parting out 2 89 formulas black interiors and grey interiors
03-26-2006, 09:19 PM
#1
parting out 2 89 formulas black interiors and grey interiors
i have aquired 2 89 formulas. one is a E code and the other is an 8 code. both motors were gone when i got the cars. only 1 car has a trans and its an auto. dunno much about it.
i have tail lights, 3 of the main black interior panels, black kick panels, black door sill plates, good front and rear seat belt sets and the front recievers have good sleeves on them NO CRACKS!!. i also have a good pair of hard top black visors. i also have a few set of formula rims, some have spots on the lips and some dont, im letting all the wheels go for cheap+ ship. and i also have a good black back seat set. these parts are trashed so i can help eliminate ques, headliner,wing, front fenders, pass side door, hood, nose, hatch to headliner panel.
now for the gray parts, i have almost all of the intrerior plastic as far as i can tell except the part between the hatch and headliner.
i have 2 decent doors, dr side fender, front seat belt recievers, one SMALL crack in the drivers side, complete rear seatbelt set.
if you need anything i havent mentioned please ask and i will also take pics if needed. make offers and offer dosent include shipping. i can get shippig for a reasonable low cost on most stuff. all reasonable offers entertained.
i have tail lights, 3 of the main black interior panels, black kick panels, black door sill plates, good front and rear seat belt sets and the front recievers have good sleeves on them NO CRACKS!!. i also have a good pair of hard top black visors. i also have a few set of formula rims, some have spots on the lips and some dont, im letting all the wheels go for cheap+ ship. and i also have a good black back seat set. these parts are trashed so i can help eliminate ques, headliner,wing, front fenders, pass side door, hood, nose, hatch to headliner panel.
now for the gray parts, i have almost all of the intrerior plastic as far as i can tell except the part between the hatch and headliner.
i have 2 decent doors, dr side fender, front seat belt recievers, one SMALL crack in the drivers side, complete rear seatbelt set.
if you need anything i havent mentioned please ask and i will also take pics if needed. make offers and offer dosent include shipping. i can get shippig for a reasonable low cost on most stuff. all reasonable offers entertained.
03-27-2006, 09:14 AM
#7
Member
iTrader: (10)
Join Date: Aug 2005
Location: Ocean Springs, MS
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Monte Carlo SS
Engine: HSR 383 AFR180/268XFI EBL
Transmission: 200-4R, Edge 2800 L/U
Axle/Gears: 7.5/3.73/PowerTrax No-Slip
Any chance either of the cars has TPI fuel lines left (lines from engine to main lines)?
Thanks.
Thanks.
Trending Topics
03-27-2006, 10:42 AM
#9
03-27-2006, 08:57 PM
#11
Member
Join Date: Aug 2005
Location: Fres-Yes, California
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Car: A beater.
Engine: Not enough HP.
Transmission: Automatic... I can't drive a stick!
How much for the black seat belts? For the entire thing? And do you have both sides of door panels? How much? I'm interested... Oh yeah, and area 93703. It's in California. 
03-30-2006, 06:11 PM
#22
Member
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
What types of Rear ends do they have? Im lookin for a 3.42 posi disc rear.. If that guy needs the disc brackets, i can swap mine onto it hopefully...
or a 3.73 posi also.. But thanks!!!
or a 3.73 posi also.. But thanks!!!
03-30-2006, 07:22 PM
#24
Junior Member
Join Date: Feb 2006
Location: fort gratiot, michigan
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Pontiac Trans Am
Engine: 383 stroker 4 bolt roller, juiced
Transmission: b&M th400
Axle/Gears: 4.10 with c-clip elims
i need the gray interior... doors, and pretty much everything but the dash center counsil,and headliner do you have the carpet as well? black or grey is fine..
03-30-2006, 10:55 PM
#26
cornholio: seatbelts are pending
short bed: it has a 2.77 9 bolt but the brakes are going on my 83 and the plates are going on my spare borg rear. the borg rear is for sale.
pete: the black car has a 140 cluster and it "looks" nice. i was waiting till i could pop mine uot and test this unit in my car as i would hate to sell a bad unit. get back with me within the next week and i'll hopefully have it tested. i'll decide on price after iv tested it.
pony: yes i have a trim plate thats ok. i would run it in my car but use some plastic polish which would definantly bring it around to be quite a nice piece.$20 shipped.
wezeles: let me get into that car over the next week and get an invintory of whats there, whats not, whats good and whats not. i do know the dr side front seatbelt is gone or somewhere in the car. the door are pending.
92lpe: pony beat ya to the punch on the trim plate but i do have a radio pod for sale that is nice. its missing one vent and the top bar is cracked but the mounts are good. even though teh top bar is cracked , once mounted its very stable and that bar really dosent do much. as i think about it mine is cracked but ya wouldnt ever know.$40 shipped.
edit i went out and double checked the other trim plate i thought was trashed. i washed it and it came out ok. it is missing 2 clips on opposite sides of each other , i'll throw it in being its condition
short bed: it has a 2.77 9 bolt but the brakes are going on my 83 and the plates are going on my spare borg rear. the borg rear is for sale.
pete: the black car has a 140 cluster and it "looks" nice. i was waiting till i could pop mine uot and test this unit in my car as i would hate to sell a bad unit. get back with me within the next week and i'll hopefully have it tested. i'll decide on price after iv tested it.
pony: yes i have a trim plate thats ok. i would run it in my car but use some plastic polish which would definantly bring it around to be quite a nice piece.$20 shipped.
wezeles: let me get into that car over the next week and get an invintory of whats there, whats not, whats good and whats not. i do know the dr side front seatbelt is gone or somewhere in the car. the door are pending.
92lpe: pony beat ya to the punch on the trim plate but i do have a radio pod for sale that is nice. its missing one vent and the top bar is cracked but the mounts are good. even though teh top bar is cracked , once mounted its very stable and that bar really dosent do much. as i think about it mine is cracked but ya wouldnt ever know.$40 shipped.
edit i went out and double checked the other trim plate i thought was trashed. i washed it and it came out ok. it is missing 2 clips on opposite sides of each other , i'll throw it in being its condition
Last edited by QUICKCHICKEN; 03-30-2006 at 11:05 PM.
03-30-2006, 11:27 PM
#28
PA the dr side has a split between the honeycomb and the hump part. the split isnt to the end and once screwed in this part is supported. the honeycomb area dosent have any door drag marks from a saggy door ither but they do have some scuffs here an there.
make a reasonable offer $7 shipped.
make a reasonable offer $7 shipped.
03-31-2006, 08:54 AM
#31
Member
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
[QUOTE=QUICKCHICKEN]
short bed: it has a 2.77 9 bolt but the brakes are going on my 83 and the plates are going on my spare borg rear. the borg rear is for sale.
QUOTE]
Please give me info on the Borg Warner rear... Thanks.. It is posi correct?
short bed: it has a 2.77 9 bolt but the brakes are going on my 83 and the plates are going on my spare borg rear. the borg rear is for sale.
QUOTE]
Please give me info on the Borg Warner rear... Thanks.. It is posi correct?
03-31-2006, 02:35 PM
#35
Member
Join Date: Aug 2005
Location: Salisbury NC
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 3.4 Liter
Transmission: 5 speed
Axle/Gears: stock
Do you still have all of the rear paneling? (Hatchback area and even the back seat area speaker covers)
03-31-2006, 05:38 PM
#36
Member
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
CAN I GET SOME INFO ON A REAR END???? ??????? THANKS!!!!!!!!
03-31-2006, 10:32 PM
#38
fastbird: wehen you say electrical connections, do you mean the wireing or just the connector tab on the motor and by drum i asume you mean the squirrl cage correct?
indiroc: i will hafta jack the car up and check. i never drove the car so i dont know its condition. when i get a chance to look at it i'll crack the cover and look at the gear pattern and spin it over to see what the rotation reveals. im going to be as honest as possible when i look at it as i'll have a friend that sets up the rear ends in our club to second opinion it. i cannot guarantee the rear.
i'll report back as soon as i can on it.
toxik: no the only cup holders i had were the gray set that are sold. dunno why they were in one of the cars as that wasnt an option till 91-92 :shrug:
Derick: which color panels are you needing and exactly which ones? i have the 3 main panels, kick panels,and under hatch panel. the hatch to headliner panel is trashed.
as for the gray i have everything mentioned with the black set including door sills. the sail panels (speaker covers) i'll hafta check on but i thein they are there.
----------
casajim the hatch motor is pending. the other one is busted.
indiroc: i will hafta jack the car up and check. i never drove the car so i dont know its condition. when i get a chance to look at it i'll crack the cover and look at the gear pattern and spin it over to see what the rotation reveals. im going to be as honest as possible when i look at it as i'll have a friend that sets up the rear ends in our club to second opinion it. i cannot guarantee the rear.
i'll report back as soon as i can on it.
toxik: no the only cup holders i had were the gray set that are sold. dunno why they were in one of the cars as that wasnt an option till 91-92 :shrug:
Derick: which color panels are you needing and exactly which ones? i have the 3 main panels, kick panels,and under hatch panel. the hatch to headliner panel is trashed.
as for the gray i have everything mentioned with the black set including door sills. the sail panels (speaker covers) i'll hafta check on but i thein they are there.
----------
casajim the hatch motor is pending. the other one is busted.
Last edited by QUICKCHICKEN; 03-31-2006 at 10:34 PM. Reason: Automerged Doublepost
04-01-2006, 12:12 AM
#41
Junior Member
Join Date: Mar 2006
Location: rochester, ny
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 firebird, 02 silverado z71
Engine: 383 with custom TBI/5.3L
Transmission: 700r4/4L80E
Axle/Gears: 3.42posi/3.92locker
lookin for the black trim piece that fills in the lower dash below the steering column, thanks
04-01-2006, 12:20 AM
#42
Originally Posted by idoxlr8faster
lookin for the black trim piece that fills in the lower dash below the steering column, thanks
04-01-2006, 06:38 AM
#43
Member
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
[QUOTE] indiroc: i will hafta jack the car up and check. i never drove the car so i dont know its condition. when i get a chance to look at it i'll crack the cover and look at the gear pattern and spin it over to see what the rotation reveals. im going to be as honest as possible when i look at it as i'll have a friend that sets up the rear ends in our club to second opinion it. i cannot guarantee the rear.
i'll report back as soon as i can on it [QUOTE]
OK- thanks that will work!!!!
i'll report back as soon as i can on it [QUOTE]
OK- thanks that will work!!!!
04-01-2006, 01:01 PM
#45
Junior Member
Join Date: Feb 2006
Location: fort gratiot, michigan
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Pontiac Trans Am
Engine: 383 stroker 4 bolt roller, juiced
Transmission: b&M th400
Axle/Gears: 4.10 with c-clip elims
i dont need the acctual doors just the panels for the inside and all the grey plastic from pretty much the headliner down besides the dash and center council, and the carpet if its in decent condition right now im working with tan interior with a slop dye job trying to make it black on the tan carpet... dont ask.. lol thats how it was when i bought it
04-01-2006, 05:43 PM
#46
indiroc: i just talked to my friend and he said he would get with me but it may be a few weeks. plus thats one ofthe last things i want to sell as i need a rear to roll it around on. when i DO sell t you are the first person in line and you have dibbs.
fast bird: send me an E mail addy so i can mail you a pic of the avail motors. want to make sure everything you have matches.
this is what i have that is good, all of the main back plastic, sill plates, kick panels, the trim around the gauges (black), all of the seatbelts except the dr side which im sure i can get my hands on easily,and the carpet (pending its in worthy condition). the headliner is trashed, as are the door panels. if you are good at interior work the fabric can be fixed. i dont know about the condition of the holes where the plastic at the top of the panel mounts to but i can check. both consoles are bad as well. if ya need a console yo ucan do a 4th auto in a 3rd auto swap. 85 F bird did a post on this. heres the link
https://www.thirdgen.org/forums/body...ic-center.html
i'll get an invintory of that car today.
fast bird: send me an E mail addy so i can mail you a pic of the avail motors. want to make sure everything you have matches.
this is what i have that is good, all of the main back plastic, sill plates, kick panels, the trim around the gauges (black), all of the seatbelts except the dr side which im sure i can get my hands on easily,and the carpet (pending its in worthy condition). the headliner is trashed, as are the door panels. if you are good at interior work the fabric can be fixed. i dont know about the condition of the holes where the plastic at the top of the panel mounts to but i can check. both consoles are bad as well. if ya need a console yo ucan do a 4th auto in a 3rd auto swap. 85 F bird did a post on this. heres the link
https://www.thirdgen.org/forums/body...ic-center.html
i'll get an invintory of that car today.
04-01-2006, 06:09 PM
#47
Member
Join Date: Nov 2005
Location: Southern IN
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC Z-28
Engine: Rebuilt Vortec Headded 358SB 9.5:1
Transmission: 700r4, corvette servo, Transgo kit
Axle/Gears: 3.23 POSI
Originally Posted by QUICKCHICKEN
indiroc: i just talked to my friend and he said he would get with me but it may be a few weeks. plus thats one ofthe last things i want to sell as i need a rear to roll it around on. when i DO sell t you are the first person in line and you have dibbs.
fast bird: send me an E mail addy so i can mail you a pic of the avail motors. want to make sure everything you have matches.
this is what i have that is good, all of the main back plastic, sill plates, kick panels, the trim around the gauges (black), all of the seatbelts except the dr side which im sure i can get my hands on easily,and the carpet (pending its in worthy condition). the headliner is trashed, as are the door panels. if you are good at interior work the fabric can be fixed. i dont know about the condition of the holes where the plastic at the top of the panel mounts to but i can check. both consoles are bad as well. if ya need a console yo ucan do a 4th auto in a 3rd auto swap. 85 F bird did a post on this. heres the link
https://www.thirdgen.org/forums/body...ic-center.html
i'll get an invintory of that car today.
fast bird: send me an E mail addy so i can mail you a pic of the avail motors. want to make sure everything you have matches.
this is what i have that is good, all of the main back plastic, sill plates, kick panels, the trim around the gauges (black), all of the seatbelts except the dr side which im sure i can get my hands on easily,and the carpet (pending its in worthy condition). the headliner is trashed, as are the door panels. if you are good at interior work the fabric can be fixed. i dont know about the condition of the holes where the plastic at the top of the panel mounts to but i can check. both consoles are bad as well. if ya need a console yo ucan do a 4th auto in a 3rd auto swap. 85 F bird did a post on this. heres the link
https://www.thirdgen.org/forums/body...ic-center.html
i'll get an invintory of that car today.
