heater and washer sprayer
#1
Junior Member
Thread Starter
Join Date: Mar 2002
Location: WV
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: 5.7, Vortec heads, Headers, TBI
Transmission: Built 700R4
Axle/Gears: 3.23 BW 9-Bolt Disc Brake
heater and washer sprayer
My heater doesnt work and i found that the ground wire isnt connected some where in the wire bundle where does the wire go and where does it ground i have removed the stock computer, i dont think that will make a differece and also my washer sprayer doesnt work would it be grounded to the same wire or what? any info would be great thanks
#2
Member
Join Date: Jul 1999
Location: Okarche, OK, USA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
well, without knowing what circuit that is I can't tell. You need to get ahold of a service manual to help you. Does the blower motor work or the heater just not blow hot? more than likely the washers are failing from a separate problem. where is this ground wire at and what does it look like?
#3
Member
Join Date: Jul 2002
Location: Winnebago - 871' ASL
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
The heater blower motor has a ground wire connection at the upper left corner of the blower housing (as viewed from the front). the opposite end of this ground wire connects to the chassis at the firewall, behind the right cylinder head (along with a lot of other engine grounds).
#5
Junior Member
Thread Starter
Join Date: Mar 2002
Location: WV
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: 5.7, Vortec heads, Headers, TBI
Transmission: Built 700R4
Axle/Gears: 3.23 BW 9-Bolt Disc Brake
thanks for the info ill check all that out
Thread
Thread Starter
Forum
Replies
Last Post