Coolant sensor Questions
05-30-2005, 03:51 PM
#1
Supreme Member
Thread Starter
Join Date: Dec 2002
Location: Kingsport,tn
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro RS
Engine: 305 Carb
Transmission: 700R4
Coolant sensor Questions
I am swapping to a Edelbrock 7101 intake manifold and the coolant sensor off the stock manifold will not fit the new manifold. Can i get a different size at the local auto parts store? If so what do i ask for?
05-30-2005, 10:14 PM
#3
Supreme Member
Thread Starter
Join Date: Dec 2002
Location: Kingsport,tn
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro RS
Engine: 305 Carb
Transmission: 700R4
The holes in the manifold are too big? Look for a bushing.
05-30-2005, 10:20 PM
#4
Moderator
Join Date: Jan 2000
Location: Mercedes Norte, Heredia, Costa Rica
Posts: 20,981
Likes: 0
Received 9 Likes
on
8 Posts
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Any parts store. The manifold and sensor will both have pipe threads, you'll need a bushing that has the larger size on the outside and the smaller size on the inside.
05-31-2005, 10:45 PM
#5
Supreme Member
Thread Starter
Join Date: Dec 2002
Location: Kingsport,tn
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro RS
Engine: 305 Carb
Transmission: 700R4
Will an auto parts store carry them? I looked at auto zone and couldnt find any, but i was in a hurry and didnt look that good. Or do i need to go somewhere like Lowes?
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM
