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Originally posted by Tru2Chevy
Details on the ministarter please, I'm interested.
153 or 168? How long has it been used? What brand/model number?
- Justin
Details on the ministarter please, I'm interested.
153 or 168? How long has it been used? What brand/model number?
- Justin
it was used for just over 2 weeks on my 400... then i took the 400 out and went to a LS1. orignally i put it in because i didnt realize i fugged up the teeth on the flywheel.
starter wasnt harmed though.
its sat in a box, in a enclosed garage for over a year now.. thats why it looks used. really, its almost new.
i dont know the brand, but i bought it from summit... knowing me, its probly the summit brand. but i cant be sure.
03-03-2006, 07:44 AM
#19
Supreme Member
Thread Starter
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
nope.
everything is sold that will be sold for now.. im having shipping problems as is, i wont be selling anything for a little bit.
everything is sold that will be sold for now.. im having shipping problems as is, i wont be selling anything for a little bit.
Thread
Thread Starter
Forum
Replies
Last Post