need mod advice
#1
Member
Thread Starter
Join Date: Mar 2000
Location: jacksonville
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
need mod advice
MY next paycheck should be about 500 at least. I was thinking SFC's for sure I need to get out of the way. What is the best bang for the buck SFC and how much do you think a shop would cost to wheld them in?
I also wanted to get a fast chip.
What else after that? Replace all of ignition?
------------------
89 camaro 305 tbi, flomaster 3 chamber cat back, gutted cat, Edlebrock TES Headers, Exhaust cutout, Edlebrock open element, and a 160 degree T-stat. 2 kicker comp 12"'s, polk for the rest. Phoenix gold xs2300 to subs, kicker impulse 404XI to 4 speakers, pioneer DEH- P7000R head unit, and finally a 12 disc changer. Full leather interior from http://www.MrMikes.com (its nice)
I also wanted to get a fast chip.
What else after that? Replace all of ignition?
------------------
89 camaro 305 tbi, flomaster 3 chamber cat back, gutted cat, Edlebrock TES Headers, Exhaust cutout, Edlebrock open element, and a 160 degree T-stat. 2 kicker comp 12"'s, polk for the rest. Phoenix gold xs2300 to subs, kicker impulse 404XI to 4 speakers, pioneer DEH- P7000R head unit, and finally a 12 disc changer. Full leather interior from http://www.MrMikes.com (its nice)
#4
Alstons are supposed to be the best. http://www.freestanding.com/servlet/ARCatalog
------------------
-Tas
'89 Formula WS-6
305, TBI, auto, 14x3 chrome flat based open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips....
Soon to be installed:
Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248), Catco 3" cat, and injector spacer.
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
AOL IM: superGRtaz
------------------
-Tas
'89 Formula WS-6
305, TBI, auto, 14x3 chrome flat based open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips....
Soon to be installed:
Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248), Catco 3" cat, and injector spacer.
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
AOL IM: superGRtaz
#5
Supreme Member
Join Date: Oct 1999
Location: Davison / Troy ,Michigan
Posts: 2,977
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Pontiac Firebird
Engine: 3.8
Transmission: 700r4
Axle/Gears: Dana 60
I liked my KYB gas-a-just shocks and GR-2 Struts and they only costed me like 130 bucks. Made an awesome differnce in handling. Also look into Edelbrock's Strut Tower brace for TBI engines. That made a awesome difference to and it was only 132.00. And I replaced all my igntion stuff with MSD. http://members.aol.com/j007golden/ignition.html
Check out my mod site and look thru there. I have pics and tech help on all the mods I have done. Hope it helps ur decision. SFC's I heard were a good mod too but I haven't done them yet
------------------
Eric Natzke
91 Firebird 305 TBI
"It Ain't Stock"
http://members.aol.com/j007golden/91firebird.html
For info on certain parts or mods go to the site below
http://members.aol.com/j007golden/modeval.html
Check out my mod site and look thru there. I have pics and tech help on all the mods I have done. Hope it helps ur decision. SFC's I heard were a good mod too but I haven't done them yet
------------------
Eric Natzke
91 Firebird 305 TBI
"It Ain't Stock"
http://members.aol.com/j007golden/91firebird.html
For info on certain parts or mods go to the site below
http://members.aol.com/j007golden/modeval.html
#6
Member
Join Date: Oct 1999
Location: Cincinnati,Ohio,Usa
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Mike, not really related to what your considering with this next paycheck, but have you considered gears? Could run total just a hair above a single paycheck, but worth every penny. Period.
Jerry
------------------
1989 Lt. Blue RS 5-speed
355 crate motor, Compucam 2040,
PST Front suspension,
Hotchkis rear suspension,
EDL T.E.S., 3" Flowmaster
Harwood cowl hood
1994 Black Z28 6-speed
Nothing major, but FUN!
Jerry
------------------
1989 Lt. Blue RS 5-speed
355 crate motor, Compucam 2040,
PST Front suspension,
Hotchkis rear suspension,
EDL T.E.S., 3" Flowmaster
Harwood cowl hood
1994 Black Z28 6-speed
Nothing major, but FUN!
#7
Member
Thread Starter
Join Date: Mar 2000
Location: jacksonville
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
yeah I have considered gears. Hopefully I will order a chip and SFC's with this check and then by next check I will have enough to get SLP posi, 3.42 gears, then fix speedo with a gear. I will have a local shop put them in, they all want $250 to do it.
------------------
89 camaro 305 tbi, flomaster 3 chamber cat back, gutted cat, Edlebrock TES Headers, Exhaust cutout, Edlebrock open element, and a 160 degree T-stat. 2 kicker comp 12"'s, polk for the rest. Phoenix gold xs2300 to subs, kicker impulse 404XI to 4 speakers, pioneer DEH- P7000R head unit, and finally a 12 disc changer. Full leather interior from http://www.MrMikes.com (its nice)
------------------
89 camaro 305 tbi, flomaster 3 chamber cat back, gutted cat, Edlebrock TES Headers, Exhaust cutout, Edlebrock open element, and a 160 degree T-stat. 2 kicker comp 12"'s, polk for the rest. Phoenix gold xs2300 to subs, kicker impulse 404XI to 4 speakers, pioneer DEH- P7000R head unit, and finally a 12 disc changer. Full leather interior from http://www.MrMikes.com (its nice)
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM