82' Camaro V-belt to Serpentine
09-12-2003, 10:17 PM
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jul 2001
Location: San Antonio, TX
Posts: 1,823
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC-Z
Engine: L98 (350 TPI)
Transmission: MD8 (700 R4) + 3.42 LS1 Rear
82' Camaro V-belt to Serpentine
i'm taking the serpentine setup a 90' TBI i have in the back yard and i'm going to help a friend install it in his 82. he's been throwing belts lately and is tired of getting stranded 
. on the alternator old setup there are 2 wires(spade connector) and on the new setup 3 wires(a weatherpack connector). what wires should i run to what? i know the large wire (eye connector) goes to the back with the 10mm nut. the weather pack type connector is going to be a slight challange. help please!!!! i haven't done this type of conversion before and want to help get him back on the road ASAP! 
thanks again!!
edit : i have ran a search and found no specifics on the alternator wiring issue. i just don't want to fry a good alternator.
. on the alternator old setup there are 2 wires(spade connector) and on the new setup 3 wires(a weatherpack connector). what wires should i run to what? i know the large wire (eye connector) goes to the back with the 10mm nut. the weather pack type connector is going to be a slight challange. help please!!!! i haven't done this type of conversion before and want to help get him back on the road ASAP! thanks again!!edit : i have ran a search and found no specifics on the alternator wiring issue. i just don't want to fry a good alternator
. Last edited by mystikkal_69; 09-12-2003 at 10:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM
