wont start off key....HELP
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: Manchester, KY
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC-Z
Engine: 406 SBC
Transmission: 350 Turbo
Axle/Gears: 4.10 gears
wont start off key....HELP
i recently bought a iroc that has had all the heating and ac stuff took out of behind the dash and sombody cut all the wires they thaught they didnt need off.....the problem is the car wont start off the key. im assuming its the nutural safety switch but they cut the wires off that came to the shifter...so they wired a button up to the sylinoid to start it..is there any wires i can wire together, or maybe put a hot source to one coming out of the steering column to fix this problem? BTW everything worked b4 they started cutting stuff off....or so they say
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Big yellow wire goes from the ignition switch to the neutral safety switch. Big purple wire goes from the neutral safety switch through the firewall bulkhead connector to the starter solenoid.
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM