Chain-driven vs. Gear-driven Timing Gears
Thread Starter
Junior Member
Joined: Nov 2004
Posts: 51
Likes: 0
From: NC
Car: '89 RS
Engine: LT1 350 9C1
Transmission: T-56
Chain-driven vs. Gear-driven Timing Gears
I was thinkin about installing a gear-driven timing setup instead of the chain-driven type since I'm gonna be pullin the front of the motor off this weekend anyway. Is there any disadvantage to the gear-type? Thanks a MILLION!
Joined: Jan 2005
Posts: 10,450
Likes: 510
From: Hurst, Texas
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
Originally Posted by manchesterbeast
makes more noise
Senior Member
iTrader: (4)
Joined: Mar 2006
Posts: 683
Likes: 2
From: Florida
Car: '87 Trans-Am
Engine: LB9 (305 TPI)
Transmission: 700R4
Axle/Gears: 3.42 or 3.73..figuring it out still
Well, it doesnt seem to affect my knock sensor on my motor...which is an '89 TPI 350. But it is loud. I like it now, but I can see it being annoying in a few months or early in the morning when Im hung over and just want to get to work. Though, timing gears are more accurate to slight degree and generally are used for race applications to maintain the accurate timing...which probably isnt necessary in your engine application. So unless you like the noise, I wouldn't do it.
chp or car craft did a review on this a lil ways back. Between a timing chain, gear drive, belt drive, and some other fancy crap. I think there was like a 1hp difference between all of them. So choose what you wish. If you getta pete jackson, the quiet one I couldnt hear, and now the loud one I can't hear
. No but thats what happens when you have no mufflers. On the outside of the car the quiet i couldnt really hear to well, the loud you can definetly hear a whine. Wish I stuck with the quiet but what ever.
. No but thats what happens when you have no mufflers. On the outside of the car the quiet i couldnt really hear to well, the loud you can definetly hear a whine. Wish I stuck with the quiet but what ever. Trending Topics
Supreme Member
Joined: Aug 2005
Posts: 3,004
Likes: 4
From: Yellowknife, NWT, Canada
Car: 84 Z28
Engine: 357
Transmission: TH-350C
Axle/Gears: 3.43
You will get lots of mixed info about the gear drives...
Some will say it screws with knock sensors some will say it has no effect. Some say they are more acurate than a chain some say a good chain is no different. and so on...
Some will say it screws with knock sensors some will say it has no effect. Some say they are more acurate than a chain some say a good chain is no different. and so on...
Guest
Posts: n/a
I'm not sure if there's any more rotating mass with a gear drive or not. I'd think not, the idler gears are fairly small and you dont have all that mass around the outside of the cam gear or crank gear like with a chain.
If you arent looking for the noise, I wouldnt do it. Some people find it downright annoying.
If you arent looking for the noise, I wouldnt do it. Some people find it downright annoying.
Moderator


Joined: Jul 1999
Posts: 17,274
Likes: 171
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
I had a noisy set in my car. After 5 passes down the track, I put a chain back in. A noisy gear drive is very annoying.
Of course with the dual air filters sticking out of the hood, it sounded like I had a blower under the hood.
Of course with the dual air filters sticking out of the hood, it sounded like I had a blower under the hood.
Thread Starter
Junior Member
Joined: Nov 2004
Posts: 51
Likes: 0
From: NC
Car: '89 RS
Engine: LT1 350 9C1
Transmission: T-56
I think the noise sounds pretty sweet. Like Steven said, it sounds like a supercharger under the hood. Are they pretty easy to install and how long do they last compared to the chain? THANX!
Originally Posted by Jacobs454
I think the noise sounds pretty sweet. Like Steven said, it sounds like a supercharger under the hood. Are they pretty easy to install and how long do they last compared to the chain? THANX!
Ive had 2 now with no problems, pretty easy to install, might have to grind a little of the back lil spacer thing on the idler gear but no biggie
Junior Member
Joined: May 2009
Posts: 1
Likes: 0
From: Appleton, WI
Car: '82 Camaro
Engine: Slightly built 350
Transmission: 3A
Axle/Gears: unknown
Re: Chain-driven vs. Gear-driven Timing Gears
It is actually very annoying, I have a 350 with gear timing among other mods, and inside the car thats all you can hear. the very first drive with it was cool, now its downright loud and annoying
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
junkcltr
Tech / General Engine
6
Aug 2, 2019 11:12 PM








