Rear disk brake set-up
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Detroit, Michigan
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Car: 04 Xtreme Blazer
Engine: 4.3L V6
Transmission: 4L60E
Rear disk brake set-up
If HITHERE get these parts from
http://www.thirdgenresource.com/
will this be all HITHERE Need to install rear disk brakes on my 89 IROC w/ 10 bolt rear end?
L & R Calipers 89-92 , used $ 35 each
2 rotors 89-92 , used $ 20 each
L & R caliper mounting brakets 89-92 , new $ 18 each
1 rear disk brakeproportioning valve 89-92 , used $ 50
2 HITHERE-brake cables 89-92 , new $ 39 each
New pads
hoses& other misc. hardware (bolts, ect.)
is this what HITHERE will need?, anything else that HITHERE missed?
http://www.thirdgenresource.com/
will this be all HITHERE Need to install rear disk brakes on my 89 IROC w/ 10 bolt rear end?
L & R Calipers 89-92 , used $ 35 each
2 rotors 89-92 , used $ 20 each
L & R caliper mounting brakets 89-92 , new $ 18 each
1 rear disk brakeproportioning valve 89-92 , used $ 50
2 HITHERE-brake cables 89-92 , new $ 39 each
New pads
hoses& other misc. hardware (bolts, ect.)
is this what HITHERE will need?, anything else that HITHERE missed?
Last edited by Dave Y; 04-01-2003 at 06:49 PM.
#2
Supreme Member
Join Date: Feb 2000
Location: Midlothian,VA. 23112-6108
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z-28
Engine: 5.0 w/ Holly carb
Transmission: TH-700R4
Are these conversion components to be installed on a drum, or disc rear.
What brake lines and hoses are you going to use?
Thanx, andyZ28
What brake lines and hoses are you going to use?
Thanx, andyZ28
#3
Moderator
iTrader: (5)
Hey, AndyZ,
Welcome back to the boards. Should you still have a rear disc set-up, I'd be interested (I'd like to go from the old style rear discs to the PBR on my 85 IROC. I've modified my front spindles according to your instructions and will be ordering the 1LE brake kit from Steve within a few days). Be cool to do the whole business in one shot.
JamesC
Welcome back to the boards. Should you still have a rear disc set-up, I'd be interested (I'd like to go from the old style rear discs to the PBR on my 85 IROC. I've modified my front spindles according to your instructions and will be ordering the 1LE brake kit from Steve within a few days). Be cool to do the whole business in one shot.
JamesC
#4
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Detroit, Michigan
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Car: 04 Xtreme Blazer
Engine: 4.3L V6
Transmission: 4L60E
I was wondering if these would work on a drum(10 bolt) rear
I would use whatever lines/ hoses I would need
I would use whatever lines/ hoses I would need
#5
Supreme Member
Join Date: Feb 2000
Location: Midlothian,VA. 23112-6108
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z-28
Engine: 5.0 w/ Holly carb
Transmission: TH-700R4
Dave Y I suggest you get my CD if you are planning any brake upgrade using GM parts. James C and many other members have my CD, and you can ask their opinion abaut this.
Thanx, andyZ28
Thanx, andyZ28
Thread
Thread Starter
Forum
Replies
Last Post