Free 305 roller block and heads, TBI
04-20-2008, 10:33 AM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Spring, TX
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Bird
Engine: TPI 350
Transmission: 5-Speed
Axle/Gears: 2.77 posi
Free 305 roller block and heads, TBI
Just pulled it an hour ago. Complete block and heads, Intake, TBI. You can have the wiring harness and ECM if you can wait awhile - I need to look at it to compare the wiring to the TPI I am putting in.
From 1991 firebird.
High miles, was still using it as a work car until yesterday. It will need rebuilding but didn't smoke other than the oil leak. Throw out bearing went out so I decided now is the time to start putting in the new engine.
Located in Spring. I have no where to keep it so if it doesn't go quick I'm calling the scrap man.
From 1991 firebird.
High miles, was still using it as a work car until yesterday. It will need rebuilding but didn't smoke other than the oil leak. Throw out bearing went out so I decided now is the time to start putting in the new engine.
Located in Spring. I have no where to keep it so if it doesn't go quick I'm calling the scrap man.
04-24-2008, 10:17 PM
#2
Member
Join Date: Jan 2008
Location: Houston, Texas
Posts: 293
Likes: 0
Received 2 Likes
on
2 Posts
Car: 84' Z28-White/T-Tops
Engine: H code LG4 305
Transmission: TH700R4
Axle/Gears: Stock 3.23
Re: Free 305 roller block and heads, TBI
I got a place in spring I could put it but I don't have a way of getting it there. PM me if you still need to find a good home for it.
04-25-2008, 08:02 AM
#3
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Free 305 roller block and heads, TBI
I have a place for it and a way to get it there. I could pick it up anytime this weekend....as a matter of fact I might be on the north side of town this afternoon.
I'm especially interested in the harness and computer when available.
I'm especially interested in the harness and computer when available.
04-25-2008, 10:08 AM
#4
Supreme Member
iTrader: (2)
Join Date: Dec 2006
Location: Hou. TX
Posts: 5,538
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 TA, 91 B4C
Engine: 5.3, 4.8
Transmission: 4L80 4000, T56
Axle/Gears: 4.30 M12, 23.42 10 bolt
Re: Free 305 roller block and heads, TBI
Well, I should be picking it up today Eric, you are more than welcome to the wiring harness, what time might you be up here? I need to trade you a bumper for a brake system, it is finally that time
04-25-2008, 03:18 PM
#5
Member
iTrader: (2)
Join Date: Jan 2005
Location: Texas
Posts: 475
Received 0 Likes
on
0 Posts
Car: 1991 RS Camaro Convertible
Engine: 305
Transmission: 700R4
Re: Free 305 roller block and heads, TBI
Just pulled it an hour ago. Complete block and heads, Intake, TBI. You can have the wiring harness and ECM if you can wait awhile - I need to look at it to compare the wiring to the TPI I am putting in.
From 1991 firebird.
High miles, was still using it as a work car until yesterday. It will need rebuilding but didn't smoke other than the oil leak. Throw out bearing went out so I decided now is the time to start putting in the new engine.
Located in Spring. I have no where to keep it so if it doesn't go quick I'm calling the scrap man.
From 1991 firebird.
High miles, was still using it as a work car until yesterday. It will need rebuilding but didn't smoke other than the oil leak. Throw out bearing went out so I decided now is the time to start putting in the new engine.
Located in Spring. I have no where to keep it so if it doesn't go quick I'm calling the scrap man.
I repinned my TBI Harness to fit the new Speed density TPI I fitted. It was quite easy to do and saved money.Alex
04-25-2008, 10:44 PM
#7
Supreme Member
iTrader: (2)
Join Date: Dec 2006
Location: Hou. TX
Posts: 5,538
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 TA, 91 B4C
Engine: 5.3, 4.8
Transmission: 4L80 4000, T56
Axle/Gears: 4.30 M12, 23.42 10 bolt
Re: Free 305 roller block and heads, TBI
Heck man, the work already started. You have a motor fresh and ready to go, now you just need to finish. Great looking car though man, nice to mee you.
Thread
Thread Starter
Forum
Replies
Last Post
