SES Light won't go off
08-26-2008, 06:25 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2007
Location: P_Ville Ky
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Chevrolet Camaro Z28
Engine: T.P.I. 305
Transmission: 700 R4
Axle/Gears: Richmond 3.73
SES Light won't go off
I have been having trouble with my car, so I finaly figured out that I had 2 bad injectors. So after changing them it seemed to straighten the car up a little. By the way it is a 1991 Z28 TPI 305.
Heres my problem, after installing the injectors ang putting the car back together my SES light came on and the code checked out to be a coolant temperature sensor. So I went to Advance Auto and picked up a new one. Put the new one in and still to no prevail the light it still ther and it stillreads a code 15.
Does anyone know what could be the cause for the SES light other than the temperature sensor on a code 15? Thanks for the help.
Heres my problem, after installing the injectors ang putting the car back together my SES light came on and the code checked out to be a coolant temperature sensor. So I went to Advance Auto and picked up a new one. Put the new one in and still to no prevail the light it still ther and it stillreads a code 15.
Does anyone know what could be the cause for the SES light other than the temperature sensor on a code 15? Thanks for the help.
08-26-2008, 11:54 PM
#2
08-27-2008, 09:59 AM
#4
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
He's saying the light is still coming on, which isn't the same as the codes not being cleared.
08-27-2008, 10:06 AM
#5
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: SES Light won't go off
Yes, but as you know, maybe the original poster doesn't, if the battery is not disconnected for a minute or so, the codes will not clear. Simply unplugging the injectors, replacing the (I know, lots of parts hafta be removed to do this) the code will not clear from the ECM without disconnecting the battery.
08-27-2008, 11:10 AM
#6
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
But, he said the light is still coming on.
Understand if the codes aren't cleared you'll get the same code coming up even if the problem has been fixed and the light isn't coming on anymore. But, if the light is coming on, and that is the only code in memory, it's the same problem.
Understand if the codes aren't cleared you'll get the same code coming up even if the problem has been fixed and the light isn't coming on anymore. But, if the light is coming on, and that is the only code in memory, it's the same problem.
08-27-2008, 05:26 PM
#7
Junior Member
Thread Starter
Join Date: Apr 2007
Location: P_Ville Ky
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Chevrolet Camaro Z28
Engine: T.P.I. 305
Transmission: 700 R4
Axle/Gears: Richmond 3.73
Re: SES Light won't go off
Alright, so I feel kind of dumb....When I was throwing in the new injectors I pulles one of the wires out of the connector going to CTS......Thanks for all the help though
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM
