Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

A funny and free exhaust upragde!

Thread Tools
 
Search this Thread
 
Old 09-09-2004, 10:51 PM
  #1  
Junior Member
Thread Starter
 
KeenEddie's Avatar
 
Join Date: Jun 2004
Location: North Carolina
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700r4
A funny and free exhaust upragde!

I was driving along a couple weeks ago and I started to hear this rattling sound. I figured it was the stupid heat shield for the cats again, as that has come loose before. However, before I could get down there to tighten it up, it stopped rattling. Cool, I thought, less work for me. Then I thought "hmm, my car was never this loud before!" Sure enough, I crawl under there, and in the pipe leading from the cats to the muffler, theres a fist sized hole right under the seat. I suppose the rattling was the piece of metal coming off.

Funny as it sounds, my car sounds awesome! I cant believe it. I also have vibrating seats now! The local imports ive come across have taken notice, not that I needed any help defeating them when circumstances dictated such a resolution. So what if I cant hear the radio?! Anyway, just thought it was a funny story, wondering if anyone else has had a similar experiance.
Old 09-09-2004, 11:04 PM
  #2  
Supreme Member

iTrader: (1)
 
porkyzilla's Avatar
 
Join Date: Jul 2002
Location: sacramento, ca USA
Posts: 2,789
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 iroc-z 5.7tpi 350,
Engine: 5.7tpi 350,
Transmission: T-56 fully built WOOHOO
Re: A funny and free exhaust upragde!

Originally posted by KeenEddie
I was driving along a couple weeks ago and I started to hear this rattling sound. I figured it was the stupid heat shield for the cats again, as that has come loose before. However, before I could get down there to tighten it up, it stopped rattling. Cool, I thought, less work for me. Then I thought "hmm, my car was never this loud before!" Sure enough, I crawl under there, and in the pipe leading from the cats to the muffler, theres a fist sized hole right under the seat. I suppose the rattling was the piece of metal coming off.

Funny as it sounds, my car sounds awesome! I cant believe it. I also have vibrating seats now! The local imports ive come across have taken notice, not that I needed any help defeating them when circumstances dictated such a resolution. So what if I cant hear the radio?! Anyway, just thought it was a funny story, wondering if anyone else has had a similar experiance.
not a similar experience but close me and my friend just unbolted our pipes and got a repair kit from kragen and hung ours....its like a free exhaust system haah...its awesome sounding
Old 09-09-2004, 11:23 PM
  #3  
Member
 
Dave's 89's Avatar
 
Join Date: Dec 2001
Location: Dallas, TX
Posts: 209
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 IROC-Z
Engine: L03
Transmission: T-5
Axle/Gears: 4th Gen/3.42
HaHA, this reminds me of a funny story. I was drivng my Tarus SHOand this total nerd blabbing his cell starts revving his fart can equipped civic hatch. I decide to give em a taste, and as I banged into 2nd the pipe slipped completly out just after the cat. The obnoxious noise scared the poor chap so badly he locked up his brakes and screeched to a complete stop in the middle of the road. Oooh, the look on his face was priceless.
Old 09-10-2004, 07:01 AM
  #4  
Supreme Member
 
Nate86's Avatar
 
Join Date: Jul 2003
Location: Pensacola, FL
Posts: 1,104
Likes: 0
Received 1 Like on 1 Post
Car: 1999 Saturn SL2
Engine: 4 cylinder
Transmission: 4-speed automatic
Not really an exhaust upgrade when the manifolds and y-pipe are still limiting flow.

I did have a similar experience, except with mine the whole exhaust from behind the cat fell just fell off from rusting through. It sucks.
Old 09-10-2004, 10:35 AM
  #5  
Supreme Member

iTrader: (2)
 
mystikkal_69's Avatar
 
Join Date: Jul 2001
Location: San Antonio, TX
Posts: 1,823
Likes: 0
Received 1 Like on 1 Post
Car: 1988 IROC-Z
Engine: L98 (350 TPI)
Transmission: MD8 (700 R4) + 3.42 LS1 Rear
Originally posted by Nate86
Not really an exhaust upgrade when the manifolds and y-pipe are still limiting flow.
unless the muffler was getting clogged.... LOL
Old 09-10-2004, 10:53 AM
  #6  
Supreme Member
 
RB83L69's Avatar
 
Join Date: Jul 1999
Location: Loveland, OH, US
Posts: 18,457
Likes: 0
Received 15 Likes on 15 Posts
Car: 4
Engine: 6
Transmission: 5
I can't believe somebody would talk about a leaky rusted-out stock exhaust falling apart, as an "upgrade".... that's just too low-life for belief.

I guess that sort of thing is why these cars have come around to having a "trailer trash" image in the minds of the general public though, from people who behave like that.
Old 09-10-2004, 11:03 AM
  #7  
Supreme Member

 
Red Devil's Avatar
 
Join Date: Apr 2000
Location: E.B.F. TN
Posts: 3,187
Likes: 0
Received 0 Likes on 0 Posts
Car: Tree Huggers
Engine: Do Not
Transmission: Appreciate Me.
You forgot this RB:

'Cue the banjo music Billy-Bob'

Old 09-10-2004, 11:13 AM
  #8  
Supreme Member

iTrader: (2)
 
Chris89GTA's Avatar
 
Join Date: Feb 2002
Location: Nashville TN
Posts: 1,141
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Trans Am
Engine: 355 HSR
Transmission: Pro-Built 700r4 w/ 3400 converter
Axle/Gears: 10 bolt w/ 3.42 gears
Originally posted by RB83L69
I can't believe somebody would talk about a leaky rusted-out stock exhaust falling apart, as an "upgrade".... that's just too low-life for belief.

I guess that sort of thing is why these cars have come around to having a "trailer trash" image in the minds of the general public though, from people who behave like that.
I have to agree RB...
Old 09-10-2004, 11:28 AM
  #9  
Member
 
Bill87GN's Avatar
 
Join Date: Jul 1999
Location: Boston
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Yehaaw Cletis, why you be cuttin dat dere pipe off. Here, take muh shot gun and shoot a big *** hole through it. Dat be givin you the same sound fo less $$
Old 09-10-2004, 12:04 PM
  #10  
Junior Member

 
novadude's Avatar
 
Join Date: Jul 1999
Location: Pittsburgh, PA
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Guys, I just like to run the y-pipe delete... Imports run for cover when they hear those LG4 manifolds running wide open with no pipes. The flames and stuff are a bonus.
Old 09-10-2004, 01:22 PM
  #11  
TGO Supporter

 
CaysE's Avatar
 
Join Date: Jul 2002
Location: Dirty Jersey
Posts: 3,680
Likes: 0
Received 7 Likes on 3 Posts
Similar story... One day driving to tech school after work, I hit a bump and one of the hangers break off of the pipe leading to the muffler. It actually sounded kinda cool.

Jump to about 9 months later, I was driving home from work and that side of the exhaust drops and hits the ground. I get out of the car, crawl underneath on the side of a one-lane road (the driver's side, mind you) with my work clothes on, and unbolt the hanger that was still good. I threw the muffler in the trunk and drove home, loud as a bus. It's still like that now. It's definitely some crop-picking banjo-plucking fun.

New exhaust in the works.

Last edited by CaysE; 09-10-2004 at 01:24 PM.
Old 09-10-2004, 01:35 PM
  #12  
TGO Supporter
 
CaptPicardsZ28's Avatar
 
Join Date: Oct 2003
Location: ready room
Posts: 2,069
Likes: 0
Received 0 Likes on 0 Posts
Car: NCC-1701-D (docked in AZ)
Engine: impulse drive
Transmission: fusion reactors
Axle/Gears: Rescued from the Borg by my crew
Re: A funny and free exhaust upragde!

Originally posted by KeenEddie
I was driving along a couple weeks ago and I started to hear this rattling sound. I figured it was the stupid heat shield for the cats again, as that has come loose before. However, before I could get down there to tighten it up, it stopped rattling. Cool, I thought, less work for me. Then I thought "hmm, my car was never this loud before!" Sure enough, I crawl under there, and in the pipe leading from the cats to the muffler, theres a fist sized hole right under the seat. I suppose the rattling was the piece of metal coming off.

Funny as it sounds, my car sounds awesome! I cant believe it. I also have vibrating seats now! The local imports ive come across have taken notice, not that I needed any help defeating them when circumstances dictated such a resolution. So what if I cant hear the radio?! Anyway, just thought it was a funny story, wondering if anyone else has had a similar experiance.
Pop a hole in the rear floor board so while you are driving your new upgraded system you can giggle alot as the fumes come back inside the car. We'll also see pics of you in the local star magazine as an alien seen driving the streets at night because your face will turn green from the carbon monoxide. Gotta love it...
Old 09-10-2004, 01:49 PM
  #13  
Supreme Member
 
Nate86's Avatar
 
Join Date: Jul 2003
Location: Pensacola, FL
Posts: 1,104
Likes: 0
Received 1 Like on 1 Post
Car: 1999 Saturn SL2
Engine: 4 cylinder
Transmission: 4-speed automatic
No need to hassel the guy just because his car has developed an exhaust leak. The pipes rust and wear with age.

As far as him considering the leak an "upgrade," I think he was just being facetious. Nothing to get worked up about.
Old 09-10-2004, 02:01 PM
  #14  
Member

 
DonP's Avatar
 
Join Date: Jun 2004
Location: Cincinnati, OH
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 GTA Black/Black lthr
Engine: 305 TPI stock
Transmission: T-5
Axle/Gears: 3.42
It does sound cool...

Unfortunately I have a large crack in my exhaust right after the dual cat Y pipe. But, like he says, it does sound cool.

I'm shopping right now for a dual cat back system, and maybe some cats to go with it. Any suggestions?

P.S. before I get bashed for being a *******, RB drove my car and he didn't object....

P.P.S. sorry - didn't know r*d n*ck was a bad word.

Last edited by DonP; 09-10-2004 at 02:05 PM.
Old 09-10-2004, 03:15 PM
  #15  
Supreme Member
 
br()bert's Avatar
 
Join Date: Nov 2003
Location: Philly
Posts: 1,965
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 firebird
Engine: Pos 2.8 pulled and replaced with a 350 tpi motor converted to carb.
Transmission: 700r4, vette servo,shift kit, hayden 15"x8" trans cooler.
I can see it now. SOmeplace someone is pouring salt water on their exuast pipe trying to make it rust
Old 09-10-2004, 03:22 PM
  #16  
Supreme Member
 
RB83L69's Avatar
 
Join Date: Jul 1999
Location: Loveland, OH, US
Posts: 18,457
Likes: 0
Received 15 Likes on 15 Posts
Car: 4
Engine: 6
Transmission: 5
RB drove my car and he didn't object
I seem to recall pointing out the need at the time, and even discussing aftermarket options.

Yeah, this BBS is set up to disallow all sorts of potentially offensive words; certain ethnic slurs etc., I guess that's somewhat ethnic.
Old 09-10-2004, 05:08 PM
  #17  
Member

 
DonP's Avatar
 
Join Date: Jun 2004
Location: Cincinnati, OH
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 GTA Black/Black lthr
Engine: 305 TPI stock
Transmission: T-5
Axle/Gears: 3.42
RB,

Do you think I should stay dual cat, or just go for something easier? I really need the cat-back (obviously) but I can't put a single cat in unless I get headers like 2055's. So, if I want to go single, I have to do the entire exhaust in one shot. What do you think?

Thanks,

Don
Old 09-10-2004, 06:10 PM
  #18  
Supreme Member
 
RB83L69's Avatar
 
Join Date: Jul 1999
Location: Loveland, OH, US
Posts: 18,457
Likes: 0
Received 15 Likes on 15 Posts
Car: 4
Engine: 6
Transmission: 5
Hmmmm....

I think you'd want to do the whole thing, from the heads to the street, all at once, anyway. At least, if I was in your situation, that's what I'd do. Personally I highly question the value of putting the dual cats back; since the cats you can get nowadays are far better flowing than those were back then, it wouldn't surprise me if you could put a modern single exhaust that was 3" all the way back, and it would far outflow the factory dual cat system, for alot less money. They add little or nothing to the overall picture of a replacement exhaust, regardless of the improvement they made over the factory single setup, in their factory condition.

I think your ideal setup would be SLP headers, ceramic coated; 1-5/8" if you're going to keep the 305, or 1¾" if you're going to upgrade to a 350. A Catco or Car Sound cat. And any of the packaged cat-back systems.

Since you saw my car, I've had to put an exhaust on it; the only 3" one I could find to bolt up directly to mine (the HO 4-bolt flange that they only used for a couple of years), is the Hooker one. It's kind of loud for my taste. Umm, make that extremely loud. It fits great, but it's just louder than I really want. Yours, being newer, there's more available to fit it.
Old 09-10-2004, 06:27 PM
  #19  
Member

 
DonP's Avatar
 
Join Date: Jun 2004
Location: Cincinnati, OH
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 GTA Black/Black lthr
Engine: 305 TPI stock
Transmission: T-5
Axle/Gears: 3.42
I can't remember, but didn't you have a dynamax (sp?) on there before?

I'll take a look at the SLP setup, but I hear a lot of good things of the Hooker 2055. I could get these ceramic coated, the get hooker in the rear to, so everything had better fit right, since it's all from one make!

When I go 350, it will be some time because this 305 is running great. And when I do, I'm not going to fool around. I'm going with a LS6 / T56 combo. Just get it over with in one fell swoop.
Old 09-10-2004, 06:37 PM
  #20  
Junior Member
 
Paipe90GTA's Avatar
 
Join Date: Jul 2003
Location: TX
Posts: 72
Likes: 0
Received 0 Likes on 0 Posts
Car: 90' TA GTA
Engine: 350
I have a similar story thought its not my car or even a 3rd gen,
one of my best friends had a 99 v6 camaro and spent tons of money on the exhuase trying to make it sound like a 8 so one night we were at the drag and right in front of a group of people his muffler breaks off and he drags it with sparks flying everywere for about 50 ft. mind you that was the best that car ever sounded.
Old 09-10-2004, 06:41 PM
  #21  
Member

 
DonP's Avatar
 
Join Date: Jun 2004
Location: Cincinnati, OH
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 GTA Black/Black lthr
Engine: 305 TPI stock
Transmission: T-5
Axle/Gears: 3.42
Once again I have to agree.

With the big hole right after my cats, when I see a cop, I kill the RPM's and it gets a quite deep rumble. When I punch it, it sounds like a NASCAR stock car.

How bad could it be to run exhaust out the back with no muffler? Just straight out to a pair (or single) tail pipe, 3" all the way back?
Old 09-10-2004, 08:03 PM
  #22  
Junior Member
Thread Starter
 
KeenEddie's Avatar
 
Join Date: Jun 2004
Location: North Carolina
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700r4
Yes guys, I was not serious as it being a real upgrade. Take a joke once in awhile, I have more sense than that. It'll be fixed within a couple weeks, so all ya'll gettin on me about exhaust fumes and non-upgrades and how im apparently going to be an alien on star magazine can just back off.

Hmm...perhaps "star" is my fifteen minutes of fame. Nope. Its not.
Old 09-10-2004, 09:37 PM
  #23  
Junior Member

 
82355's Avatar
 
Join Date: Mar 2003
Location: Nebraska
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
I don't think running with out mufflers will hurt anything other than your ears. Have you ever done this? It is neat for a while, then it just gets old. Install a cutout.

