need help with some swaps
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Zuni, NM
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z-28 al unser silver bullet
Engine: 305 carbed
Transmission: 700R4
Axle/Gears: 3.08
need help with some swaps
ok i got two camaros...
an 1986 z-28 LB9 converted to a carb set up
and an 1989 iroc-z LO3(idk if originally a real irock or RS its got 15inch rims but the iroc decals in the dash n ground effects n the bumper)
but anyway the question is will i get more power with the cam from the iroc engine or should i just leave the z-28 be
the block is shot on the LO3 but the heads and the cam are ok ive checked the tech articles seems like the 86 has more power than the 89iroc.. but since i switched from the 89iroc to 86z28.. the 86 z-28 seems slower
some info on this situation would be nice thanks
an 1986 z-28 LB9 converted to a carb set up
and an 1989 iroc-z LO3(idk if originally a real irock or RS its got 15inch rims but the iroc decals in the dash n ground effects n the bumper)
but anyway the question is will i get more power with the cam from the iroc engine or should i just leave the z-28 be
the block is shot on the LO3 but the heads and the cam are ok ive checked the tech articles seems like the 86 has more power than the 89iroc.. but since i switched from the 89iroc to 86z28.. the 86 z-28 seems slower
some info on this situation would be nice thanks
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The cam is better in the LB9 than the LO3.
The exhaust of an LO3 and LG4 are worse than the LB9.
LG4 exhaust would make an LB9 a dog.
The exhaust of an LO3 and LG4 are worse than the LB9.
LG4 exhaust would make an LB9 a dog.
#3
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Zuni, NM
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z-28 al unser silver bullet
Engine: 305 carbed
Transmission: 700R4
Axle/Gears: 3.08
Re: need help with some swaps
ok i dont want to make it worse than what it is now..
Thread
Thread Starter
Forum
Replies
Last Post