stock 305 cam specs?
10-26-2006, 01:57 PM
#1
Member
Thread Starter
Join Date: May 2003
Location: Ohio
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Firebird S/E
Engine: 350 V8, 4 barrel carb
Transmission: 700 R4 automatic overdrive
stock 305 cam specs?
Just out of curiosity, does anyone know the duration and lift figures for a stock 305 camshaft? I recall these being referred to as the peanut cam and I was curious just how small the stockers were? I have in mind the 1984 vinatage flat tappet. Thanks for any input.
Brad
Brad
10-26-2006, 02:25 PM
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,131
Received 1,691 Likes
on
1,285 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
How small the stockers are....
Let's just say, you could make them totally round, no lumps at all, with a little Clearasil or calamine lotion.
https://www.thirdgen.org/tech-data
Read em and weep. Your LG4 cam is also the 86 LB9 one.
Let's just say, you could make them totally round, no lumps at all, with a little Clearasil or calamine lotion.
https://www.thirdgen.org/tech-data
Read em and weep. Your LG4 cam is also the 86 LB9 one.
10-26-2006, 08:48 PM
#3
Member
Thread Starter
Join Date: May 2003
Location: Ohio
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Firebird S/E
Engine: 350 V8, 4 barrel carb
Transmission: 700 R4 automatic overdrive
Thanks Sofa! I never knew they were that small! I ditched the original 305 and have a better 350 with a better cam in there now. I was thinking of rebuilding the old 305 for another low horsepower commuter type of application. As you said, the lobes are almost non-existant with those specs. Guess anything is an upgrade from there! Thanks for the info. Guess even 1.6 roller rockers won't help much with this one! Now it 's off to the aftermarket cam guys for some options. Again, thanks!
Brad
Brad
Thread
Thread Starter
Forum
Replies
Last Post