Martin
Old 09-11-2004, 04:25 AM
  #24  
Supreme Member

iTrader: (1)
 
porkyzilla's Avatar
 
Join Date: Jul 2002
Location: sacramento, ca USA
Posts: 2,789
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 iroc-z 5.7tpi 350,
Engine: 5.7tpi 350,
Transmission: T-56 fully built WOOHOO
lol this thread is getting funnier....

thats what im runnin when i get the money doing my whole exhaust at once...dual 3 inch to 2 highflow cats straight pipe...just to the cats that will be only thing on my pipes and headers haha......

f*ck the neighbors...
Old 09-11-2004, 07:13 AM
  #25  
Member

 
DonP's Avatar
 
Join Date: Jun 2004
Location: Cincinnati, OH
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 GTA Black/Black lthr
Engine: 305 TPI stock
Transmission: T-5
Axle/Gears: 3.42
Originally posted by 82355
I don't think running with out mufflers will hurt anything other than your ears. Have you ever done this? It is neat for a while, then it just gets old. Install a cutout.

Martin
I can't say I've done this because the hole in my exhaust is like a wedge?

()

So a lot of the exhaust is still going through the mufflers and tailpipes. Mine is like a cutout after the cat, but just a partial cutout.

I like ths sound of it. I think that is all that matters.
Old 09-11-2004, 08:14 AM
  #26  
SSC
Supreme Member

 
SSC's Avatar
 
Join Date: Jul 2001
Location: Pueblo Co
Posts: 3,974
Likes: 0
Received 0 Likes on 0 Posts
Car: No more birdy
Originally posted by DonP
Once again I have to agree.

With the big hole right after my cats, when I see a cop, I kill the RPM's and it gets a quite deep rumble. When I punch it, it sounds like a NASCAR stock car.

How bad could it be to run exhaust out the back with no muffler? Just straight out to a pair (or single) tail pipe, 3" all the way back?
I ran a setup like that, 3in split after the axle to dual outlets no muffler or CC. It sounded real nice. My muffler guy said it sounded like a performance truck setup with flowmasters. It did grow a tad too loud for my taste and the interior started to vibrate loose so I choose to add a muffler again. I actually had cops that live in my neighbor hood ask me where they could get a system that sounded like that for thier off duity rides.
Old 09-11-2004, 04:20 PM
  #27  
Supreme Member

 
88Camaro350's Avatar
 
Join Date: Apr 2003
Location: B'ville, WV
Posts: 1,781
Likes: 0
Received 0 Likes on 0 Posts
Car: 2002 Formula Firebird
Engine: LS1
Transmission: 4l60e
Axle/Gears: 3.23
I had a nice experience once with my true duals.

They were waaaayy to low. One day I went a way I normally didn't because of a car wreck. I went up a very small hill and my passenger side muffler hung up on a man hole cover. Ripped it off completely at the H pipe. Car was loud before but now it was really bad. Drive it for a couple days until I got my edelbrock headers and hooker catback in the mail.
Old 09-12-2004, 09:47 AM
  #28  
Member

 
DonP's Avatar
 
Join Date: Jun 2004
Location: Cincinnati, OH
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 GTA Black/Black lthr
Engine: 305 TPI stock
Transmission: T-5
Axle/Gears: 3.42
OK. While under the car putting in the Aluminum drive shaft, it looks like my exhaust was smashed where the hole is. I really need a new cat back - at least.
Old 09-12-2004, 06:00 PM
  #29  
Supreme Member

iTrader: (3)
 
Marc 85Z28's Avatar
 
Join Date: Jul 1999
Location: MD
Posts: 1,577
Likes: 0
Received 1 Like on 1 Post
After I installed my cam (and addressed a few other things) I broke in the cam with an open y-pipe. I was so excited about the swap that I decided to go for a short drive before putting the rest of the exhaust back on. It was cool for about 5 minutes, and only under heavy throttle. I got tired of it real fast, and so did everyone I drove by, and went straight home. At light throttle/slow speeds I was kind of embarassed - it sounded terrible.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
NastyEngines
Group Purchases
4
09-08-2015 10:14 AM
Hotrodboba400
Firebirds for Sale
0
09-02-2015 07:28 PM
1Aauto
Sponsored Vendors
0
09-02-2015 01:50 PM
1Aauto
Sponsored Vendors
0
09-02-2015 01:35 PM



Quick Reply: A funny and free exhaust upragde!



All times are GMT -5. The time now is 02:19 AM.