350 Build
12-05-2005, 06:52 PM
#1
350 Build
This is the setup I'm switching to, wondering what kind of power it'll make:
Stealth Ram (already on my current engine)
AFR 195s
CC503 cam, 224/230 536/544 (with 1.6rr) 112 LSA
58mm TB
30 lb/hr injectors
I don't know if the 58mm TB is too much, there seems to be a debate going on whether there can be a such thing as "too much TB". Some say yes, others say FI is not like a carb so there is no such thing as too much. I'm hoping to see 370rwhp, but that might be a bit out of my reach. My current engine is 10:1 compression with 58cc combustion chambers and a .051 gasket. With 64cc heads and a .015 gasket it should be 10.4:1 right?
Stealth Ram (already on my current engine)
AFR 195s
CC503 cam, 224/230 536/544 (with 1.6rr) 112 LSA
58mm TB
30 lb/hr injectors
I don't know if the 58mm TB is too much, there seems to be a debate going on whether there can be a such thing as "too much TB". Some say yes, others say FI is not like a carb so there is no such thing as too much. I'm hoping to see 370rwhp, but that might be a bit out of my reach. My current engine is 10:1 compression with 58cc combustion chambers and a .051 gasket. With 64cc heads and a .015 gasket it should be 10.4:1 right?
Last edited by Camaroz29; 12-06-2005 at 04:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
0
08-24-2015 09:01 PM