350 build up questions
#1
350 build up questions
1974 350 impala engine swap (bought it with the engine in it) I know the 74 heads are on it but I don't know what has been done internally if anything. It still has the stock 74 exhaust manifolds on it. Worse case senerio is that the guy took the engine and dropped it in the Camaro without doing anything internal to the engine. If that is the case what am I looking for needed upgrades with the engine? What do I need to know about these blocks?
I have planned on a new cam, heads, lifters,pushrods, and an intake.
I have planned on a new cam, heads, lifters,pushrods, and an intake.
#2
Member
Join Date: Oct 2006
Location: Allenhurst, GA
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Car: '81 Z-28
Engine: Soon to be a 383
Transmission: Muncie
Axle/Gears: 3.42
Re: 350 build up questions
A rebuild would be a good idea with an engine that old too. As soon as you start making power, things may start breaking. As for witch parts it depends on the goal and your budget.
#3
Re: 350 build up questions
I am not lookin at much, Maybe about 400-500 horsepower at the flywheel. I will put a different engine in after that but whith the way money is that will be at least 5 years from now, so I need some stuff done to this engine to get it running smooth.
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
08-23-2015 11:49 AM