Where to get a new torque arm bracket?
03-14-2006, 09:29 AM
#1
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Long Island, New York
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91RS
Engine: 305tbi
Transmission: 700R4
Where to get a new torque arm bracket?
I'm doing the 700r4 - t5 swap and basically everything is done except for one snag I hit. Whoever removed my t5 took a sawzall to the torque arm bracket and cut it in half.
Anyone know where I can get a new torque arm bracket or some aftermarket option that would work? I was thinking of cutting the one off the 700r4 in half and welding them together making a good bracket is that a bad idea?
Anyone know where I can get a new torque arm bracket or some aftermarket option that would work? I was thinking of cutting the one off the 700r4 in half and welding them together making a good bracket is that a bad idea?
03-14-2006, 07:53 PM
#2
Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Irmo, SC
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Pontiac GTA
Engine: 305TPI
Transmission: 700R4
Axle/Gears: 10-bolt, 2.73
The bracket for the torque arm is different between manual and automatic transmissions. So, basically chopping the old 700R4 bracket in half is not that bad since you do not need it.
The bracket should be a pretty easy junkyard find. Otherwise, the two halves of the bracket are should still be dealer-stocked. Try a GM#10024028 and #10024025. The associateed bolts are different too.
The bracket should be a pretty easy junkyard find. Otherwise, the two halves of the bracket are should still be dealer-stocked. Try a GM#10024028 and #10024025. The associateed bolts are different too.
03-19-2006, 06:39 PM
#3
Member
Join Date: Aug 2005
Location: Great Lakes State
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 gta ws6, Dodge Turbo Diesel, H-D
Engine: 383 4-bolt #638 block
Transmission: 700r4, corvette servo, 2200 stall
Axle/Gears: 3.27 9 bolt b-w, pbr discs
torque arm bracket
Just do a parts wanted now post in the parts wanted section of our site.
Good luck!!
Good luck!!
Thread
Thread Starter
Forum
Replies
Last Post
Ragtop Man
Transmissions and Drivetrain
2
09-12-2015 12:23 AM
