MAJOR PROBLEMS!!!!!
07-09-2001, 01:43 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2001
Location: St. Michael, MN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
MAJOR PROBLEMS!!!!!
I took my steering wheel off yesterday and most of the steering column to tighten it all down so it all doesn't wobble. I got it all tightened and was trying to put it together this morning and the ignition won't spring back from start to on. I messed with it for three hours and still can't figure it out. Please, any ideas welcome - is there a spring I am missing or what? Also anybody with a scanner will you please send me an exploded view of the steering column? This will be greatly appreciated. Thank you in advance!
------------------
88 Iroc, 305 TPI, Hypertech chip, K&N's, Airfoil, Flowmaster American Thunder, High-Flow cat, 160 therm. Bosch Platinum +4's, American Racing Rims, Partially gutted airboxes, removed screens from MAF sensor, more mods soon.
"There is no such thing as fast enough"
------------------
88 Iroc, 305 TPI, Hypertech chip, K&N's, Airfoil, Flowmaster American Thunder, High-Flow cat, 160 therm. Bosch Platinum +4's, American Racing Rims, Partially gutted airboxes, removed screens from MAF sensor, more mods soon.
"There is no such thing as fast enough"
07-09-2001, 07:11 PM
#2
Member
Join Date: Jun 2001
Location: Lakeland, Florida
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS Convertible
Engine: 305 TBI
Transmission: 700R4
Look in the archives or posts from the last ten days. Someone has already placed an exploded view of the steering column on this topic.
Don't know where it is exactly, but I know I saw it less than ten days ago.
Don't know where it is exactly, but I know I saw it less than ten days ago.
07-10-2001, 12:31 AM
#3
Junior Member
Thread Starter
Join Date: Jun 2001
Location: St. Michael, MN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the tip. Now I got it back together and the car barely starts and runs like crap. I just paid $600 for a new fuel pressure regulator. They said it was ruptured. I noticed a difference for all of 4 days. It still starts hard and will not even idle right. I am going to bring it back to the shop and have them look again. Any ideas? Thanks!
------------------
88 Iroc, 305 TPI, Hypertech chip, K&N's, Airfoil, Flowmaster American Thunder, High-Flow cat, 160 therm. Bosch Platinum +4's, American Racing Rims, Partially gutted airboxes, removed screens from MAF sensor, more mods soon.
"There is no such thing as fast enough"
------------------
88 Iroc, 305 TPI, Hypertech chip, K&N's, Airfoil, Flowmaster American Thunder, High-Flow cat, 160 therm. Bosch Platinum +4's, American Racing Rims, Partially gutted airboxes, removed screens from MAF sensor, more mods soon.
"There is no such thing as fast enough"
07-12-2001, 07:19 PM
#4
Supreme Member
Join Date: Apr 2000
Location: E.B.F. TN
Posts: 3,187
Likes: 0
Received 0 Likes
on
0 Posts
Car: Tree Huggers
Engine: Do Not
Transmission: Appreciate Me.
<font face="Verdana, Arial" size="2">Originally posted by Dan88Iroc:
...I just paid $600 for a new fuel pressure regulator...It still starts hard and will not even idle right. I am going to bring it back to the shop and have them look again. Any ideas? Thanks!
</font>
...I just paid $600 for a new fuel pressure regulator...It still starts hard and will not even idle right. I am going to bring it back to the shop and have them look again. Any ideas? Thanks!
</font>
Maybe IAC or TPS. Are you throwing codes?
------------------
"Question with boldness even the existence of a God; because, if there be one, he must more approve of the homage of reason, than that of blind-folded fear."
-Thomas Jefferson
Thread
Thread Starter
Forum
Replies
Last Post
